From: Peter Zijlstra <peterz@infradead.org>
To: Greg KH <greg@kroah.com>
Cc: Campbell Steven <casteven@gmail.com>,
Stefan Priebe - Profihost AG <s.priebe@profihost.ag>,
Vlastimil Babka <vbabka@suse.cz>,
LKML <linux-kernel@vger.kernel.org>,
"linux-mm@kvack.org" <linux-mm@kvack.org>,
linux-mm@vger.kernel.org, Ingo Molnar <mingo@redhat.com>,
Rik van Riel <riel@redhat.com>
Subject: Re: divide error: 0000 [#1] SMP in task_numa_migrate - handle_mm_fault vanilla 4.4.6
Date: Tue, 12 Jul 2016 15:12:35 +0200 [thread overview]
Message-ID: <20160712131235.GO30154@twins.programming.kicks-ass.net> (raw)
In-Reply-To: <20160711223353.GA8959@kroah.com>
[-- Attachment #1: Type: text/plain, Size: 454 bytes --]
On Mon, Jul 11, 2016 at 03:33:53PM -0700, Greg KH wrote:
> Oops, this commit does not apply cleanly to 4.6 or 4.4-stable trees.
> Can someone send me the backported verision that they have tested to
> work properly so I can queue it up?
I've never actually been able to reproduce, but the attached patches
apply, the reject was trivial.
They seem to compile and boot on my main test rig, but nothing else was
done but build the next kernel with it.
[-- Attachment #2: sched-stable-4.4.patch --]
[-- Type: text/x-diff, Size: 5885 bytes --]
commit 8974189222159154c55f24ddad33e3613960521a
Author: Peter Zijlstra <peterz@infradead.org>
Date: Thu Jun 16 10:50:40 2016 +0200
sched/fair: Fix cfs_rq avg tracking underflow
As per commit:
b7fa30c9cc48 ("sched/fair: Fix post_init_entity_util_avg() serialization")
> the code generated from update_cfs_rq_load_avg():
>
> if (atomic_long_read(&cfs_rq->removed_load_avg)) {
> s64 r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0);
> sa->load_avg = max_t(long, sa->load_avg - r, 0);
> sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0);
> removed_load = 1;
> }
>
> turns into:
>
> ffffffff81087064: 49 8b 85 98 00 00 00 mov 0x98(%r13),%rax
> ffffffff8108706b: 48 85 c0 test %rax,%rax
> ffffffff8108706e: 74 40 je ffffffff810870b0 <update_blocked_averages+0xc0>
> ffffffff81087070: 4c 89 f8 mov %r15,%rax
> ffffffff81087073: 49 87 85 98 00 00 00 xchg %rax,0x98(%r13)
> ffffffff8108707a: 49 29 45 70 sub %rax,0x70(%r13)
> ffffffff8108707e: 4c 89 f9 mov %r15,%rcx
> ffffffff81087081: bb 01 00 00 00 mov $0x1,%ebx
> ffffffff81087086: 49 83 7d 70 00 cmpq $0x0,0x70(%r13)
> ffffffff8108708b: 49 0f 49 4d 70 cmovns 0x70(%r13),%rcx
>
> Which you'll note ends up with sa->load_avg -= r in memory at
> ffffffff8108707a.
So I _should_ have looked at other unserialized users of ->load_avg,
but alas. Luckily nikbor reported a similar /0 from task_h_load() which
instantly triggered recollection of this here problem.
Aside from the intermediate value hitting memory and causing problems,
there's another problem: the underflow detection relies on the signed
bit. This reduces the effective width of the variables, IOW its
effectively the same as having these variables be of signed type.
This patch changes to a different means of unsigned underflow
detection to not rely on the signed bit. This allows the variables to
use the 'full' unsigned range. And it does so with explicit LOAD -
STORE to ensure any intermediate value will never be visible in
memory, allowing these unserialized loads.
Note: GCC generates crap code for this, might warrant a look later.
Note2: I say 'full' above, if we end up at U*_MAX we'll still explode;
maybe we should do clamping on add too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yuyang Du <yuyang.du@intel.com>
Cc: bsegall@google.com
Cc: kernel@kyup.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: steve.muckle@linaro.org
Fixes: 9d89c257dfb9 ("sched/fair: Rewrite runnable load and utilization average tracking")
Link: http://lkml.kernel.org/r/20160617091948.GJ30927@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
kernel/sched/fair.c | 33 +++++++++++++++++++++++++--------
1 file changed, 25 insertions(+), 8 deletions(-)
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -2682,6 +2682,23 @@ static inline void update_tg_load_avg(st
static inline u64 cfs_rq_clock_task(struct cfs_rq *cfs_rq);
+/*
+ * Unsigned subtract and clamp on underflow.
+ *
+ * Explicitly do a load-store to ensure the intermediate value never hits
+ * memory. This allows lockless observations without ever seeing the negative
+ * values.
+ */
+#define sub_positive(_ptr, _val) do { \
+ typeof(_ptr) ptr = (_ptr); \
+ typeof(*ptr) val = (_val); \
+ typeof(*ptr) res, var = READ_ONCE(*ptr); \
+ res = var - val; \
+ if (res > var) \
+ res = 0; \
+ WRITE_ONCE(*ptr, res); \
+} while (0)
+
/* Group cfs_rq's load_avg is used for task_h_load and update_cfs_share */
static inline int update_cfs_rq_load_avg(u64 now, struct cfs_rq *cfs_rq)
{
@@ -2690,15 +2707,15 @@ static inline int update_cfs_rq_load_avg
if (atomic_long_read(&cfs_rq->removed_load_avg)) {
s64 r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0);
- sa->load_avg = max_t(long, sa->load_avg - r, 0);
- sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0);
+ sub_positive(&sa->load_avg, r);
+ sub_positive(&sa->load_sum, r * LOAD_AVG_MAX);
removed = 1;
}
if (atomic_long_read(&cfs_rq->removed_util_avg)) {
long r = atomic_long_xchg(&cfs_rq->removed_util_avg, 0);
- sa->util_avg = max_t(long, sa->util_avg - r, 0);
- sa->util_sum = max_t(s32, sa->util_sum - r * LOAD_AVG_MAX, 0);
+ sub_positive(&sa->util_avg, r);
+ sub_positive(&sa->util_sum, r * LOAD_AVG_MAX);
}
decayed = __update_load_avg(now, cpu_of(rq_of(cfs_rq)), sa,
@@ -2764,10 +2781,10 @@ static void detach_entity_load_avg(struc
&se->avg, se->on_rq * scale_load_down(se->load.weight),
cfs_rq->curr == se, NULL);
- cfs_rq->avg.load_avg = max_t(long, cfs_rq->avg.load_avg - se->avg.load_avg, 0);
- cfs_rq->avg.load_sum = max_t(s64, cfs_rq->avg.load_sum - se->avg.load_sum, 0);
- cfs_rq->avg.util_avg = max_t(long, cfs_rq->avg.util_avg - se->avg.util_avg, 0);
- cfs_rq->avg.util_sum = max_t(s32, cfs_rq->avg.util_sum - se->avg.util_sum, 0);
+ sub_positive(&cfs_rq->avg.load_avg, se->avg.load_avg);
+ sub_positive(&cfs_rq->avg.load_sum, se->avg.load_sum);
+ sub_positive(&cfs_rq->avg.util_avg, se->avg.util_avg);
+ sub_positive(&cfs_rq->avg.util_sum, se->avg.util_sum);
}
/* Add the load generated by se into cfs_rq's load average */
[-- Attachment #3: sched-stable-4.6.patch --]
[-- Type: text/x-diff, Size: 5732 bytes --]
commit 8974189222159154c55f24ddad33e3613960521a
Author: Peter Zijlstra <peterz@infradead.org>
Date: Thu Jun 16 10:50:40 2016 +0200
sched/fair: Fix cfs_rq avg tracking underflow
As per commit:
b7fa30c9cc48 ("sched/fair: Fix post_init_entity_util_avg() serialization")
> the code generated from update_cfs_rq_load_avg():
>
> if (atomic_long_read(&cfs_rq->removed_load_avg)) {
> s64 r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0);
> sa->load_avg = max_t(long, sa->load_avg - r, 0);
> sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0);
> removed_load = 1;
> }
>
> turns into:
>
> ffffffff81087064: 49 8b 85 98 00 00 00 mov 0x98(%r13),%rax
> ffffffff8108706b: 48 85 c0 test %rax,%rax
> ffffffff8108706e: 74 40 je ffffffff810870b0 <update_blocked_averages+0xc0>
> ffffffff81087070: 4c 89 f8 mov %r15,%rax
> ffffffff81087073: 49 87 85 98 00 00 00 xchg %rax,0x98(%r13)
> ffffffff8108707a: 49 29 45 70 sub %rax,0x70(%r13)
> ffffffff8108707e: 4c 89 f9 mov %r15,%rcx
> ffffffff81087081: bb 01 00 00 00 mov $0x1,%ebx
> ffffffff81087086: 49 83 7d 70 00 cmpq $0x0,0x70(%r13)
> ffffffff8108708b: 49 0f 49 4d 70 cmovns 0x70(%r13),%rcx
>
> Which you'll note ends up with sa->load_avg -= r in memory at
> ffffffff8108707a.
So I _should_ have looked at other unserialized users of ->load_avg,
but alas. Luckily nikbor reported a similar /0 from task_h_load() which
instantly triggered recollection of this here problem.
Aside from the intermediate value hitting memory and causing problems,
there's another problem: the underflow detection relies on the signed
bit. This reduces the effective width of the variables, IOW its
effectively the same as having these variables be of signed type.
This patch changes to a different means of unsigned underflow
detection to not rely on the signed bit. This allows the variables to
use the 'full' unsigned range. And it does so with explicit LOAD -
STORE to ensure any intermediate value will never be visible in
memory, allowing these unserialized loads.
Note: GCC generates crap code for this, might warrant a look later.
Note2: I say 'full' above, if we end up at U*_MAX we'll still explode;
maybe we should do clamping on add too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yuyang Du <yuyang.du@intel.com>
Cc: bsegall@google.com
Cc: kernel@kyup.com
Cc: morten.rasmussen@arm.com
Cc: pjt@google.com
Cc: steve.muckle@linaro.org
Fixes: 9d89c257dfb9 ("sched/fair: Rewrite runnable load and utilization average tracking")
Link: http://lkml.kernel.org/r/20160617091948.GJ30927@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -2821,6 +2821,23 @@ static inline void update_tg_load_avg(st
static inline u64 cfs_rq_clock_task(struct cfs_rq *cfs_rq);
+/*
+ * Unsigned subtract and clamp on underflow.
+ *
+ * Explicitly do a load-store to ensure the intermediate value never hits
+ * memory. This allows lockless observations without ever seeing the negative
+ * values.
+ */
+#define sub_positive(_ptr, _val) do { \
+ typeof(_ptr) ptr = (_ptr); \
+ typeof(*ptr) val = (_val); \
+ typeof(*ptr) res, var = READ_ONCE(*ptr); \
+ res = var - val; \
+ if (res > var) \
+ res = 0; \
+ WRITE_ONCE(*ptr, res); \
+} while (0)
+
/* Group cfs_rq's load_avg is used for task_h_load and update_cfs_share */
static inline int update_cfs_rq_load_avg(u64 now, struct cfs_rq *cfs_rq)
{
@@ -2829,15 +2846,15 @@ static inline int update_cfs_rq_load_avg
if (atomic_long_read(&cfs_rq->removed_load_avg)) {
s64 r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0);
- sa->load_avg = max_t(long, sa->load_avg - r, 0);
- sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0);
+ sub_positive(&sa->load_avg, r);
+ sub_positive(&sa->load_sum, r * LOAD_AVG_MAX);
removed = 1;
}
if (atomic_long_read(&cfs_rq->removed_util_avg)) {
long r = atomic_long_xchg(&cfs_rq->removed_util_avg, 0);
- sa->util_avg = max_t(long, sa->util_avg - r, 0);
- sa->util_sum = max_t(s32, sa->util_sum - r * LOAD_AVG_MAX, 0);
+ sub_positive(&sa->util_avg, r);
+ sub_positive(&sa->util_sum, r * LOAD_AVG_MAX);
}
decayed = __update_load_avg(now, cpu_of(rq_of(cfs_rq)), sa,
@@ -2927,10 +2944,10 @@ static void detach_entity_load_avg(struc
&se->avg, se->on_rq * scale_load_down(se->load.weight),
cfs_rq->curr == se, NULL);
- cfs_rq->avg.load_avg = max_t(long, cfs_rq->avg.load_avg - se->avg.load_avg, 0);
- cfs_rq->avg.load_sum = max_t(s64, cfs_rq->avg.load_sum - se->avg.load_sum, 0);
- cfs_rq->avg.util_avg = max_t(long, cfs_rq->avg.util_avg - se->avg.util_avg, 0);
- cfs_rq->avg.util_sum = max_t(s32, cfs_rq->avg.util_sum - se->avg.util_sum, 0);
+ sub_positive(&cfs_rq->avg.load_avg, se->avg.load_avg);
+ sub_positive(&cfs_rq->avg.load_sum, se->avg.load_sum);
+ sub_positive(&cfs_rq->avg.util_avg, se->avg.util_avg);
+ sub_positive(&cfs_rq->avg.util_sum, se->avg.util_sum);
}
/* Add the load generated by se into cfs_rq's load average */
next prev parent reply other threads:[~2016-07-12 13:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-17 18:38 Stefan Priebe
2016-03-17 18:45 ` Greg KH
2016-03-19 22:26 ` Vlastimil Babka
2016-03-20 21:27 ` Stefan Priebe
2016-03-20 21:41 ` Greg KH
2016-03-21 10:52 ` Stefan Priebe - Profihost AG
2016-03-21 13:38 ` Greg KH
2016-05-17 6:01 ` Stefan Priebe - Profihost AG
2016-05-17 9:21 ` Campbell Steven
2016-06-22 1:19 ` Campbell Steven
2016-06-22 6:13 ` Peter Zijlstra
2016-07-06 23:20 ` Campbell Steven
2016-07-07 7:42 ` Peter Zijlstra
2016-07-09 5:21 ` Greg KH
2016-07-11 22:33 ` Greg KH
2016-07-12 13:12 ` Peter Zijlstra [this message]
2016-07-13 0:26 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160712131235.GO30154@twins.programming.kicks-ass.net \
--to=peterz@infradead.org \
--cc=casteven@gmail.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-mm@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=riel@redhat.com \
--cc=s.priebe@profihost.ag \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox