From: Michal Hocko <mhocko@kernel.org>
To: "Huang, Ying" <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Huang Ying <huang.ying.caritas@gmail.com>,
Tim Chen <tim.c.chen@linux.intel.com>,
Minchan Kim <minchan@kernel.org>,
stable@vger.kernel.org, Christian Kujau <lists@nerdbynature.de>
Subject: Re: [PATCH -mm -V2] mm, swap: Fix false error message in __swp_swapcount()
Date: Fri, 27 Oct 2017 10:28:04 +0200 [thread overview]
Message-ID: <20171027082804.ptjqg2gyjfwpaeyv@dhcp22.suse.cz> (raw)
In-Reply-To: <20171027055327.5428-1-ying.huang@intel.com>
On Fri 27-10-17 13:53:27, Huang, Ying wrote:
> From: Huang Ying <huang.ying.caritas@gmail.com>
>
> When a page fault occurs for a swap entry, the physical swap readahead
> (not the VMA base swap readahead) may readahead several swap entries
> after the fault swap entry. The readahead algorithm calculates some
> of the swap entries to readahead via increasing the offset of the
> fault swap entry without checking whether they are beyond the end of
> the swap device and it relys on the __swp_swapcount() and
> swapcache_prepare() to check it. Although __swp_swapcount() checks
> for the swap entry passed in, it will complain with the error message
> as follow for the expected invalid swap entry. This may make the end
> users confused.
>
> swap_info_get: Bad swap offset entry 0200f8a7
>
> To fix the false error message, the swap entry checking is added in
> swap readahead to avoid to pass the out-bound swap entries and the
> swap entry reserved for the swap header to __swp_swapcount() and
> swapcache_prepare().
I have lost an overview in the swap code after recent changes so I
cannot really give you a responsible ack but this looks much better
than the previous attempt. So it looks good at first sight.
> Cc: Tim Chen <tim.c.chen@linux.intel.com>
> Cc: Minchan Kim <minchan@kernel.org>
> Cc: Michal Hocko <mhocko@suse.com>
> Cc: <stable@vger.kernel.org> # 4.11-4.13
> Reported-by: Christian Kujau <lists@nerdbynature.de>
> Fixes: e8c26ab60598 ("mm/swap: skip readahead for unreferenced swap slots")
> Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
> ---
> include/linux/swap.h | 1 +
> mm/swap_state.c | 6 ++++--
> mm/swapfile.c | 21 +++++++++++++++++++++
> 3 files changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/swap.h b/include/linux/swap.h
> index 84255b3da7c1..43b4b821c805 100644
> --- a/include/linux/swap.h
> +++ b/include/linux/swap.h
> @@ -476,6 +476,7 @@ extern int page_swapcount(struct page *);
> extern int __swap_count(struct swap_info_struct *si, swp_entry_t entry);
> extern int __swp_swapcount(swp_entry_t entry);
> extern int swp_swapcount(swp_entry_t entry);
> +extern bool swap_entry_check(swp_entry_t entry);
> extern struct swap_info_struct *page_swap_info(struct page *);
> extern struct swap_info_struct *swp_swap_info(swp_entry_t entry);
> extern bool reuse_swap_page(struct page *, int *);
> diff --git a/mm/swap_state.c b/mm/swap_state.c
> index 6c017ced11e6..7dd70e77058d 100644
> --- a/mm/swap_state.c
> +++ b/mm/swap_state.c
> @@ -569,11 +569,13 @@ struct page *swapin_readahead(swp_entry_t entry, gfp_t gfp_mask,
> /* Read a page_cluster sized and aligned cluster around offset. */
> start_offset = offset & ~mask;
> end_offset = offset | mask;
> - if (!start_offset) /* First page is swap header. */
> - start_offset++;
>
> blk_start_plug(&plug);
> for (offset = start_offset; offset <= end_offset ; offset++) {
> + swp_entry_t ent = swp_entry(swp_type(entry), offset);
> +
> + if (!swap_entry_check(ent))
> + continue;
> /* Ok, do the async read-ahead now */
> page = __read_swap_cache_async(
> swp_entry(swp_type(entry), offset),
> diff --git a/mm/swapfile.c b/mm/swapfile.c
> index 3074b02eaa09..b04cec29c234 100644
> --- a/mm/swapfile.c
> +++ b/mm/swapfile.c
> @@ -1107,6 +1107,27 @@ static struct swap_info_struct *swap_info_get_cont(swp_entry_t entry,
> return p;
> }
>
> +bool swap_entry_check(swp_entry_t entry)
> +{
> + struct swap_info_struct *p;
> + unsigned long offset, type;
> +
> + type = swp_type(entry);
> + if (type >= nr_swapfiles)
> + goto bad_file;
> + p = swap_info[type];
> + offset = swp_offset(entry);
> + if (unlikely(!offset || offset >= p->max))
> + goto out;
> +
> + return true;
> +
> +bad_file:
> + pr_err("%s: %s%08lx\n", __func__, Bad_file, entry.val);
> +out:
> + return false;
> +}
> +
> static unsigned char __swap_entry_free(struct swap_info_struct *p,
> swp_entry_t entry, unsigned char usage)
> {
> --
> 2.14.2
>
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-10-27 8:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-27 5:53 Huang, Ying
2017-10-27 8:28 ` Michal Hocko [this message]
2017-10-29 23:57 ` Minchan Kim
2017-10-30 8:02 ` Michal Hocko
2017-10-31 2:17 ` Minchan Kim
2017-10-31 7:31 ` Michal Hocko
2017-10-31 7:37 ` Minchan Kim
2017-10-31 7:46 ` Michal Hocko
2017-10-31 5:32 ` Huang, Ying
2017-10-31 5:43 ` Minchan Kim
2017-10-31 5:46 ` Huang, Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171027082804.ptjqg2gyjfwpaeyv@dhcp22.suse.cz \
--to=mhocko@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=huang.ying.caritas@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lists@nerdbynature.de \
--cc=minchan@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tim.c.chen@linux.intel.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox