linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Bharath Vedartham <linux.bhar@gmail.com>
To: Vlastimil Babka <vbabka@suse.cz>
Cc: Alan Jenkins <alan.christopher.jenkins@gmail.com>,
	Mel Gorman <mgorman@techsingularity.net>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: Re: [PATCH] mm: fix setting the high and low watermarks
Date: Fri, 21 Jun 2019 19:37:17 +0530	[thread overview]
Message-ID: <20190621140717.GA28387@bharath12345-Inspiron-5559> (raw)
In-Reply-To: <3d15b808-b7cd-7379-a6a9-d3cf04b7dcec@suse.cz>

On Fri, Jun 21, 2019 at 02:09:31PM +0200, Vlastimil Babka wrote:
> On 6/21/19 1:43 PM, Alan Jenkins wrote:
> > When setting the low and high watermarks we use min_wmark_pages(zone).
> > I guess this is to reduce the line length.  But we forgot that this macro
> > includes zone->watermark_boost.  We need to reset zone->watermark_boost
> > first.  Otherwise the watermarks will be set inconsistently.
> > 
> > E.g. this could cause inconsistent values if the watermarks have been
> > boosted, and then you change a sysctl which triggers
> > __setup_per_zone_wmarks().
> > 
> > I strongly suspect this explains why I have seen slightly high watermarks.
> > Suspicious-looking zoneinfo below - notice high-low != low-min.
> > 
> > Node 0, zone   Normal
> >   pages free     74597
> >         min      9582
> >         low      34505
> >         high     36900
> > 
> > https://unix.stackexchange.com/questions/525674/my-low-and-high-watermarks-seem-higher-than-predicted-by-documentation-sysctl-vm/525687
> > 
> > Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
> > Fixes: 1c30844d2dfe ("mm: reclaim small amounts of memory when an external
> >                       fragmentation event occurs")
> > Cc: stable@vger.kernel.org
> 
> Nice catch, thanks!
> 
> Acked-by: Vlastimil Babka <vbabka@suse.cz>
> 
> Personally I would implement it a bit differently, see below. If you
> agree, it's fine if you keep the authorship of the whole patch.
> 
> > ---
> > 
> > Tested by compiler :-).
> > 
> > Ideally the commit message would be clear about what happens the
> > *first* time __setup_per_zone_watermarks() is called.  I guess that
> > zone->watermark_boost is *usually* zero, or we would have noticed
> > some wild problems :-).  However I am not familiar with how the zone
> > structures are allocated & initialized.  Maybe there is a case where
> > zone->watermark_boost could contain an arbitrary unitialized value
> > at this point.  Can we rule that out?
> 
> Dunno if there's some arch override, but generic_alloc_nodedata() uses
> kzalloc() so it's zeroed.
> 
> -----8<-----
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index d66bc8abe0af..3b2f0cedf78e 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -7624,6 +7624,7 @@ static void __setup_per_zone_wmarks(void)
>  
>  	for_each_zone(zone) {
>  		u64 tmp;
> +		unsigned long wmark_min;
>  
>  		spin_lock_irqsave(&zone->lock, flags);
>  		tmp = (u64)pages_min * zone_managed_pages(zone);
> @@ -7642,13 +7643,13 @@ static void __setup_per_zone_wmarks(void)
>  
>  			min_pages = zone_managed_pages(zone) / 1024;
>  			min_pages = clamp(min_pages, SWAP_CLUSTER_MAX, 128UL);
> -			zone->_watermark[WMARK_MIN] = min_pages;
> +			wmark_min = min_pages;
>  		} else {
>  			/*
>  			 * If it's a lowmem zone, reserve a number of pages
>  			 * proportionate to the zone's size.
>  			 */
> -			zone->_watermark[WMARK_MIN] = tmp;
> +			wmark_min = tmp;
>  		}
>  
>  		/*
> @@ -7660,8 +7661,9 @@ static void __setup_per_zone_wmarks(void)
>  			    mult_frac(zone_managed_pages(zone),
>  				      watermark_scale_factor, 10000));
>  
> -		zone->_watermark[WMARK_LOW]  = min_wmark_pages(zone) + tmp;
> -		zone->_watermark[WMARK_HIGH] = min_wmark_pages(zone) + tmp * 2;
> +		zone->_watermark[WMARK_MIN]  = wmark_min;
> +		zone->_watermark[WMARK_LOW]  = wmark_min + tmp;
> +		zone->_watermark[WMARK_HIGH] = wmark_min + tmp * 2;
>  		zone->watermark_boost = 0;
Do you think this could cause a race condition between
__setup_per_zone_wmarks and pgdat_watermark_boosted which checks whether
the watermark_boost of each zone is non-zero? pgdat_watermark_boosted is
not called with a zone lock.
Here is a probable case scenario:
watermarks are boosted in steal_suitable_fallback(which happens under a
zone lock). After that kswapd is woken up by
wakeup_kswapd(zone,0,0,zone_idx(zone)) in rmqueue without holding a
zone lock. Lets say someone modified min_kfree_bytes, this would lead to
all the zone->watermark_boost being set to 0. This may cause
pgdat_watermark_boosted to return false, which would not wakeup kswapd
as intended by boosting the watermark. This behaviour is similar to waking up kswapd for a
balanced node.

Also if kswapd was woken up successfully because of watermarks being
boosted. In balance_pgdat, we use nr_boost_reclaim to count number of
pages to reclaim because of boosting. nr_boost_reclaim is calculated as:
nr_boost_reclaim = 0;
for (i = 0; i <= classzone_idx; i++) {
	zone = pgdat->node_zones + i;
	if (!managed_zone(zone))
		continue;

	nr_boost_reclaim += zone->watermark_boost;
	zone_boosts[i] = zone->watermark_boost;
}
boosted = nr_boost_reclaim;

This is not under a zone_lock. This could lead to nr_boost_reclaim to
be 0 if min_kfree_bytes is set to 0. Which would wake up kcompactd
without reclaiming memory. 
kcompactd compaction might be spurious if the if the memory reclaim step is not happening?

Any thoughts?
>  		spin_unlock_irqrestore(&zone->lock, flags);
>


  reply	other threads:[~2019-06-21 14:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-21 11:43 Alan Jenkins
2019-06-21 12:09 ` Vlastimil Babka
2019-06-21 14:07   ` Bharath Vedartham [this message]
2019-06-24  5:46     ` Vlastimil Babka
2019-06-21 15:31   ` [PATCH v2] mm: avoid inconsistent "boosts" when updating " Alan Jenkins
2019-06-21 20:58     ` David Rientjes
2019-06-21 14:16 ` [PATCH] mm: fix setting " Mel Gorman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190621140717.GA28387@bharath12345-Inspiron-5559 \
    --to=linux.bhar@gmail.com \
    --cc=alan.christopher.jenkins@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@techsingularity.net \
    --cc=stable@vger.kernel.org \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox