From: Steve Capper <steve.capper@arm.com>
To: linux-mm@kvack.org, linux-arm-kernel@lists.infradead.org
Cc: catalin.marinas@arm.com, will.deacon@arm.com,
ard.biesheuvel@linaro.org, jcm@redhat.com,
Steve Capper <steve.capper@arm.com>
Subject: [PATCH V4 2/6] arm64: mm: Introduce DEFAULT_MAP_WINDOW
Date: Wed, 5 Dec 2018 16:41:41 +0000 [thread overview]
Message-ID: <20181205164145.24568-3-steve.capper@arm.com> (raw)
In-Reply-To: <20181205164145.24568-1-steve.capper@arm.com>
We wish to introduce a 52-bit virtual address space for userspace but
maintain compatibility with software that assumes the maximum VA space
size is 48 bit.
In order to achieve this, on 52-bit VA systems, we make mmap behave as
if it were running on a 48-bit VA system (unless userspace explicitly
requests a VA where addr[51:48] != 0).
On a system running a 52-bit userspace we need TASK_SIZE to represent
the 52-bit limit as it is used in various places to distinguish between
kernelspace and userspace addresses.
Thus we need a new limit for mmap, stack, ELF loader and EFI (which uses
TTBR0) to represent the non-extended VA space.
This patch introduces DEFAULT_MAP_WINDOW and DEFAULT_MAP_WINDOW_64 and
switches the appropriate logic to use that instead of TASK_SIZE.
Signed-off-by: Steve Capper <steve.capper@arm.com>
---
Changed in V3: corrections to allow COMPAT 32-bit EL0 mode to work
---
arch/arm64/include/asm/elf.h | 2 +-
arch/arm64/include/asm/processor.h | 10 ++++++++--
arch/arm64/mm/init.c | 2 +-
drivers/firmware/efi/arm-runtime.c | 2 +-
drivers/firmware/efi/libstub/arm-stub.c | 2 +-
5 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index 433b9554c6a1..bc9bd9e77d9d 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -117,7 +117,7 @@
* 64-bit, this is above 4GB to leave the entire 32-bit address
* space open for things that want to use the area for 32-bit pointers.
*/
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE_64 / 3)
+#define ELF_ET_DYN_BASE (2 * DEFAULT_MAP_WINDOW_64 / 3)
#ifndef __ASSEMBLY__
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 3e2091708b8e..50586ca6bacb 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -45,19 +45,25 @@
* TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
*/
+
+#define DEFAULT_MAP_WINDOW_64 (UL(1) << VA_BITS)
+
#ifdef CONFIG_COMPAT
#define TASK_SIZE_32 UL(0x100000000)
#define TASK_SIZE (test_thread_flag(TIF_32BIT) ? \
TASK_SIZE_32 : TASK_SIZE_64)
#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
TASK_SIZE_32 : TASK_SIZE_64)
+#define DEFAULT_MAP_WINDOW (test_thread_flag(TIF_32BIT) ? \
+ TASK_SIZE_32 : DEFAULT_MAP_WINDOW_64)
#else
#define TASK_SIZE TASK_SIZE_64
+#define DEFAULT_MAP_WINDOW DEFAULT_MAP_WINDOW_64
#endif /* CONFIG_COMPAT */
-#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 4))
+#define TASK_UNMAPPED_BASE (PAGE_ALIGN(DEFAULT_MAP_WINDOW / 4))
+#define STACK_TOP_MAX DEFAULT_MAP_WINDOW_64
-#define STACK_TOP_MAX TASK_SIZE_64
#ifdef CONFIG_COMPAT
#define AARCH32_VECTORS_BASE 0xffff0000
#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 9d9582cac6c4..7239c103be06 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -609,7 +609,7 @@ void __init mem_init(void)
* detected at build time already.
*/
#ifdef CONFIG_COMPAT
- BUILD_BUG_ON(TASK_SIZE_32 > TASK_SIZE_64);
+ BUILD_BUG_ON(TASK_SIZE_32 > DEFAULT_MAP_WINDOW_64);
#endif
#ifdef CONFIG_SPARSEMEM_VMEMMAP
diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c
index 922cfb813109..952cec5b611a 100644
--- a/drivers/firmware/efi/arm-runtime.c
+++ b/drivers/firmware/efi/arm-runtime.c
@@ -38,7 +38,7 @@ static struct ptdump_info efi_ptdump_info = {
.mm = &efi_mm,
.markers = (struct addr_marker[]){
{ 0, "UEFI runtime start" },
- { TASK_SIZE_64, "UEFI runtime end" }
+ { DEFAULT_MAP_WINDOW_64, "UEFI runtime end" }
},
.base_addr = 0,
};
diff --git a/drivers/firmware/efi/libstub/arm-stub.c b/drivers/firmware/efi/libstub/arm-stub.c
index 30ac0c975f8a..d1ec7136e3e1 100644
--- a/drivers/firmware/efi/libstub/arm-stub.c
+++ b/drivers/firmware/efi/libstub/arm-stub.c
@@ -33,7 +33,7 @@
#define EFI_RT_VIRTUAL_SIZE SZ_512M
#ifdef CONFIG_ARM64
-# define EFI_RT_VIRTUAL_LIMIT TASK_SIZE_64
+# define EFI_RT_VIRTUAL_LIMIT DEFAULT_MAP_WINDOW_64
#else
# define EFI_RT_VIRTUAL_LIMIT TASK_SIZE
#endif
--
2.19.2
next prev parent reply other threads:[~2018-12-05 16:42 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-05 16:41 [PATCH V4 0/6] 52-bit userspace VAs Steve Capper
2018-12-05 16:41 ` [PATCH V4 1/6] mm: mmap: Allow for "high" userspace addresses Steve Capper
2018-12-05 16:41 ` Steve Capper [this message]
2018-12-05 17:36 ` [PATCH V4 2/6] arm64: mm: Introduce DEFAULT_MAP_WINDOW Catalin Marinas
2018-12-06 12:24 ` Steve Capper
2018-12-05 16:41 ` [PATCH V4 3/6] arm64: mm: Define arch_get_mmap_end, arch_get_mmap_base Steve Capper
2018-12-05 16:41 ` [PATCH V4 4/6] arm64: mm: Offset TTBR1 to allow 52-bit PTRS_PER_PGD Steve Capper
2018-12-06 11:50 ` Catalin Marinas
2018-12-06 12:27 ` Steve Capper
2018-12-05 16:41 ` [PATCH V4 5/6] arm64: mm: introduce 52-bit userspace support Steve Capper
2018-12-05 18:22 ` Suzuki K Poulose
2018-12-06 12:26 ` Steve Capper
2018-12-06 14:35 ` Suzuki K Poulose
2018-12-06 14:52 ` Steve Capper
2018-12-05 16:41 ` [PATCH V4 6/6] arm64: mm: Allow forcing all userspace addresses to 52-bit Steve Capper
2018-12-06 11:51 ` Catalin Marinas
2018-12-06 12:28 ` Steve Capper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181205164145.24568-3-steve.capper@arm.com \
--to=steve.capper@arm.com \
--cc=ard.biesheuvel@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mm@kvack.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox