From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
To: Tom Lendacky <thomas.lendacky@amd.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>,
x86@kernel.org, Borislav Petkov <bp@suse.de>,
Brijesh Singh <brijesh.singh@amd.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] x86/mm: Rewrite sme_populate_pgd() in a more sensible way
Date: Mon, 4 Dec 2017 20:39:31 +0300 [thread overview]
Message-ID: <20171204173931.pjnmfdutys7cnesx@black.fi.intel.com> (raw)
In-Reply-To: <20171204163445.qt5dqcrrkilnhowz@black.fi.intel.com>
On Mon, Dec 04, 2017 at 04:34:45PM +0000, Kirill A. Shutemov wrote:
> On Mon, Dec 04, 2017 at 04:00:26PM +0000, Tom Lendacky wrote:
> > On 12/4/2017 8:57 AM, Kirill A. Shutemov wrote:
> > > On Mon, Dec 04, 2017 at 08:19:11AM -0600, Tom Lendacky wrote:
> > > > On 12/4/2017 5:23 AM, Kirill A. Shutemov wrote:
> > > > > sme_populate_pgd() open-codes a lot of things that are not needed to be
> > > > > open-coded.
> > > > >
> > > > > Let's rewrite it in a more stream-lined way.
> > > > >
> > > > > This would also buy us boot-time switching between support between
> > > > > paging modes, when rest of the pieces will be upstream.
> > > >
> > > > Hi Kirill,
> > > >
> > > > Unfortunately, some of these can't be changed. The use of p4d_offset(),
> > > > pud_offset(), etc., use non-identity mapped virtual addresses which cause
> > > > failures at this point of the boot process.
> > >
> > > Wat? Virtual address is virtual address. p?d_offset() doesn't care about
> > > what mapping you're using.
> >
> > Yes it does. For example, pmd_offset() issues a pud_page_addr() call,
> > which does a __va() returning a non-identity mapped address (0xffff88...).
> > Only identity mapped virtual addresses have been setup at this point, so
> > the use of that virtual address panics the kernel.
>
> Stupid me. You are right.
>
> What about something like this:
sme_pgtable_calc() also looks unnecessary complex.
Any objections on this:
diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
index 65e0d68f863f..59b7d7ba9b37 100644
--- a/arch/x86/mm/mem_encrypt.c
+++ b/arch/x86/mm/mem_encrypt.c
@@ -548,8 +548,7 @@ static void __init *sme_populate_pgd(pgd_t *pgd_base, void *pgtable_area,
static unsigned long __init sme_pgtable_calc(unsigned long len)
{
- unsigned long p4d_size, pud_size, pmd_size;
- unsigned long total;
+ unsigned long entries, tables;
/*
* Perform a relatively simplistic calculation of the pagetable
@@ -559,41 +558,25 @@ static unsigned long __init sme_pgtable_calc(unsigned long len)
* mappings. Incrementing the count for each covers the case where
* the addresses cross entries.
*/
- if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
- p4d_size = (ALIGN(len, PGDIR_SIZE) / PGDIR_SIZE) + 1;
- p4d_size *= sizeof(p4d_t) * PTRS_PER_P4D;
- pud_size = (ALIGN(len, P4D_SIZE) / P4D_SIZE) + 1;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- } else {
- p4d_size = 0;
- pud_size = (ALIGN(len, PGDIR_SIZE) / PGDIR_SIZE) + 1;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- }
- pmd_size = (ALIGN(len, PUD_SIZE) / PUD_SIZE) + 1;
- pmd_size *= sizeof(pmd_t) * PTRS_PER_PMD;
- total = p4d_size + pud_size + pmd_size;
+ entries = (DIV_ROUND_UP(len, PGDIR_SIZE) + 1) * PAGE_SIZE;
+ if (PTRS_PER_P4D > 1)
+ entries += (DIV_ROUND_UP(len, P4D_SIZE) + 1) * PAGE_SIZE;
+ entries += (DIV_ROUND_UP(len, PUD_SIZE) + 1) * PAGE_SIZE;
+ entries += (DIV_ROUND_UP(len, PMD_SIZE) + 1) * PAGE_SIZE;
/*
* Now calculate the added pagetable structures needed to populate
* the new pagetables.
*/
- if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
- p4d_size = ALIGN(total, PGDIR_SIZE) / PGDIR_SIZE;
- p4d_size *= sizeof(p4d_t) * PTRS_PER_P4D;
- pud_size = ALIGN(total, P4D_SIZE) / P4D_SIZE;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- } else {
- p4d_size = 0;
- pud_size = ALIGN(total, PGDIR_SIZE) / PGDIR_SIZE;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- }
- pmd_size = ALIGN(total, PUD_SIZE) / PUD_SIZE;
- pmd_size *= sizeof(pmd_t) * PTRS_PER_PMD;
- total += p4d_size + pud_size + pmd_size;
+ tables = DIV_ROUND_UP(entries, PGDIR_SIZE) * PAGE_SIZE;
+ if (PTRS_PER_P4D > 1)
+ tables += DIV_ROUND_UP(entries, P4D_SIZE) * PAGE_SIZE;
+ tables += DIV_ROUND_UP(entries, PUD_SIZE) * PAGE_SIZE;
+ tables += DIV_ROUND_UP(entries, PMD_SIZE) * PAGE_SIZE;
- return total;
+ return entries + tables;
}
void __init sme_encrypt_kernel(void)
--
Kirill A. Shutemov
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-12-04 17:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-04 11:23 Kirill A. Shutemov
2017-12-04 14:19 ` Tom Lendacky
2017-12-04 14:57 ` Kirill A. Shutemov
2017-12-04 16:00 ` Tom Lendacky
2017-12-04 16:34 ` Kirill A. Shutemov
2017-12-04 17:39 ` Kirill A. Shutemov [this message]
2017-12-04 17:50 ` Kirill A. Shutemov
2017-12-08 14:37 ` Tom Lendacky
2017-12-12 11:39 ` Kirill A. Shutemov
2017-12-04 18:33 ` Tom Lendacky
2017-12-04 18:50 ` Kirill A. Shutemov
2017-12-08 14:43 ` Tom Lendacky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171204173931.pjnmfdutys7cnesx@black.fi.intel.com \
--to=kirill.shutemov@linux.intel.com \
--cc=bp@suse.de \
--cc=brijesh.singh@amd.com \
--cc=hpa@zytor.com \
--cc=kirill@shutemov.name \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox