linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Zi Yan <zi.yan@sent.com>
To: linux-mm@kvack.org
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>,
	Roman Gushchin <guro@fb.com>, Rik van Riel <riel@surriel.com>,
	Matthew Wilcox <willy@infradead.org>,
	Shakeel Butt <shakeelb@google.com>,
	Yang Shi <shy828301@gmail.com>, Jason Gunthorpe <jgg@nvidia.com>,
	Mike Kravetz <mike.kravetz@oracle.com>,
	Michal Hocko <mhocko@suse.com>,
	David Hildenbrand <david@redhat.com>,
	William Kucharski <william.kucharski@oracle.com>,
	Andrea Arcangeli <aarcange@redhat.com>,
	John Hubbard <jhubbard@nvidia.com>,
	David Nellans <dnellans@nvidia.com>,
	linux-kernel@vger.kernel.org, Zi Yan <ziy@nvidia.com>
Subject: [RFC PATCH v2 17/30] mm: thp: PUD THP COW splits PUD page and falls back to PMD page.
Date: Mon, 28 Sep 2020 13:54:15 -0400	[thread overview]
Message-ID: <20200928175428.4110504-18-zi.yan@sent.com> (raw)
In-Reply-To: <20200928175428.4110504-1-zi.yan@sent.com>

From: Zi Yan <ziy@nvidia.com>

COW on PUD THPs has the same behavior as COW on PMD THPs to avoid high
COW overhead. As a result, do_huge_pmd_wp will see PMD-mapped PUD THPs,
thus needs to count PUD mappings in total mapcount when calling
page_trans_huge_map_swapcount in reuse_swap_page to avoid false positive.
Change page_trans_huge_map_swapcount to get it right.

Signed-off-by: Zi Yan <ziy@nvidia.com>
---
 include/linux/huge_mm.h |  5 +++++
 mm/huge_memory.c        | 13 +++++++++++++
 mm/memory.c             |  3 +--
 mm/swapfile.c           |  7 ++++++-
 4 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
index e5c68e680907..589e5af5a1c2 100644
--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -19,6 +19,7 @@ extern int copy_huge_pud(struct mm_struct *dst_mm, struct mm_struct *src_mm,
 #ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
 extern void huge_pud_set_accessed(struct vm_fault *vmf, pud_t orig_pud);
 extern int do_huge_pud_anonymous_page(struct vm_fault *vmf);
+extern vm_fault_t do_huge_pud_wp_page(struct vm_fault *vmf, pud_t orig_pud);
 #else
 static inline void huge_pud_set_accessed(struct vm_fault *vmf, pud_t orig_pud)
 {
@@ -27,6 +28,10 @@ extern int do_huge_pud_anonymous_page(struct vm_fault *vmf)
 {
 	return VM_FAULT_FALLBACK;
 }
+extern vm_fault_t do_huge_pud_wp_page(struct vm_fault *vmf, pud_t orig_pud)
+{
+	return VM_FAULT_FALLBACK;
+}
 #endif
 
 extern vm_fault_t do_huge_pmd_wp_page(struct vm_fault *vmf, pmd_t orig_pmd);
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 4a899e856088..9aa19aa643cd 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1335,6 +1335,19 @@ void huge_pud_set_accessed(struct vm_fault *vmf, pud_t orig_pud)
 unlock:
 	spin_unlock(vmf->ptl);
 }
+
+vm_fault_t do_huge_pud_wp_page(struct vm_fault *vmf, pud_t orig_pud)
+{
+	struct vm_area_struct *vma = vmf->vma;
+
+	/*
+	 * split pud directly. a whole pud page is not swappable, so there is
+	 * no need to try reuse_swap_page
+	 */
+	__split_huge_pud(vma, vmf->pud, vmf->address, false, NULL);
+	return VM_FAULT_FALLBACK;
+}
+
 #endif /* CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD */
 
 void huge_pmd_set_accessed(struct vm_fault *vmf, pmd_t orig_pmd)
diff --git a/mm/memory.c b/mm/memory.c
index e0e0459c0caf..ab80d13807aa 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -4141,9 +4141,8 @@ static vm_fault_t create_huge_pud(struct vm_fault *vmf)
 static vm_fault_t wp_huge_pud(struct vm_fault *vmf, pud_t orig_pud)
 {
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
-	/* No support for anonymous transparent PUD pages yet */
 	if (vma_is_anonymous(vmf->vma))
-		return VM_FAULT_FALLBACK;
+		return do_huge_pud_wp_page(vmf, orig_pud);
 	if (vmf->vma->vm_ops->huge_fault)
 		return vmf->vma->vm_ops->huge_fault(vmf, PE_SIZE_PUD);
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 495ecdbd7859..a6989b0c4d44 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1635,7 +1635,12 @@ static int page_trans_huge_map_swapcount(struct page *page, int *total_mapcount,
 	/* hugetlbfs shouldn't call it */
 	VM_BUG_ON_PAGE(PageHuge(page), page);
 
-	if (!IS_ENABLED(CONFIG_THP_SWAP) || likely(!PageTransCompound(page))) {
+	if (!IS_ENABLED(CONFIG_THP_SWAP) || likely(!PageTransCompound(page)) ||
+	    /*
+	     * PMD-mapped PUD THP need to take PUD mappings into account by
+	     * using page_trans_huge_mapcount
+	     */
+	    unlikely(thp_order(page) == HPAGE_PUD_ORDER)) {
 		mapcount = page_trans_huge_mapcount(page, total_mapcount);
 		if (PageSwapCache(page))
 			swapcount = page_swapcount(page);
-- 
2.28.0



  parent reply	other threads:[~2020-09-28 17:56 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-28 17:53 [RFC PATCH v2 00/30] 1GB PUD THP support on x86_64 Zi Yan
2020-09-28 17:53 ` [RFC PATCH v2 01/30] mm/pagewalk: use READ_ONCE when reading the PUD entry unlocked Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 02/30] mm: pagewalk: use READ_ONCE when reading the PMD " Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 03/30] mm: thp: use single linked list for THP page table page deposit Zi Yan
2020-09-28 19:34   ` Matthew Wilcox
2020-09-28 20:34     ` Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 04/30] mm: add new helper functions to allocate one PMD page with 512 PTE pages Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 05/30] mm: thp: add page table deposit/withdraw functions for PUD THP Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 06/30] mm: change thp_order and thp_nr as we will have not just PMD THPs Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 07/30] mm: thp: add anonymous PUD THP page fault support without enabling it Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 08/30] mm: thp: add PUD THP support for copy_huge_pud Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 09/30] mm: thp: add PUD THP support to zap_huge_pud Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 10/30] fs: proc: add PUD THP kpageflag Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 11/30] mm: thp: handling PUD THP reference bit Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 12/30] mm: rmap: add mappped/unmapped page order to anonymous page rmap functions Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 13/30] mm: rmap: add map_order to page_remove_anon_compound_rmap Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 14/30] mm: thp: add PUD THP split_huge_pud_page() function Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 15/30] mm: thp: add PUD THP to deferred split list when PUD mapping is gone Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 16/30] mm: debug: adapt dump_page to PUD THP Zi Yan
2020-09-28 17:54 ` Zi Yan [this message]
2020-09-28 17:54 ` [RFC PATCH v2 18/30] mm: thp: PUD THP follow_p*d_page() support Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 19/30] mm: stats: make smap stats understand PUD THPs Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 20/30] mm: page_vma_walk: teach it about PMD-mapped PUD THP Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 21/30] mm: thp: PUD THP support in try_to_unmap() Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 22/30] mm: thp: split PUD THPs at page reclaim Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 23/30] mm: support PUD THP pagemap support Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 24/30] mm: madvise: add page size options to MADV_HUGEPAGE and MADV_NOHUGEPAGE Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 25/30] mm: vma: add VM_HUGEPAGE_PUD to vm_flags at bit 37 Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 26/30] mm: thp: add a global knob to enable/disable PUD THPs Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 27/30] mm: thp: make PUD THP size public Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 28/30] hugetlb: cma: move cma reserve function to cma.c Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 29/30] mm: thp: use cma reservation for pud thp allocation Zi Yan
2020-09-28 17:54 ` [RFC PATCH v2 30/30] mm: thp: enable anonymous PUD THP at page fault path Zi Yan
2020-09-30 11:55 ` [RFC PATCH v2 00/30] 1GB PUD THP support on x86_64 Michal Hocko
2020-10-01 15:14   ` Zi Yan
2020-10-02  7:32     ` Michal Hocko
2020-10-02  7:50       ` David Hildenbrand
2020-10-02  8:10         ` Michal Hocko
2020-10-02  8:30           ` David Hildenbrand
2020-10-05 15:03             ` Zi Yan
2020-10-05 15:55               ` Matthew Wilcox
2020-10-05 17:04                 ` Roman Gushchin
2020-10-05 19:12                 ` Zi Yan
2020-10-05 19:37                   ` Matthew Wilcox
2020-10-05 17:16               ` Roman Gushchin
2020-10-05 17:27                 ` David Hildenbrand
2020-10-05 18:25                   ` Roman Gushchin
2020-10-05 18:33                     ` David Hildenbrand
2020-10-05 19:11                       ` Roman Gushchin
2020-10-06  8:25                         ` David Hildenbrand
2020-10-05 17:39               ` David Hildenbrand
2020-10-05 18:05                 ` Zi Yan
2020-10-05 18:48                   ` David Hildenbrand
2020-10-06 11:59                   ` Michal Hocko
2020-10-05 15:34         ` Zi Yan
2020-10-05 17:30           ` David Hildenbrand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200928175428.4110504-18-zi.yan@sent.com \
    --to=zi.yan@sent.com \
    --cc=aarcange@redhat.com \
    --cc=david@redhat.com \
    --cc=dnellans@nvidia.com \
    --cc=guro@fb.com \
    --cc=jgg@nvidia.com \
    --cc=jhubbard@nvidia.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=mike.kravetz@oracle.com \
    --cc=riel@surriel.com \
    --cc=shakeelb@google.com \
    --cc=shy828301@gmail.com \
    --cc=william.kucharski@oracle.com \
    --cc=willy@infradead.org \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox