From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
To: Ingo Molnar <mingo@redhat.com>,
x86@kernel.org, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Andy Lutomirski <luto@amacapital.net>,
Borislav Petkov <bp@suse.de>, Andi Kleen <ak@linux.intel.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Subject: [PATCH 7/9] x86/mm: Fold p4d page table layer at runtime
Date: Wed, 14 Feb 2018 21:25:40 +0300 [thread overview]
Message-ID: <20180214182542.69302-8-kirill.shutemov@linux.intel.com> (raw)
In-Reply-To: <20180214182542.69302-1-kirill.shutemov@linux.intel.com>
This patch changes page table helpers to fold p4d at runtime.
The logic is the same as in <asm-generic/pgtable-nop4d.h>.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
arch/x86/include/asm/paravirt.h | 10 ++++++----
arch/x86/include/asm/pgalloc.h | 5 ++++-
arch/x86/include/asm/pgtable.h | 11 ++++++++++-
3 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 554841fab717..70d3c86927de 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -569,14 +569,16 @@ static inline p4dval_t p4d_val(p4d_t p4d)
static inline void set_pgd(pgd_t *pgdp, pgd_t pgd)
{
- pgdval_t val = native_pgd_val(pgd);
-
- PVOP_VCALL2(pv_mmu_ops.set_pgd, pgdp, val);
+ if (pgtable_l5_enabled)
+ PVOP_VCALL2(pv_mmu_ops.set_pgd, pgdp, native_pgd_val(pgd));
+ else
+ set_p4d((p4d_t *)(pgdp), (p4d_t) { pgd.pgd });
}
static inline void pgd_clear(pgd_t *pgdp)
{
- set_pgd(pgdp, __pgd(0));
+ if (pgtable_l5_enabled)
+ set_pgd(pgdp, __pgd(0));
}
#endif /* CONFIG_PGTABLE_LEVELS == 5 */
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index aff42e1da6ee..263c142a6a6c 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -167,6 +167,8 @@ static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
#if CONFIG_PGTABLE_LEVELS > 4
static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, p4d_t *p4d)
{
+ if (!pgtable_l5_enabled)
+ return;
paravirt_alloc_p4d(mm, __pa(p4d) >> PAGE_SHIFT);
set_pgd(pgd, __pgd(_PAGE_TABLE | __pa(p4d)));
}
@@ -191,7 +193,8 @@ extern void ___p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4d);
static inline void __p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4d,
unsigned long address)
{
- ___p4d_free_tlb(tlb, p4d);
+ if (pgtable_l5_enabled)
+ ___p4d_free_tlb(tlb, p4d);
}
#endif /* CONFIG_PGTABLE_LEVELS > 4 */
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 63c2552b6b65..c8baa7f12d1b 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -65,7 +65,7 @@ extern pmdval_t early_pmd_flags;
#ifndef __PAGETABLE_P4D_FOLDED
#define set_pgd(pgdp, pgd) native_set_pgd(pgdp, pgd)
-#define pgd_clear(pgd) native_pgd_clear(pgd)
+#define pgd_clear(pgd) (pgtable_l5_enabled ? native_pgd_clear(pgd) : 0)
#endif
#ifndef set_p4d
@@ -859,6 +859,8 @@ static inline unsigned long p4d_index(unsigned long address)
#if CONFIG_PGTABLE_LEVELS > 4
static inline int pgd_present(pgd_t pgd)
{
+ if (!pgtable_l5_enabled)
+ return 1;
return pgd_flags(pgd) & _PAGE_PRESENT;
}
@@ -876,6 +878,8 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd)
/* to find an entry in a page-table-directory. */
static inline p4d_t *p4d_offset(pgd_t *pgd, unsigned long address)
{
+ if (!pgtable_l5_enabled)
+ return (p4d_t *)pgd;
return (p4d_t *)pgd_page_vaddr(*pgd) + p4d_index(address);
}
@@ -883,6 +887,9 @@ static inline int pgd_bad(pgd_t pgd)
{
unsigned long ignore_flags = _PAGE_USER;
+ if (!pgtable_l5_enabled)
+ return 0;
+
if (IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION))
ignore_flags |= _PAGE_NX;
@@ -891,6 +898,8 @@ static inline int pgd_bad(pgd_t pgd)
static inline int pgd_none(pgd_t pgd)
{
+ if (!pgtable_l5_enabled)
+ return 0;
/*
* There is no need to do a workaround for the KNL stray
* A/D bit erratum here. PGDs only point to page tables
--
2.15.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2018-02-14 18:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-14 18:25 [PATCH 0/9] x86: enable boot-time switching between paging modes Kirill A. Shutemov
2018-02-14 18:25 ` [PATCH 1/9] x86/mm: Initialize pgtable_l5_enabled at boot-time Kirill A. Shutemov
2018-02-14 18:25 ` [PATCH 2/9] x86/mm: Initialize pgdir_shift and ptrs_per_p4d " Kirill A. Shutemov
2018-02-14 18:25 ` [PATCH 3/9] x86/mm: Initialize page_offset_base " Kirill A. Shutemov
2018-02-14 18:25 ` [PATCH 4/9] x86/mm: Adjust vmalloc base and size " Kirill A. Shutemov
2018-02-14 18:25 ` [PATCH 5/9] x86/mm: Initialize vmemmap_base " Kirill A. Shutemov
2018-02-14 18:25 ` [PATCH 6/9] x86/mm: Make early boot code support boot-time switching of paging modes Kirill A. Shutemov
2018-02-14 18:25 ` Kirill A. Shutemov [this message]
2018-02-14 18:25 ` [PATCH 8/9] x86/mm: Replace compile-time checks for 5-level with runtime-time Kirill A. Shutemov
2018-02-14 18:25 ` [PATCH 9/9] x86/mm: Allow to boot without la57 if CONFIG_X86_5LEVEL=y Kirill A. Shutemov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180214182542.69302-8-kirill.shutemov@linux.intel.com \
--to=kirill.shutemov@linux.intel.com \
--cc=ak@linux.intel.com \
--cc=bp@suse.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=luto@amacapital.net \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox