Re: Banana Pi-R1 stabil

[Maxime Ripard <maxime.ripard@bootlin.com>]

[-- Attachment #1: Type: text/plain, Size: 3852 bytes --]

On Wed, Feb 27, 2019 at 07:58:14PM +0100, Gerhard Wiesinger wrote:
> On 27.02.2019 10:20, Maxime Ripard wrote:
> > On Sun, Feb 24, 2019 at 09:04:57AM +0100, Gerhard Wiesinger wrote:
> > > Hello,
> > > 
> > > I've 3 Banana Pi R1, one running with self compiled kernel
> > > 4.7.4-200.BPiR1.fc24.armv7hl and old Fedora 25 which is VERY STABLE, the 2
> > > others are running with Fedora 29 latest, kernel 4.20.10-200.fc29.armv7hl. I
> > > tried a lot of kernels between of around 4.11
> > > (kernel-4.11.10-200.fc25.armv7hl) until 4.20.10 but all had crashes without
> > > any output on the serial console or kernel panics after a short time of
> > > period (minutes, hours, max. days)
> > > 
> > > Latest known working and stable self compiled kernel: kernel
> > > 4.7.4-200.BPiR1.fc24.armv7hl:
> > > 
> > > https://www.wiesinger.com/opensource/fedora/kernel/BananaPi-R1/
> > > 
> > > With 4.8.x the DSA b53 switch infrastructure has been introduced which
> > > didn't work (until ca8931948344c485569b04821d1f6bcebccd376b and kernel
> > > 4.18.x):
> > > 
> > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/dsa/b53?h=v4.20.12
> > > 
> > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/drivers/net/dsa/b53?h=v4.20.12
> > > 
> > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/net/dsa/b53?h=v4.20.12&id=ca8931948344c485569b04821d1f6bcebccd376b
> > > 
> > > I has been fixed with kernel 4.18.x:
> > > 
> > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/drivers/net/dsa/b53?h=linux-4.18.y
> > > 
> > > 
> > > So current status is, that kernel crashes regularly, see some samples below.
> > > It is typically a "Unable to handle kernel paging request at virtual addres"
> > > 
> > > Another interesting thing: A Banana Pro works well (which has also an
> > > Allwinner A20 in the same revision) running same Fedora 29 and latest
> > > kernels (e.g. kernel 4.20.10-200.fc29.armv7hl.).
> > > 
> > > Since it happens on 2 different devices and with different power supplies
> > > (all with enough power) and also the same type which works well on the
> > > working old kernel) a hardware issue is very unlikely.
> > > 
> > > I guess it has something to do with virtual memory.
> > > 
> > > Any ideas?
> > > [47322.960193] Unable to handle kernel paging request at virtual addres 5675d0
> > That line is a bit suspicious
> > 
> > Anyway, cpufreq is known to cause those kind of errors when the
> > voltage / frequency association is not correct.
> > 
> > Given the stack trace and that the BananaPro doesn't have cpufreq
> > enabled, my first guess would be that it's what's happening. Could you
> > try using the performance governor and see if it's more stable?
> > 
> > If it is, then using this:
> > https://github.com/ssvb/cpuburn-arm/blob/master/cpufreq-ljt-stress-test
> > 
> > will help you find the offending voltage-frequency couple.
>
> For me it looks like they have all the same config regarding cpu governor
> (Banana Pro, old kernel stable one, new kernel unstable ones)

The Banana Pro doesn't have a regulator set up, so it will only change
the frequency, not the voltage.

> They all have the ondemand governor set:
> 
> I set on the 2 unstable "new kernel Banana Pi R1":
> 
> # Set to max performance
> echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
> echo "performance" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor

What are the results?

> Running some stress tests are ok (I did that already in the past, but
> without setting maximum performance governor).

Which stress tests have you been running?

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]