* [PATCH AUTOSEL 4.9 03/17] mm/memory_hotplug: make add_memory() take the device_hotplug_lock
[not found] <20181113055223.79060-1-sashal@kernel.org>
@ 2018-11-13 5:52 ` Sasha Levin
2018-11-13 5:52 ` [PATCH AUTOSEL 4.9 15/17] mm/vmstat.c: assert that vmstat_text is in sync with stat_items_size Sasha Levin
` (2 subsequent siblings)
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2018-11-13 5:52 UTC (permalink / raw)
To: stable, linux-kernel
Cc: David Hildenbrand, Benjamin Herrenschmidt, Paul Mackerras,
Michael Ellerman, Rafael J. Wysocki, Len Brown,
Greg Kroah-Hartman, Boris Ostrovsky, Juergen Gross,
Nathan Fontenot, John Allen, Michal Hocko, Dan Williams,
Joonsoo Kim, Vlastimil Babka, Mathieu Malaterre, Pavel Tatashin,
YASUAKI ISHIMATSU, Balbir Singh, Haiyang Zhang, Heiko Carstens,
Jonathan Corbet, Kate Stewart, K. Y. Srinivasan,
Martin Schwidefsky, Michael Neuling, Philippe Ombredanne,
Stephen Hemminger, Thomas Gleixner, Andrew Morton,
Linus Torvalds, Sasha Levin, linuxppc-dev, linux-acpi, linux-mm
From: David Hildenbrand <david@redhat.com>
[ Upstream commit 8df1d0e4a265f25dc1e7e7624ccdbcb4a6630c89 ]
add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.
In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g. from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory
hot-add deadlock"). add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.
Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.
The lock is not held yet in
drivers/xen/balloon.c
arch/powerpc/platforms/powernv/memtrace.c
drivers/s390/char/sclp_cmd.c
drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.
Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module. If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).
Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../platforms/pseries/hotplug-memory.c | 2 +-
drivers/acpi/acpi_memhotplug.c | 2 +-
drivers/base/memory.c | 9 ++++++--
drivers/xen/balloon.c | 3 +++
include/linux/memory_hotplug.h | 1 +
mm/memory_hotplug.c | 22 ++++++++++++++++---
6 files changed, 32 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index c0a0947f43bb..656bbbd731d0 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -616,7 +616,7 @@ static int dlpar_add_lmb(struct of_drconf_cell *lmb)
nid = memory_add_physaddr_to_nid(lmb->base_addr);
/* Add the memory */
- rc = add_memory(nid, lmb->base_addr, block_sz);
+ rc = __add_memory(nid, lmb->base_addr, block_sz);
if (rc) {
dlpar_remove_device_tree_lmb(lmb);
dlpar_release_drc(lmb->drc_index);
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 6b0d3ef7309c..2ccfbb61ca89 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -228,7 +228,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
if (node < 0)
node = memory_add_physaddr_to_nid(info->start_addr);
- result = add_memory(node, info->start_addr, info->length);
+ result = __add_memory(node, info->start_addr, info->length);
/*
* If the memory block has been used by the kernel, add_memory()
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index c5cdd190b781..9f96f1b43c15 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -500,15 +500,20 @@ memory_probe_store(struct device *dev, struct device_attribute *attr,
if (phys_addr & ((pages_per_block << PAGE_SHIFT) - 1))
return -EINVAL;
+ ret = lock_device_hotplug_sysfs();
+ if (ret)
+ goto out;
+
nid = memory_add_physaddr_to_nid(phys_addr);
- ret = add_memory(nid, phys_addr,
- MIN_MEMORY_BLOCK_SIZE * sections_per_block);
+ ret = __add_memory(nid, phys_addr,
+ MIN_MEMORY_BLOCK_SIZE * sections_per_block);
if (ret)
goto out;
ret = count;
out:
+ unlock_device_hotplug();
return ret;
}
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index e4db19e88ab1..a10c64fee9ac 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -358,7 +358,10 @@ static enum bp_state reserve_additional_memory(void)
* callers drop the mutex before trying again.
*/
mutex_unlock(&balloon_mutex);
+ /* add_memory_resource() requires the device_hotplug lock */
+ lock_device_hotplug();
rc = add_memory_resource(nid, resource, memhp_auto_online);
+ unlock_device_hotplug();
mutex_lock(&balloon_mutex);
if (rc) {
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 134a2f69c21a..9469eef30095 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -272,6 +272,7 @@ static inline void remove_memory(int nid, u64 start, u64 size) {}
extern int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn,
void *arg, int (*func)(struct memory_block *, void *));
+extern int __add_memory(int nid, u64 start, u64 size);
extern int add_memory(int nid, u64 start, u64 size);
extern int add_memory_resource(int nid, struct resource *resource, bool online);
extern int zone_for_memory(int nid, u64 start, u64 size, int zone_default,
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 0f962cc3f1bf..1e8ba77f642d 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1339,7 +1339,12 @@ static int online_memory_block(struct memory_block *mem, void *arg)
return memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
}
-/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+/*
+ * NOTE: The caller must call lock_device_hotplug() to serialize hotplug
+ * and online/offline operations (triggered e.g. by sysfs).
+ *
+ * we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG
+ */
int __ref add_memory_resource(int nid, struct resource *res, bool online)
{
u64 start, size;
@@ -1417,9 +1422,9 @@ int __ref add_memory_resource(int nid, struct resource *res, bool online)
mem_hotplug_done();
return ret;
}
-EXPORT_SYMBOL_GPL(add_memory_resource);
-int __ref add_memory(int nid, u64 start, u64 size)
+/* requires device_hotplug_lock, see add_memory_resource() */
+int __ref __add_memory(int nid, u64 start, u64 size)
{
struct resource *res;
int ret;
@@ -1433,6 +1438,17 @@ int __ref add_memory(int nid, u64 start, u64 size)
release_memory_resource(res);
return ret;
}
+
+int add_memory(int nid, u64 start, u64 size)
+{
+ int rc;
+
+ lock_device_hotplug();
+ rc = __add_memory(nid, start, size);
+ unlock_device_hotplug();
+
+ return rc;
+}
EXPORT_SYMBOL_GPL(add_memory);
#ifdef CONFIG_MEMORY_HOTREMOVE
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 4.9 16/17] userfaultfd: allow get_mempolicy(MPOL_F_NODE|MPOL_F_ADDR) to trigger userfaults
[not found] <20181113055223.79060-1-sashal@kernel.org>
2018-11-13 5:52 ` [PATCH AUTOSEL 4.9 03/17] mm/memory_hotplug: make add_memory() take the device_hotplug_lock Sasha Levin
2018-11-13 5:52 ` [PATCH AUTOSEL 4.9 15/17] mm/vmstat.c: assert that vmstat_text is in sync with stat_items_size Sasha Levin
@ 2018-11-13 5:52 ` Sasha Levin
2018-11-13 5:52 ` [PATCH AUTOSEL 4.9 17/17] mm: don't warn about large allocations for slab Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2018-11-13 5:52 UTC (permalink / raw)
To: stable, linux-kernel
Cc: Andrea Arcangeli, Andrew Morton, Linus Torvalds, Sasha Levin, linux-mm
From: Andrea Arcangeli <aarcange@redhat.com>
[ Upstream commit 3b9aadf7278d16d7bed4d5d808501065f70898d8 ]
get_mempolicy(MPOL_F_NODE|MPOL_F_ADDR) called a get_user_pages that would
not be waiting for userfaults before failing and it would hit on a SIGBUS
instead. Using get_user_pages_locked/unlocked instead will allow
get_mempolicy to allow userfaults to resolve the fault and fill the hole,
before grabbing the node id of the page.
If the user calls get_mempolicy() with MPOL_F_ADDR | MPOL_F_NODE for an
address inside an area managed by uffd and there is no page at that
address, the page allocation from within get_mempolicy() will fail
because get_user_pages() does not allow for page fault retry required
for uffd; the user will get SIGBUS.
With this patch, the page fault will be resolved by the uffd and the
get_mempolicy() will continue normally.
Background:
Via code review, previously the syscall would have returned -EFAULT
(vm_fault_to_errno), now it will block and wait for an userfault (if
it's waken before the fault is resolved it'll still -EFAULT).
This way get_mempolicy will give a chance to an "unaware" app to be
compliant with userfaults.
The reason this visible change is that becoming "userfault compliant"
cannot regress anything: all other syscalls including read(2)/write(2)
had to become "userfault compliant" long time ago (that's one of the
things userfaultfd can do that PROT_NONE and trapping segfaults can't).
So this is just one more syscall that become "userfault compliant" like
all other major ones already were.
This has been happening on virtio-bridge dpdk process which just called
get_mempolicy on the guest space post live migration, but before the
memory had a chance to be migrated to destination.
I didn't run an strace to be able to show the -EFAULT going away, but
I've the confirmation of the below debug aid information (only visible
with CONFIG_DEBUG_VM=y) going away with the patch:
[20116.371461] FAULT_FLAG_ALLOW_RETRY missing 0
[20116.371464] CPU: 1 PID: 13381 Comm: vhost-events Not tainted 4.17.12-200.fc28.x86_64 #1
[20116.371465] Hardware name: LENOVO 20FAS2BN0A/20FAS2BN0A, BIOS N1CET54W (1.22 ) 02/10/2017
[20116.371466] Call Trace:
[20116.371473] dump_stack+0x5c/0x80
[20116.371476] handle_userfault.cold.37+0x1b/0x22
[20116.371479] ? remove_wait_queue+0x20/0x60
[20116.371481] ? poll_freewait+0x45/0xa0
[20116.371483] ? do_sys_poll+0x31c/0x520
[20116.371485] ? radix_tree_lookup_slot+0x1e/0x50
[20116.371488] shmem_getpage_gfp+0xce7/0xe50
[20116.371491] ? page_add_file_rmap+0x1a/0x2c0
[20116.371493] shmem_fault+0x78/0x1e0
[20116.371495] ? filemap_map_pages+0x3a1/0x450
[20116.371498] __do_fault+0x1f/0xc0
[20116.371500] __handle_mm_fault+0xe2e/0x12f0
[20116.371502] handle_mm_fault+0xda/0x200
[20116.371504] __get_user_pages+0x238/0x790
[20116.371506] get_user_pages+0x3e/0x50
[20116.371510] kernel_get_mempolicy+0x40b/0x700
[20116.371512] ? vfs_write+0x170/0x1a0
[20116.371515] __x64_sys_get_mempolicy+0x21/0x30
[20116.371517] do_syscall_64+0x5b/0x160
[20116.371520] entry_SYSCALL_64_after_hwframe+0x44/0xa9
The above harmless debug message (not a kernel crash, just a
dump_stack()) is shown with CONFIG_DEBUG_VM=y to more quickly identify
and improve kernel spots that may have to become "userfaultfd
compliant" like this one (without having to run an strace and search
for syscall misbehavior). Spots like the above are more closer to a
kernel bug for the non-cooperative usages that Mike focuses on, than
for for dpdk qemu-cooperative usages that reproduced it, but it's still
nicer to get this fixed for dpdk too.
The part of the patch that caused me to think is only the
implementation issue of mpol_get, but it looks like it should work safe
no matter the kind of mempolicy structure that is (the default static
policy also starts at 1 so it'll go to 2 and back to 1 without crashing
everything at 0).
[rppt@linux.vnet.ibm.com: changelog addition]
http://lkml.kernel.org/r/20180904073718.GA26916@rapoport-lnx
Link: http://lkml.kernel.org/r/20180831214848.23676-1-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/mempolicy.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 69c4a0c92ebb..625122adefe0 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -845,16 +845,19 @@ static void get_policy_nodemask(struct mempolicy *p, nodemask_t *nodes)
}
}
-static int lookup_node(unsigned long addr)
+static int lookup_node(struct mm_struct *mm, unsigned long addr)
{
struct page *p;
int err;
- err = get_user_pages(addr & PAGE_MASK, 1, 0, &p, NULL);
+ int locked = 1;
+ err = get_user_pages_locked(addr & PAGE_MASK, 1, 0, &p, &locked);
if (err >= 0) {
err = page_to_nid(p);
put_page(p);
}
+ if (locked)
+ up_read(&mm->mmap_sem);
return err;
}
@@ -865,7 +868,7 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask,
int err;
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma = NULL;
- struct mempolicy *pol = current->mempolicy;
+ struct mempolicy *pol = current->mempolicy, *pol_refcount = NULL;
if (flags &
~(unsigned long)(MPOL_F_NODE|MPOL_F_ADDR|MPOL_F_MEMS_ALLOWED))
@@ -905,7 +908,16 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask,
if (flags & MPOL_F_NODE) {
if (flags & MPOL_F_ADDR) {
- err = lookup_node(addr);
+ /*
+ * Take a refcount on the mpol, lookup_node()
+ * wil drop the mmap_sem, so after calling
+ * lookup_node() only "pol" remains valid, "vma"
+ * is stale.
+ */
+ pol_refcount = pol;
+ vma = NULL;
+ mpol_get(pol);
+ err = lookup_node(mm, addr);
if (err < 0)
goto out;
*policy = err;
@@ -940,7 +952,9 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask,
out:
mpol_cond_put(pol);
if (vma)
- up_read(¤t->mm->mmap_sem);
+ up_read(&mm->mmap_sem);
+ if (pol_refcount)
+ mpol_put(pol_refcount);
return err;
}
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 4.9 17/17] mm: don't warn about large allocations for slab
[not found] <20181113055223.79060-1-sashal@kernel.org>
` (2 preceding siblings ...)
2018-11-13 5:52 ` [PATCH AUTOSEL 4.9 16/17] userfaultfd: allow get_mempolicy(MPOL_F_NODE|MPOL_F_ADDR) to trigger userfaults Sasha Levin
@ 2018-11-13 5:52 ` Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2018-11-13 5:52 UTC (permalink / raw)
To: stable, linux-kernel
Cc: Dmitry Vyukov, Pekka Enberg, David Rientjes, Joonsoo Kim,
Andrew Morton, Linus Torvalds, Sasha Levin, linux-mm
From: Dmitry Vyukov <dvyukov@google.com>
[ Upstream commit 61448479a9f2c954cde0cfe778cb6bec5d0a748d ]
Slub does not call kmalloc_slab() for sizes > KMALLOC_MAX_CACHE_SIZE,
instead it falls back to kmalloc_large().
For slab KMALLOC_MAX_CACHE_SIZE == KMALLOC_MAX_SIZE and it calls
kmalloc_slab() for all allocations relying on NULL return value for
over-sized allocations.
This inconsistency leads to unwanted warnings from kmalloc_slab() for
over-sized allocations for slab. Returning NULL for failed allocations is
the expected behavior.
Make slub and slab code consistent by checking size >
KMALLOC_MAX_CACHE_SIZE in slab before calling kmalloc_slab().
While we are here also fix the check in kmalloc_slab(). We should check
against KMALLOC_MAX_CACHE_SIZE rather than KMALLOC_MAX_SIZE. It all kinda
worked because for slab the constants are the same, and slub always checks
the size against KMALLOC_MAX_CACHE_SIZE before kmalloc_slab(). But if we
get there with size > KMALLOC_MAX_CACHE_SIZE anyhow bad things will
happen. For example, in case of a newly introduced bug in slub code.
Also move the check in kmalloc_slab() from function entry to the size >
192 case. This partially compensates for the additional check in slab
code and makes slub code a bit faster (at least theoretically).
Also drop __GFP_NOWARN in the warning check. This warning means a bug in
slab code itself, user-passed flags have nothing to do with it.
Nothing of this affects slob.
Link: http://lkml.kernel.org/r/20180927171502.226522-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+87829a10073277282ad1@syzkaller.appspotmail.com
Reported-by: syzbot+ef4e8fc3a06e9019bb40@syzkaller.appspotmail.com
Reported-by: syzbot+6e438f4036df52cbb863@syzkaller.appspotmail.com
Reported-by: syzbot+8574471d8734457d98aa@syzkaller.appspotmail.com
Reported-by: syzbot+af1504df0807a083dbd9@syzkaller.appspotmail.com
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
mm/slab.c | 4 ++++
mm/slab_common.c | 12 ++++++------
2 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/mm/slab.c b/mm/slab.c
index c59844dbd034..263dcda6897b 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3690,6 +3690,8 @@ __do_kmalloc_node(size_t size, gfp_t flags, int node, unsigned long caller)
struct kmem_cache *cachep;
void *ret;
+ if (unlikely(size > KMALLOC_MAX_CACHE_SIZE))
+ return NULL;
cachep = kmalloc_slab(size, flags);
if (unlikely(ZERO_OR_NULL_PTR(cachep)))
return cachep;
@@ -3725,6 +3727,8 @@ static __always_inline void *__do_kmalloc(size_t size, gfp_t flags,
struct kmem_cache *cachep;
void *ret;
+ if (unlikely(size > KMALLOC_MAX_CACHE_SIZE))
+ return NULL;
cachep = kmalloc_slab(size, flags);
if (unlikely(ZERO_OR_NULL_PTR(cachep)))
return cachep;
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 622f6b6ae844..13f1926f8fcd 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -883,18 +883,18 @@ struct kmem_cache *kmalloc_slab(size_t size, gfp_t flags)
{
int index;
- if (unlikely(size > KMALLOC_MAX_SIZE)) {
- WARN_ON_ONCE(!(flags & __GFP_NOWARN));
- return NULL;
- }
-
if (size <= 192) {
if (!size)
return ZERO_SIZE_PTR;
index = size_index[size_index_elem(size)];
- } else
+ } else {
+ if (unlikely(size > KMALLOC_MAX_CACHE_SIZE)) {
+ WARN_ON(1);
+ return NULL;
+ }
index = fls(size - 1);
+ }
#ifdef CONFIG_ZONE_DMA
if (unlikely((flags & GFP_DMA)))
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread