From: Ross Zwisler <ross.zwisler@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>,
Theodore Ts'o <tytso@mit.edu>,
Alexander Viro <viro@zeniv.linux.org.uk>,
Andreas Dilger <adilger.kernel@dilger.ca>,
Andrew Morton <akpm@linux-foundation.org>,
Christoph Hellwig <hch@lst.de>,
Dan Williams <dan.j.williams@intel.com>,
Dave Chinner <david@fromorbit.com>, Jan Kara <jack@suse.cz>,
Matthew Wilcox <mawilcox@microsoft.com>,
linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org,
linux-mm@kvack.org, linux-nvdimm@lists.01.org,
linux-xfs@vger.kernel.org
Subject: [PATCH v6 12/17] dax: dax_iomap_fault() needs to call iomap_end()
Date: Wed, 12 Oct 2016 16:50:17 -0600 [thread overview]
Message-ID: <20161012225022.15507-13-ross.zwisler@linux.intel.com> (raw)
In-Reply-To: <20161012225022.15507-1-ross.zwisler@linux.intel.com>
Currently iomap_end() doesn't do anything for DAX page faults for both ext2
and XFS. ext2_iomap_end() just checks for a write underrun, and
xfs_file_iomap_end() checks to see if it needs to finish a delayed
allocation. However, in the future iomap_end() calls might be needed to
make sure we have balanced allocations, locks, etc. So, add calls to
iomap_end() with appropriate error handling to dax_iomap_fault().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
---
fs/dax.c | 37 +++++++++++++++++++++++++++++--------
1 file changed, 29 insertions(+), 8 deletions(-)
diff --git a/fs/dax.c b/fs/dax.c
index 7737954..6edd89b 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -1165,6 +1165,7 @@ int dax_iomap_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
struct iomap iomap = { 0 };
unsigned flags = 0;
int error, major = 0;
+ int locked_status = 0;
void *entry;
/*
@@ -1194,7 +1195,7 @@ int dax_iomap_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
goto unlock_entry;
if (WARN_ON_ONCE(iomap.offset + iomap.length < pos + PAGE_SIZE)) {
error = -EIO; /* fs corruption? */
- goto unlock_entry;
+ goto finish_iomap;
}
sector = dax_iomap_sector(&iomap, pos);
@@ -1216,13 +1217,15 @@ int dax_iomap_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
}
if (error)
- goto unlock_entry;
+ goto finish_iomap;
if (!radix_tree_exceptional_entry(entry)) {
vmf->page = entry;
- return VM_FAULT_LOCKED;
+ locked_status = VM_FAULT_LOCKED;
+ } else {
+ vmf->entry = entry;
+ locked_status = VM_FAULT_DAX_LOCKED;
}
- vmf->entry = entry;
- return VM_FAULT_DAX_LOCKED;
+ goto finish_iomap;
}
switch (iomap.type) {
@@ -1237,8 +1240,10 @@ int dax_iomap_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
break;
case IOMAP_UNWRITTEN:
case IOMAP_HOLE:
- if (!(vmf->flags & FAULT_FLAG_WRITE))
- return dax_load_hole(mapping, entry, vmf);
+ if (!(vmf->flags & FAULT_FLAG_WRITE)) {
+ locked_status = dax_load_hole(mapping, entry, vmf);
+ break;
+ }
/*FALLTHRU*/
default:
WARN_ON_ONCE(1);
@@ -1246,14 +1251,30 @@ int dax_iomap_fault(struct vm_area_struct *vma, struct vm_fault *vmf,
break;
}
+ finish_iomap:
+ if (ops->iomap_end) {
+ if (error) {
+ /* keep previous error */
+ ops->iomap_end(inode, pos, PAGE_SIZE, 0, flags,
+ &iomap);
+ } else {
+ error = ops->iomap_end(inode, pos, PAGE_SIZE,
+ PAGE_SIZE, flags, &iomap);
+ }
+ }
unlock_entry:
- put_locked_mapping_entry(mapping, vmf->pgoff, entry);
+ if (!locked_status || error)
+ put_locked_mapping_entry(mapping, vmf->pgoff, entry);
out:
if (error == -ENOMEM)
return VM_FAULT_OOM | major;
/* -EBUSY is fine, somebody else faulted on the same PTE */
if (error < 0 && error != -EBUSY)
return VM_FAULT_SIGBUS | major;
+ if (locked_status) {
+ WARN_ON_ONCE(error); /* -EBUSY from ops->iomap_end? */
+ return locked_status;
+ }
return VM_FAULT_NOPAGE | major;
}
EXPORT_SYMBOL_GPL(dax_iomap_fault);
--
2.9.0
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2016-10-12 22:50 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-12 22:50 [PATCH v6 00/17] re-enable DAX PMD support Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 01/17] ext4: allow DAX writeback for hole punch Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 02/17] ext4: tell DAX the size of allocation holes Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 03/17] dax: remove buffer_size_valid() Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 04/17] ext2: remove support for DAX PMD faults Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 05/17] dax: make 'wait_table' global variable static Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 06/17] dax: remove the last BUG_ON() from fs/dax.c Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 07/17] dax: consistent variable naming for DAX entries Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 08/17] dax: coordinate locking for offsets in PMD range Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 09/17] dax: remove dax_pmd_fault() Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 10/17] dax: correct dax iomap code namespace Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 11/17] dax: add dax_iomap_sector() helper function Ross Zwisler
2016-10-12 22:50 ` Ross Zwisler [this message]
2016-10-12 22:50 ` [PATCH v6 13/17] dax: move RADIX_DAX_* defines to dax.h Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 14/17] dax: move put_(un)locked_mapping_entry() in dax.c Ross Zwisler
2016-10-13 15:11 ` Jan Kara
2016-10-12 22:50 ` [PATCH v6 15/17] dax: add struct iomap based DAX PMD support Ross Zwisler
2016-10-13 15:42 ` Jan Kara
2016-10-13 19:23 ` [PATCH v7 " Ross Zwisler
2016-10-17 6:06 ` Aneesh Kumar K.V
2016-10-17 14:55 ` Ross Zwisler
2016-10-13 19:25 ` [PATCH v6 " Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 16/17] xfs: use struct iomap based DAX PMD fault path Ross Zwisler
2016-10-12 22:50 ` [PATCH v6 17/17] dax: remove "depends on BROKEN" from FS_DAX_PMD Ross Zwisler
2016-10-13 15:42 ` Jan Kara
2016-10-17 5:57 ` Aneesh Kumar K.V
2016-10-17 9:09 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161012225022.15507-13-ross.zwisler@linux.intel.com \
--to=ross.zwisler@linux.intel.com \
--cc=adilger.kernel@dilger.ca \
--cc=akpm@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=david@fromorbit.com \
--cc=hch@lst.de \
--cc=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nvdimm@lists.01.org \
--cc=linux-xfs@vger.kernel.org \
--cc=mawilcox@microsoft.com \
--cc=tytso@mit.edu \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox