From: Minchan Kim <minchan@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: "Huang, Ying" <ying.huang@intel.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
"Hugh Dickins" <hughd@google.com>,
"Johannes Weiner" <hannes@cmpxchg.org>,
"Tim Chen" <tim.c.chen@linux.intel.com>,
"Shaohua Li" <shli@fb.com>,
"Mel Gorman" <mgorman@techsingularity.net>,
"Jérôme Glisse" <jglisse@redhat.com>,
"Michal Hocko" <mhocko@suse.com>,
"Andrea Arcangeli" <aarcange@redhat.com>,
"David Rientjes" <rientjes@google.com>,
"Rik van Riel" <riel@redhat.com>, "Jan Kara" <jack@suse.cz>,
"Dave Jiang" <dave.jiang@intel.com>,
"Aaron Lu" <aaron.lu@intel.com>
Subject: Re: [PATCH -mm] mm, swap: Fix race between swapoff and some swap operations
Date: Fri, 8 Dec 2017 10:43:46 +0900 [thread overview]
Message-ID: <20171208014346.GA8915@bbox> (raw)
In-Reply-To: <20171207162937.6a179063a7c92ecac77e44af@linux-foundation.org>
On Thu, Dec 07, 2017 at 04:29:37PM -0800, Andrew Morton wrote:
> On Thu, 7 Dec 2017 09:14:26 +0800 "Huang, Ying" <ying.huang@intel.com> wrote:
>
> > When the swapin is performed, after getting the swap entry information
> > from the page table, the PTL (page table lock) will be released, then
> > system will go to swap in the swap entry, without any lock held to
> > prevent the swap device from being swapoff. This may cause the race
> > like below,
> >
> > CPU 1 CPU 2
> > ----- -----
> > do_swap_page
> > swapin_readahead
> > __read_swap_cache_async
> > swapoff swapcache_prepare
> > p->swap_map = NULL __swap_duplicate
> > p->swap_map[?] /* !!! NULL pointer access */
> >
> > Because swap off is usually done when system shutdown only, the race
> > may not hit many people in practice. But it is still a race need to
> > be fixed.
>
> swapoff is so rare that it's hard to get motivated about any fix which
> adds overhead to the regular codepaths.
That was my concern, too when I see this patch.
>
> Is there something we can do to ensure that all the overhead of this
> fix is placed into the swapoff side? stop_machine() may be a bit
> brutal, but a surprising amount of code uses it. Any other ideas?
How about this?
I think It's same approach with old where we uses si->lock everywhere
instead of more fine-grained cluster lock.
The reason I repeated to reset p->max to zero in the loop is to avoid
using lockdep annotation(maybe, spin_lock_nested(something) to prevent
false positive.
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 42fe5653814a..9ce007a42bbc 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2644,6 +2644,19 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
swap_file = p->swap_file;
old_block_size = p->old_block_size;
p->swap_file = NULL;
+
+ if (p->flags & SWP_SOLIDSTATE) {
+ unsigned long ci, nr_cluster;
+
+ nr_cluster = DIV_ROUND_UP(p->max, SWAPFILE_CLUSTER);
+ for (ci = 0; ci < nr_cluster; ci++) {
+ struct swap_cluster_info *sci;
+
+ sci = lock_cluster(p, ci * SWAPFILE_CLUSTER);
+ p->max = 0;
+ unlock_cluster(sci);
+ }
+ }
p->max = 0;
swap_map = p->swap_map;
p->swap_map = NULL;
@@ -3369,10 +3382,10 @@ static int __swap_duplicate(swp_entry_t entry, unsigned char usage)
goto bad_file;
p = swap_info[type];
offset = swp_offset(entry);
- if (unlikely(offset >= p->max))
- goto out;
ci = lock_cluster_or_swap_info(p, offset);
+ if (unlikely(offset >= p->max))
+ goto unlock_out;
count = p->swap_map[offset];
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-12-08 1:43 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-07 1:14 Huang, Ying
2017-12-08 0:29 ` Andrew Morton
2017-12-08 1:43 ` Minchan Kim [this message]
2017-12-08 5:41 ` Huang, Ying
2017-12-08 8:26 ` Minchan Kim
2017-12-08 8:41 ` Huang, Ying
2017-12-08 9:10 ` Minchan Kim
2017-12-08 12:32 ` Huang, Ying
2017-12-13 7:15 ` Minchan Kim
2017-12-13 8:52 ` Huang, Ying
2017-12-08 22:09 ` Andrew Morton
2017-12-11 5:30 ` Huang, Ying
2017-12-11 17:04 ` Paul E. McKenney
2017-12-12 1:12 ` Huang, Ying
2017-12-12 17:11 ` Paul E. McKenney
2017-12-13 2:17 ` Huang, Ying
2017-12-13 3:27 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171208014346.GA8915@bbox \
--to=minchan@kernel.org \
--cc=aarcange@redhat.com \
--cc=aaron.lu@intel.com \
--cc=akpm@linux-foundation.org \
--cc=dave.jiang@intel.com \
--cc=hannes@cmpxchg.org \
--cc=hughd@google.com \
--cc=jack@suse.cz \
--cc=jglisse@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@techsingularity.net \
--cc=mhocko@suse.com \
--cc=riel@redhat.com \
--cc=rientjes@google.com \
--cc=shli@fb.com \
--cc=tim.c.chen@linux.intel.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox