From: Wei Yang <richard.weiyang@gmail.com>
To: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>,
dave.hansen@intel.com, osalvador@suse.de, david@redhat.com,
akpm@linux-foundation.org, linux-mm@kvack.org
Subject: Re: [PATCH v3 2/2] mm, sparse: pass nid instead of pgdat to sparse_add_one_section()
Date: Thu, 29 Nov 2018 23:57:00 +0000 [thread overview]
Message-ID: <20181129235700.fatwngi43gjvhvya@master> (raw)
In-Reply-To: <20181129171542.GX6923@dhcp22.suse.cz>
On Thu, Nov 29, 2018 at 06:15:42PM +0100, Michal Hocko wrote:
>On Thu 29-11-18 23:53:16, Wei Yang wrote:
>> Since the information needed in sparse_add_one_section() is node id to
>> allocate proper memory, it is not necessary to pass its pgdat.
>>
>> This patch changes the prototype of sparse_add_one_section() to pass
>> node id directly. This is intended to reduce misleading that
>> sparse_add_one_section() would touch pgdat.
>>
>> Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
>
>>>From a quick look, this looks ok.
>
>Acked-by: Michal Hocko <mhocko@suse.com>
>
>Thanks for splitting up it from the original patch.
>
Thanks for your suggestion.
>> ---
>> include/linux/memory_hotplug.h | 2 +-
>> mm/memory_hotplug.c | 2 +-
>> mm/sparse.c | 6 +++---
>> 3 files changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
>> index 45a5affcab8a..3787d4e913e6 100644
>> --- a/include/linux/memory_hotplug.h
>> +++ b/include/linux/memory_hotplug.h
>> @@ -333,7 +333,7 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
>> unsigned long nr_pages, struct vmem_altmap *altmap);
>> extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages);
>> extern bool is_memblock_offlined(struct memory_block *mem);
>> -extern int sparse_add_one_section(struct pglist_data *pgdat,
>> +extern int sparse_add_one_section(int nid,
>> unsigned long start_pfn, struct vmem_altmap *altmap);
>> extern void sparse_remove_one_section(struct zone *zone, struct mem_section *ms,
>> unsigned long map_offset, struct vmem_altmap *altmap);
>> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
>> index f626e7e5f57b..5b3a3d7b4466 100644
>> --- a/mm/memory_hotplug.c
>> +++ b/mm/memory_hotplug.c
>> @@ -253,7 +253,7 @@ static int __meminit __add_section(int nid, unsigned long phys_start_pfn,
>> if (pfn_valid(phys_start_pfn))
>> return -EEXIST;
>>
>> - ret = sparse_add_one_section(NODE_DATA(nid), phys_start_pfn, altmap);
>> + ret = sparse_add_one_section(nid, phys_start_pfn, altmap);
>> if (ret < 0)
>> return ret;
>>
>> diff --git a/mm/sparse.c b/mm/sparse.c
>> index 5825f276485f..2472bf23278a 100644
>> --- a/mm/sparse.c
>> +++ b/mm/sparse.c
>> @@ -662,7 +662,7 @@ static void free_map_bootmem(struct page *memmap)
>> * set. If this is <=0, then that means that the passed-in
>> * map was not consumed and must be freed.
>> */
>> -int __meminit sparse_add_one_section(struct pglist_data *pgdat,
>> +int __meminit sparse_add_one_section(int nid,
>> unsigned long start_pfn, struct vmem_altmap *altmap)
>> {
>> unsigned long section_nr = pfn_to_section_nr(start_pfn);
>> @@ -675,11 +675,11 @@ int __meminit sparse_add_one_section(struct pglist_data *pgdat,
>> * no locking for this, because it does its own
>> * plus, it does a kmalloc
>> */
>> - ret = sparse_index_init(section_nr, pgdat->node_id);
>> + ret = sparse_index_init(section_nr, nid);
>> if (ret < 0 && ret != -EEXIST)
>> return ret;
>> ret = 0;
>> - memmap = kmalloc_section_memmap(section_nr, pgdat->node_id, altmap);
>> + memmap = kmalloc_section_memmap(section_nr, nid, altmap);
>> if (!memmap)
>> return -ENOMEM;
>> usemap = __kmalloc_section_usemap();
>> --
>> 2.15.1
>>
>
>--
>Michal Hocko
>SUSE Labs
--
Wei Yang
Help you, Help me
next prev parent reply other threads:[~2018-11-29 23:57 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-27 2:36 [PATCH] mm, sparse: drop pgdat_resize_lock in sparse_add/remove_one_section() Wei Yang
2018-11-27 6:25 ` Michal Hocko
2018-11-27 7:17 ` Dave Hansen
2018-11-27 7:30 ` Michal Hocko
2018-11-27 7:52 ` osalvador
2018-11-27 8:00 ` Michal Hocko
2018-11-27 8:18 ` osalvador
2018-11-28 0:29 ` Wei Yang
2018-11-28 8:19 ` Oscar Salvador
2018-11-28 8:41 ` Wei Yang
2018-11-28 1:01 ` Wei Yang
2018-11-28 8:47 ` Wei Yang
2018-11-28 9:17 ` Wei Yang
2018-11-28 12:34 ` Michal Hocko
2018-11-28 9:12 ` [PATCH v2] " Wei Yang
2018-11-28 10:28 ` David Hildenbrand
2018-11-29 8:54 ` Michal Hocko
2018-11-29 9:29 ` Wei Yang
2018-11-29 15:53 ` [PATCH v3 1/2] " Wei Yang
2018-11-29 15:53 ` [PATCH v3 2/2] mm, sparse: pass nid instead of pgdat to sparse_add_one_section() Wei Yang
2018-11-29 16:01 ` David Hildenbrand
2018-11-30 1:22 ` Wei Yang
2018-11-30 9:20 ` David Hildenbrand
2018-11-29 17:15 ` Michal Hocko
2018-11-29 23:57 ` Wei Yang [this message]
2018-11-29 16:06 ` [PATCH v3 1/2] mm, sparse: drop pgdat_resize_lock in sparse_add/remove_one_section() David Hildenbrand
2018-11-29 17:17 ` Michal Hocko
2018-11-30 4:28 ` Wei Yang
2018-11-30 9:19 ` David Hildenbrand
2018-11-30 9:52 ` Michal Hocko
2018-12-04 8:53 ` Wei Yang
2018-12-01 0:31 ` Wei Yang
2018-12-03 11:25 ` David Hildenbrand
2018-12-03 21:06 ` Wei Yang
2018-11-29 17:14 ` Michal Hocko
2018-12-04 8:56 ` [PATCH v4 " Wei Yang
2018-12-04 8:56 ` [PATCH v4 2/2] mm, sparse: pass nid instead of pgdat to sparse_add_one_section() Wei Yang
2018-12-04 9:24 ` [PATCH v4 1/2] mm, sparse: drop pgdat_resize_lock in sparse_add/remove_one_section() David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181129235700.fatwngi43gjvhvya@master \
--to=richard.weiyang@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=dave.hansen@intel.com \
--cc=david@redhat.com \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=osalvador@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox