From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Qian Cai <cai@gmx.us>, Michal Hocko <mhocko@suse.com>,
Mike Rapoport <rppt@linux.vnet.ibm.com>,
Alexander Potapenko <glider@google.com>,
Dmitry Vyukov <dvyukov@google.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Sasha Levin <sashal@kernel.org>,
kasan-dev@googlegroups.com, linux-mm@kvack.org
Subject: [PATCH AUTOSEL 4.20 117/117] mm/memblock.c: skip kmemleak for kasan_init()
Date: Tue, 8 Jan 2019 14:26:25 -0500 [thread overview]
Message-ID: <20190108192628.121270-117-sashal@kernel.org> (raw)
In-Reply-To: <20190108192628.121270-1-sashal@kernel.org>
From: Qian Cai <cai@gmx.us>
[ Upstream commit fed84c78527009d4f799a3ed9a566502fa026d82 ]
Kmemleak does not play well with KASAN (tested on both HPE Apollo 70 and
Huawei TaiShan 2280 aarch64 servers).
After calling start_kernel()->setup_arch()->kasan_init(), kmemleak early
log buffer went from something like 280 to 260000 which caused kmemleak
disabled and crash dump memory reservation failed. The multitude of
kmemleak_alloc() calls is from nested loops while KASAN is setting up full
memory mappings, so let early kmemleak allocations skip those
memblock_alloc_internal() calls came from kasan_init() given that those
early KASAN memory mappings should not reference to other memory. Hence,
no kmemleak false positives.
kasan_init
kasan_map_populate [1]
kasan_pgd_populate [2]
kasan_pud_populate [3]
kasan_pmd_populate [4]
kasan_pte_populate [5]
kasan_alloc_zeroed_page
memblock_alloc_try_nid
memblock_alloc_internal
kmemleak_alloc
[1] for_each_memblock(memory, reg)
[2] while (pgdp++, addr = next, addr != end)
[3] while (pudp++, addr = next, addr != end && pud_none(READ_ONCE(*pudp)))
[4] while (pmdp++, addr = next, addr != end && pmd_none(READ_ONCE(*pmdp)))
[5] while (ptep++, addr = next, addr != end && pte_none(READ_ONCE(*ptep)))
Link: http://lkml.kernel.org/r/1543442925-17794-1-git-send-email-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/mm/kasan_init.c | 2 +-
include/linux/memblock.h | 1 +
mm/memblock.c | 19 +++++++++++--------
3 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index 63527e585aac..fcb2ca30b6f1 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -39,7 +39,7 @@ static phys_addr_t __init kasan_alloc_zeroed_page(int node)
{
void *p = memblock_alloc_try_nid(PAGE_SIZE, PAGE_SIZE,
__pa(MAX_DMA_ADDRESS),
- MEMBLOCK_ALLOC_ACCESSIBLE, node);
+ MEMBLOCK_ALLOC_KASAN, node);
return __pa(p);
}
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index aee299a6aa76..3ef3086ed52f 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -320,6 +320,7 @@ static inline int memblock_get_region_node(const struct memblock_region *r)
/* Flags for memblock allocation APIs */
#define MEMBLOCK_ALLOC_ANYWHERE (~(phys_addr_t)0)
#define MEMBLOCK_ALLOC_ACCESSIBLE 0
+#define MEMBLOCK_ALLOC_KASAN 1
/* We are using top down, so it is safe to use 0 here */
#define MEMBLOCK_LOW_LIMIT 0
diff --git a/mm/memblock.c b/mm/memblock.c
index 81ae63ca78d0..f45a049532fe 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -262,7 +262,8 @@ phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t size,
phys_addr_t kernel_end, ret;
/* pump up @end */
- if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
+ if (end == MEMBLOCK_ALLOC_ACCESSIBLE ||
+ end == MEMBLOCK_ALLOC_KASAN)
end = memblock.current_limit;
/* avoid allocating the first page */
@@ -1412,13 +1413,15 @@ static void * __init memblock_alloc_internal(
done:
ptr = phys_to_virt(alloc);
- /*
- * The min_count is set to 0 so that bootmem allocated blocks
- * are never reported as leaks. This is because many of these blocks
- * are only referred via the physical address which is not
- * looked up by kmemleak.
- */
- kmemleak_alloc(ptr, size, 0, 0);
+ /* Skip kmemleak for kasan_init() due to high volume. */
+ if (max_addr != MEMBLOCK_ALLOC_KASAN)
+ /*
+ * The min_count is set to 0 so that bootmem allocated
+ * blocks are never reported as leaks. This is because many
+ * of these blocks are only referred via the physical
+ * address which is not looked up by kmemleak.
+ */
+ kmemleak_alloc(ptr, size, 0, 0);
return ptr;
}
--
2.19.1
prev parent reply other threads:[~2019-01-08 19:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190108192628.121270-1-sashal@kernel.org>
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 113/117] mm/page-writeback.c: don't break integrity writeback on ->writepage() error Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 114/117] mm/swap: use nr_node_ids for avail_lists in swap_info_struct Sasha Levin
2019-01-08 19:26 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190108192628.121270-117-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cai@gmx.us \
--cc=dvyukov@google.com \
--cc=glider@google.com \
--cc=kasan-dev@googlegroups.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=rppt@linux.vnet.ibm.com \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox