From: Vlastimil Babka <vbabka@suse.cz>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
kasan-dev@googlegroups.com, Qian Cai <cai@lca.pw>,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Matthew Wilcox <willy@infradead.org>,
Mel Gorman <mgorman@techsingularity.net>,
Michal Hocko <mhocko@kernel.org>,
Vlastimil Babka <vbabka@suse.cz>,
Dmitry Vyukov <dvyukov@google.com>,
Walter Wu <walter-zh.wu@mediatek.com>,
Andrey Ryabinin <aryabinin@virtuozzo.com>
Subject: [PATCH 2/3] mm, debug, kasan: save and dump freeing stack trace for kasan
Date: Wed, 25 Sep 2019 16:30:51 +0200 [thread overview]
Message-ID: <20190925143056.25853-3-vbabka@suse.cz> (raw)
In-Reply-To: <20190925143056.25853-1-vbabka@suse.cz>
The commit 8974558f49a6 ("mm, page_owner, debug_pagealloc: save and dump
freeing stack trace") enhanced page_owner to also store freeing stack trace,
when debug_pagealloc is also enabled. KASAN would also like to do this [1] to
improve error reports to debug e.g. UAF issues. This patch therefore introduces
a helper config option PAGE_OWNER_FREE_STACK, which is enabled when PAGE_OWNER
and either of DEBUG_PAGEALLOC or KASAN is enabled. Boot-time, the free stack
saving is enabled when booting a KASAN kernel with page_owner=on, or non-KASAN
kernel with debug_pagealloc=on and page_owner=on.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=203967
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
---
Documentation/dev-tools/kasan.rst | 4 ++++
mm/Kconfig.debug | 4 ++++
mm/page_owner.c | 31 ++++++++++++++++++-------------
3 files changed, 26 insertions(+), 13 deletions(-)
diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
index b72d07d70239..434e605030e9 100644
--- a/Documentation/dev-tools/kasan.rst
+++ b/Documentation/dev-tools/kasan.rst
@@ -41,6 +41,10 @@ smaller binary while the latter is 1.1 - 2 times faster.
Both KASAN modes work with both SLUB and SLAB memory allocators.
For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
+To augment reports with last allocation and freeing stack of the physical
+page, it is recommended to configure kernel also with CONFIG_PAGE_OWNER = y
+and boot with page_owner=on.
+
To disable instrumentation for specific files or directories, add a line
similar to the following to the respective kernel Makefile:
diff --git a/mm/Kconfig.debug b/mm/Kconfig.debug
index 327b3ebf23bf..1ea247da3322 100644
--- a/mm/Kconfig.debug
+++ b/mm/Kconfig.debug
@@ -62,6 +62,10 @@ config PAGE_OWNER
If unsure, say N.
+config PAGE_OWNER_FREE_STACK
+ def_bool KASAN || DEBUG_PAGEALLOC
+ depends on PAGE_OWNER
+
config PAGE_POISONING
bool "Poison pages after freeing"
select PAGE_POISONING_NO_SANITY if HIBERNATION
diff --git a/mm/page_owner.c b/mm/page_owner.c
index d3cf5d336ccf..f3aeec78822f 100644
--- a/mm/page_owner.c
+++ b/mm/page_owner.c
@@ -24,13 +24,14 @@ struct page_owner {
short last_migrate_reason;
gfp_t gfp_mask;
depot_stack_handle_t handle;
-#ifdef CONFIG_DEBUG_PAGEALLOC
+#ifdef CONFIG_PAGE_OWNER_FREE_STACK
depot_stack_handle_t free_handle;
#endif
};
static bool page_owner_disabled = true;
DEFINE_STATIC_KEY_FALSE(page_owner_inited);
+static DEFINE_STATIC_KEY_FALSE(page_owner_free_stack);
static depot_stack_handle_t dummy_handle;
static depot_stack_handle_t failure_handle;
@@ -91,6 +92,8 @@ static void init_page_owner(void)
register_failure_stack();
register_early_stack();
static_branch_enable(&page_owner_inited);
+ if (IS_ENABLED(CONFIG_KASAN) || debug_pagealloc_enabled())
+ static_branch_enable(&page_owner_free_stack);
init_early_allocated_pages();
}
@@ -148,11 +151,11 @@ void __reset_page_owner(struct page *page, unsigned int order)
{
int i;
struct page_ext *page_ext;
-#ifdef CONFIG_DEBUG_PAGEALLOC
+#ifdef CONFIG_PAGE_OWNER_FREE_STACK
depot_stack_handle_t handle = 0;
struct page_owner *page_owner;
- if (debug_pagealloc_enabled())
+ if (static_branch_unlikely(&page_owner_free_stack))
handle = save_stack(GFP_NOWAIT | __GFP_NOWARN);
#endif
@@ -161,8 +164,8 @@ void __reset_page_owner(struct page *page, unsigned int order)
return;
for (i = 0; i < (1 << order); i++) {
__clear_bit(PAGE_EXT_OWNER_ACTIVE, &page_ext->flags);
-#ifdef CONFIG_DEBUG_PAGEALLOC
- if (debug_pagealloc_enabled()) {
+#ifdef CONFIG_PAGE_OWNER_FREE_STACK
+ if (static_branch_unlikely(&page_owner_free_stack)) {
page_owner = get_page_owner(page_ext);
page_owner->free_handle = handle;
}
@@ -450,14 +453,16 @@ void __dump_page_owner(struct page *page)
stack_trace_print(entries, nr_entries, 0);
}
-#ifdef CONFIG_DEBUG_PAGEALLOC
- handle = READ_ONCE(page_owner->free_handle);
- if (!handle) {
- pr_alert("page_owner free stack trace missing\n");
- } else {
- nr_entries = stack_depot_fetch(handle, &entries);
- pr_alert("page last free stack trace:\n");
- stack_trace_print(entries, nr_entries, 0);
+#ifdef CONFIG_PAGE_OWNER_FREE_STACK
+ if (static_branch_unlikely(&page_owner_free_stack)) {
+ handle = READ_ONCE(page_owner->free_handle);
+ if (!handle) {
+ pr_alert("page_owner free stack trace missing\n");
+ } else {
+ nr_entries = stack_depot_fetch(handle, &entries);
+ pr_alert("page last free stack trace:\n");
+ stack_trace_print(entries, nr_entries, 0);
+ }
}
#endif
--
2.23.0
next prev parent reply other threads:[~2019-09-25 14:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-25 14:30 [PATCH 0/3] followups to debug_pagealloc improvements through page_owner Vlastimil Babka
2019-09-25 14:30 ` [PATCH 1/3] mm, page_owner: fix off-by-one error in __set_page_owner_handle() Vlastimil Babka
2019-09-26 9:09 ` Kirill A. Shutemov
2019-09-25 14:30 ` Vlastimil Babka [this message]
2019-09-26 9:16 ` [PATCH 2/3] mm, debug, kasan: save and dump freeing stack trace for kasan Kirill A. Shutemov
2019-09-26 9:27 ` Vlastimil Babka
2019-09-25 14:30 ` [PATCH 3/3] mm, page_owner: rename flag indicating that page is allocated Vlastimil Babka
2019-09-26 9:18 ` Kirill A. Shutemov
2019-09-26 9:26 ` Vlastimil Babka
2019-09-25 14:30 ` [PATCH 0/3] followups to debug_pagealloc improvements through page_owner Vlastimil Babka
2019-09-25 14:30 ` [PATCH 1/3] mm, page_owner: fix off-by-one error in __set_page_owner_handle() Vlastimil Babka
2019-09-25 14:30 ` [PATCH 2/3] mm, debug, kasan: save and dump freeing stack trace for kasan Vlastimil Babka
2019-09-25 14:30 ` [PATCH 3/3] mm, page_owner: rename flag indicating that page is allocated Vlastimil Babka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190925143056.25853-3-vbabka@suse.cz \
--to=vbabka@suse.cz \
--cc=akpm@linux-foundation.org \
--cc=aryabinin@virtuozzo.com \
--cc=cai@lca.pw \
--cc=dvyukov@google.com \
--cc=kasan-dev@googlegroups.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@techsingularity.net \
--cc=mhocko@kernel.org \
--cc=walter-zh.wu@mediatek.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox