From: Jean-Philippe Brucker <jean-philippe@linaro.org>
To: iommu@lists.linux-foundation.org,
linux-arm-kernel@lists.infradead.org, linux-mm@kvack.org
Cc: joro@8bytes.org, catalin.marinas@arm.com, will@kernel.org,
robin.murphy@arm.com, baolu.lu@linux.intel.com,
Jonathan.Cameron@huawei.com, jacob.jun.pan@linux.intel.com,
zhangfei.gao@linaro.org, xuzaibo@huawei.com,
zhengxiang9@huawei.com, fenghua.yu@intel.com, hch@infradead.org,
Jean-Philippe Brucker <jean-philippe@linaro.org>
Subject: [PATCH v8 05/12] iommu/io-pgtable-arm: Move some definitions to a header
Date: Thu, 18 Jun 2020 17:51:18 +0200 [thread overview]
Message-ID: <20200618155125.1548969-6-jean-philippe@linaro.org> (raw)
In-Reply-To: <20200618155125.1548969-1-jean-philippe@linaro.org>
Extract some of the most generic TCR defines, so they can be reused by
the page table sharing code.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
drivers/iommu/io-pgtable-arm.h | 30 ++++++++++++++++++++++++++++++
drivers/iommu/io-pgtable-arm.c | 27 ++-------------------------
MAINTAINERS | 3 +--
3 files changed, 33 insertions(+), 27 deletions(-)
create mode 100644 drivers/iommu/io-pgtable-arm.h
diff --git a/drivers/iommu/io-pgtable-arm.h b/drivers/iommu/io-pgtable-arm.h
new file mode 100644
index 0000000000000..ba7cfdf7afa03
--- /dev/null
+++ b/drivers/iommu/io-pgtable-arm.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef IO_PGTABLE_ARM_H_
+#define IO_PGTABLE_ARM_H_
+
+#define ARM_LPAE_TCR_TG0_4K 0
+#define ARM_LPAE_TCR_TG0_64K 1
+#define ARM_LPAE_TCR_TG0_16K 2
+
+#define ARM_LPAE_TCR_TG1_16K 1
+#define ARM_LPAE_TCR_TG1_4K 2
+#define ARM_LPAE_TCR_TG1_64K 3
+
+#define ARM_LPAE_TCR_SH_NS 0
+#define ARM_LPAE_TCR_SH_OS 2
+#define ARM_LPAE_TCR_SH_IS 3
+
+#define ARM_LPAE_TCR_RGN_NC 0
+#define ARM_LPAE_TCR_RGN_WBWA 1
+#define ARM_LPAE_TCR_RGN_WT 2
+#define ARM_LPAE_TCR_RGN_WB 3
+
+#define ARM_LPAE_TCR_PS_32_BIT 0x0ULL
+#define ARM_LPAE_TCR_PS_36_BIT 0x1ULL
+#define ARM_LPAE_TCR_PS_40_BIT 0x2ULL
+#define ARM_LPAE_TCR_PS_42_BIT 0x3ULL
+#define ARM_LPAE_TCR_PS_44_BIT 0x4ULL
+#define ARM_LPAE_TCR_PS_48_BIT 0x5ULL
+#define ARM_LPAE_TCR_PS_52_BIT 0x6ULL
+
+#endif /* IO_PGTABLE_ARM_H_ */
diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
index 04fbd4bf0ff9f..f71a2eade04ab 100644
--- a/drivers/iommu/io-pgtable-arm.c
+++ b/drivers/iommu/io-pgtable-arm.c
@@ -20,6 +20,8 @@
#include <asm/barrier.h>
+#include "io-pgtable-arm.h"
+
#define ARM_LPAE_MAX_ADDR_BITS 52
#define ARM_LPAE_S2_MAX_CONCAT_PAGES 16
#define ARM_LPAE_MAX_LEVELS 4
@@ -100,23 +102,6 @@
#define ARM_LPAE_PTE_MEMATTR_DEV (((arm_lpae_iopte)0x1) << 2)
/* Register bits */
-#define ARM_LPAE_TCR_TG0_4K 0
-#define ARM_LPAE_TCR_TG0_64K 1
-#define ARM_LPAE_TCR_TG0_16K 2
-
-#define ARM_LPAE_TCR_TG1_16K 1
-#define ARM_LPAE_TCR_TG1_4K 2
-#define ARM_LPAE_TCR_TG1_64K 3
-
-#define ARM_LPAE_TCR_SH_NS 0
-#define ARM_LPAE_TCR_SH_OS 2
-#define ARM_LPAE_TCR_SH_IS 3
-
-#define ARM_LPAE_TCR_RGN_NC 0
-#define ARM_LPAE_TCR_RGN_WBWA 1
-#define ARM_LPAE_TCR_RGN_WT 2
-#define ARM_LPAE_TCR_RGN_WB 3
-
#define ARM_LPAE_VTCR_SL0_MASK 0x3
#define ARM_LPAE_TCR_T0SZ_SHIFT 0
@@ -124,14 +109,6 @@
#define ARM_LPAE_VTCR_PS_SHIFT 16
#define ARM_LPAE_VTCR_PS_MASK 0x7
-#define ARM_LPAE_TCR_PS_32_BIT 0x0ULL
-#define ARM_LPAE_TCR_PS_36_BIT 0x1ULL
-#define ARM_LPAE_TCR_PS_40_BIT 0x2ULL
-#define ARM_LPAE_TCR_PS_42_BIT 0x3ULL
-#define ARM_LPAE_TCR_PS_44_BIT 0x4ULL
-#define ARM_LPAE_TCR_PS_48_BIT 0x5ULL
-#define ARM_LPAE_TCR_PS_52_BIT 0x6ULL
-
#define ARM_LPAE_MAIR_ATTR_SHIFT(n) ((n) << 3)
#define ARM_LPAE_MAIR_ATTR_MASK 0xff
#define ARM_LPAE_MAIR_ATTR_DEVICE 0x04
diff --git a/MAINTAINERS b/MAINTAINERS
index 68f21d46614c4..2e3220273e4d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1499,8 +1499,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/iommu/arm,smmu*
F: drivers/iommu/arm-smmu*
-F: drivers/iommu/io-pgtable-arm-v7s.c
-F: drivers/iommu/io-pgtable-arm.c
+F: drivers/iommu/io-pgtable-arm*
ARM SUB-ARCHITECTURES
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
--
2.27.0
next prev parent reply other threads:[~2020-06-18 15:52 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-18 15:51 [PATCH v8 00/12] iommu: Shared Virtual Addressing for SMMUv3 (PT sharing part) Jean-Philippe Brucker
2020-06-18 15:51 ` [PATCH v8 01/12] mm: Define pasid in mm Jean-Philippe Brucker
2020-06-18 15:51 ` [PATCH v8 02/12] iommu/ioasid: Add ioasid references Jean-Philippe Brucker
2020-06-18 15:51 ` [PATCH v8 03/12] iommu/sva: Add PASID helpers Jean-Philippe Brucker
2020-06-19 7:37 ` Lu Baolu
2020-06-18 15:51 ` [PATCH v8 04/12] arm64: mm: Pin down ASIDs for sharing mm with devices Jean-Philippe Brucker
2020-07-13 15:46 ` Will Deacon
2020-07-16 15:44 ` Jean-Philippe Brucker
2020-06-18 15:51 ` Jean-Philippe Brucker [this message]
2020-06-18 15:51 ` [PATCH v8 06/12] arm64: cpufeature: Export symbol read_sanitised_ftr_reg() Jean-Philippe Brucker
2020-06-18 15:51 ` [PATCH v8 07/12] iommu/arm-smmu-v3: Share process page tables Jean-Philippe Brucker
2020-07-13 20:22 ` Will Deacon
2020-07-16 15:45 ` Jean-Philippe Brucker
2020-06-18 15:51 ` [PATCH v8 08/12] iommu/arm-smmu-v3: Seize private ASID Jean-Philippe Brucker
2020-07-06 12:40 ` Xiang Zheng
2020-07-06 16:07 ` Jean-Philippe Brucker
2020-06-18 15:51 ` [PATCH v8 09/12] iommu/arm-smmu-v3: Check for SVA features Jean-Philippe Brucker
2020-06-18 15:51 ` [PATCH v8 10/12] iommu/arm-smmu-v3: Add SVA device feature Jean-Philippe Brucker
2020-06-18 15:51 ` [PATCH v8 11/12] iommu/arm-smmu-v3: Implement iommu_sva_bind/unbind() Jean-Philippe Brucker
2020-06-18 15:51 ` [PATCH v8 12/12] iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops Jean-Philippe Brucker
2020-07-09 9:39 ` [PATCH v8 00/12] iommu: Shared Virtual Addressing for SMMUv3 (PT sharing part) Jean-Philippe Brucker
2020-07-20 11:11 ` Will Deacon
2020-07-20 15:39 ` Jean-Philippe Brucker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200618155125.1548969-6-jean-philippe@linaro.org \
--to=jean-philippe@linaro.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=baolu.lu@linux.intel.com \
--cc=catalin.marinas@arm.com \
--cc=fenghua.yu@intel.com \
--cc=hch@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jacob.jun.pan@linux.intel.com \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mm@kvack.org \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
--cc=xuzaibo@huawei.com \
--cc=zhangfei.gao@linaro.org \
--cc=zhengxiang9@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox