From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
To: Tom Lendacky <thomas.lendacky@amd.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org, Borislav Petkov <bp@suse.de>,
Brijesh Singh <brijesh.singh@amd.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Subject: [PATCH 3/3] x86/mm/encrypt: Rewrite sme_pgtable_calc()
Date: Tue, 12 Dec 2017 14:45:44 +0300 [thread overview]
Message-ID: <20171212114544.56680-4-kirill.shutemov@linux.intel.com> (raw)
In-Reply-To: <20171212114544.56680-1-kirill.shutemov@linux.intel.com>
sme_pgtable_calc() is unnecessary complex. It can be re-written in a
more stream-lined way.
As a side effect, we would get the code ready to boot-time switching
between paging modes.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
arch/x86/mm/mem_encrypt.c | 42 ++++++++++++------------------------------
1 file changed, 12 insertions(+), 30 deletions(-)
diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
index f1f0a3fa7489..fe7fc1c6eaf7 100644
--- a/arch/x86/mm/mem_encrypt.c
+++ b/arch/x86/mm/mem_encrypt.c
@@ -561,8 +561,7 @@ static void __init sme_map_range_decrypted_wp(pgd_t *pgd,
static unsigned long __init sme_pgtable_calc(unsigned long len)
{
- unsigned long p4d_size, pud_size, pmd_size, pte_size;
- unsigned long total;
+ unsigned long entries, tables;
/*
* Perform a relatively simplistic calculation of the pagetable
@@ -572,42 +571,25 @@ static unsigned long __init sme_pgtable_calc(unsigned long len)
* mappings. Incrementing the count for each covers the case where
* the addresses cross entries.
*/
- if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
- p4d_size = (ALIGN(len, PGDIR_SIZE) / PGDIR_SIZE) + 1;
- p4d_size *= sizeof(p4d_t) * PTRS_PER_P4D;
- pud_size = (ALIGN(len, P4D_SIZE) / P4D_SIZE) + 1;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- } else {
- p4d_size = 0;
- pud_size = (ALIGN(len, PGDIR_SIZE) / PGDIR_SIZE) + 1;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- }
- pmd_size = (ALIGN(len, PUD_SIZE) / PUD_SIZE) + 1;
- pmd_size *= sizeof(pmd_t) * PTRS_PER_PMD;
- pte_size = 2 * sizeof(pte_t) * PTRS_PER_PTE;
- total = p4d_size + pud_size + pmd_size + pte_size;
+ /* PGDIR_SIZE is equal to P4D_SIZE on 4-level machine. */
+ if (PTRS_PER_P4D > 1)
+ entries = (DIV_ROUND_UP(len, PGDIR_SIZE) + 1) * sizeof(p4d_t) * PTRS_PER_P4D;
+ entries += (DIV_ROUND_UP(len, P4D_SIZE) + 1) * sizeof(pud_t) * PTRS_PER_PUD;
+ entries += (DIV_ROUND_UP(len, PUD_SIZE) + 1) * sizeof(pmd_t) * PTRS_PER_PMD;
+ entries += 2 * sizeof(pte_t) * PTRS_PER_PTE;
/*
* Now calculate the added pagetable structures needed to populate
* the new pagetables.
*/
- if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
- p4d_size = ALIGN(total, PGDIR_SIZE) / PGDIR_SIZE;
- p4d_size *= sizeof(p4d_t) * PTRS_PER_P4D;
- pud_size = ALIGN(total, P4D_SIZE) / P4D_SIZE;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- } else {
- p4d_size = 0;
- pud_size = ALIGN(total, PGDIR_SIZE) / PGDIR_SIZE;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- }
- pmd_size = ALIGN(total, PUD_SIZE) / PUD_SIZE;
- pmd_size *= sizeof(pmd_t) * PTRS_PER_PMD;
- total += p4d_size + pud_size + pmd_size;
+ if (PTRS_PER_P4D > 1)
+ tables = DIV_ROUND_UP(entries, PGDIR_SIZE) * sizeof(p4d_t) * PTRS_PER_P4D;
+ tables += DIV_ROUND_UP(entries, P4D_SIZE) * sizeof(pud_t) * PTRS_PER_PUD;
+ tables += DIV_ROUND_UP(entries, PUD_SIZE) * sizeof(pmd_t) * PTRS_PER_PMD;
- return total;
+ return entries + tables;
}
void __init sme_encrypt_kernel(struct boot_params *bp)
--
2.15.0
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-12-12 11:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-12 11:45 [PATCH 0/3] x86/mm/encrypt: Simplify pgtable helpers Kirill A. Shutemov
2017-12-12 11:45 ` [PATCH 1/3] x86/mm/encrypt: Move sme_populate_pgd*() into separate translation unit Kirill A. Shutemov
2017-12-12 11:45 ` [PATCH 2/3] x86/mm/encrypt: Rewrite sme_populate_pgd() and sme_populate_pgd_large() Kirill A. Shutemov
2017-12-12 11:45 ` Kirill A. Shutemov [this message]
2017-12-18 10:16 ` [PATCH 0/3] x86/mm/encrypt: Simplify pgtable helpers Kirill A. Shutemov
2018-01-23 17:19 [PATCHv2 0/3] x86/mm/encrypt: Cleanup and switching between paging modes Kirill A. Shutemov
2018-01-23 17:19 ` [PATCH 3/3] x86/mm/encrypt: Rewrite sme_pgtable_calc() Kirill A. Shutemov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171212114544.56680-4-kirill.shutemov@linux.intel.com \
--to=kirill.shutemov@linux.intel.com \
--cc=bp@suse.de \
--cc=brijesh.singh@amd.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox