linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Dave Hansen <dave@sr71.net>
To: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org, x86@kernel.org, Dave Hansen <dave@sr71.net>,
	dave.hansen@linux.intel.com
Subject: [PATCH 22/32] x86, pkeys: dump PTE pkey in /proc/pid/smaps
Date: Mon, 14 Dec 2015 11:06:19 -0800	[thread overview]
Message-ID: <20151214190619.BA65327A@viggo.jf.intel.com> (raw)
In-Reply-To: <20151214190542.39C4886D@viggo.jf.intel.com>


From: Dave Hansen <dave.hansen@linux.intel.com>

The protection key can now be just as important as read/write
permissions on a VMA.  We need some debug mechanism to help
figure out if it is in play.  smaps seems like a logical
place to expose it.

arch/x86/kernel/setup.c is a bit of a weirdo place to put
this code, but it already had seq_file.h and there was not
a much better existing place to put it.

We also use no #ifdef.  If protection keys is .config'd out
we will get the same function as if we used the weak generic
function.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---

 b/arch/x86/kernel/setup.c |    9 +++++++++
 b/fs/proc/task_mmu.c      |   14 ++++++++++++++
 2 files changed, 23 insertions(+)

diff -puN arch/x86/kernel/setup.c~pkeys-40-smaps arch/x86/kernel/setup.c
--- a/arch/x86/kernel/setup.c~pkeys-40-smaps	2015-12-14 10:42:48.777070739 -0800
+++ b/arch/x86/kernel/setup.c	2015-12-14 10:42:48.782070963 -0800
@@ -112,6 +112,7 @@
 #include <asm/alternative.h>
 #include <asm/prom.h>
 #include <asm/microcode.h>
+#include <asm/mmu_context.h>
 
 /*
  * max_low_pfn_mapped: highest direct mapped pfn under 4GB
@@ -1282,3 +1283,11 @@ static int __init register_kernel_offset
 	return 0;
 }
 __initcall(register_kernel_offset_dumper);
+
+void arch_show_smap(struct seq_file *m, struct vm_area_struct *vma)
+{
+	if (!boot_cpu_has(X86_FEATURE_OSPKE))
+		return;
+
+	seq_printf(m, "ProtectionKey:  %8u\n", vma_pkey(vma));
+}
diff -puN fs/proc/task_mmu.c~pkeys-40-smaps fs/proc/task_mmu.c
--- a/fs/proc/task_mmu.c~pkeys-40-smaps	2015-12-14 10:42:48.779070829 -0800
+++ b/fs/proc/task_mmu.c	2015-12-14 10:42:48.783071008 -0800
@@ -615,11 +615,20 @@ static void show_smap_vma_flags(struct s
 		[ilog2(VM_MERGEABLE)]	= "mg",
 		[ilog2(VM_UFFD_MISSING)]= "um",
 		[ilog2(VM_UFFD_WP)]	= "uw",
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+		/* These come out via ProtectionKey: */
+		[ilog2(VM_PKEY_BIT0)]	= "",
+		[ilog2(VM_PKEY_BIT1)]	= "",
+		[ilog2(VM_PKEY_BIT2)]	= "",
+		[ilog2(VM_PKEY_BIT3)]	= "",
+#endif
 	};
 	size_t i;
 
 	seq_puts(m, "VmFlags: ");
 	for (i = 0; i < BITS_PER_LONG; i++) {
+		if (!mnemonics[i][0])
+			continue;
 		if (vma->vm_flags & (1UL << i)) {
 			seq_printf(m, "%c%c ",
 				   mnemonics[i][0], mnemonics[i][1]);
@@ -657,6 +666,10 @@ static int smaps_hugetlb_range(pte_t *pt
 }
 #endif /* HUGETLB_PAGE */
 
+void __weak arch_show_smap(struct seq_file *m, struct vm_area_struct *vma)
+{
+}
+
 static int show_smap(struct seq_file *m, void *v, int is_pid)
 {
 	struct vm_area_struct *vma = v;
@@ -713,6 +726,7 @@ static int show_smap(struct seq_file *m,
 		   (vma->vm_flags & VM_LOCKED) ?
 			(unsigned long)(mss.pss >> (10 + PSS_SHIFT)) : 0);
 
+	arch_show_smap(m, vma);
 	show_smap_vma_flags(m, vma);
 	m_cache_vma(m, vma);
 	return 0;
_

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2015-12-14 19:06 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-14 19:05 [PATCH 00/32] x86: Memory Protection Keys (v7) Dave Hansen
2015-12-14 19:05 ` [PATCH 01/32] mm, gup: introduce concept of "foreign" get_user_pages() Dave Hansen
2016-01-05 10:51   ` Vlastimil Babka
2016-01-06 17:43     ` Dave Hansen
2015-12-14 19:05 ` [PATCH 02/32] x86, fpu: add placeholder for Processor Trace XSAVE state Dave Hansen
2015-12-14 19:05 ` [PATCH 03/32] x86, pkeys: Add Kconfig option Dave Hansen
2015-12-14 19:05 ` [PATCH 04/32] x86, pkeys: cpuid bit definition Dave Hansen
2015-12-14 19:05 ` [PATCH 05/32] x86, pkeys: define new CR4 bit Dave Hansen
2015-12-14 19:05 ` [PATCH 06/32] x86, pkeys: add PKRU xsave fields and data structure(s) Dave Hansen
2015-12-14 19:05 ` [PATCH 07/32] x86, pkeys: PTE bits for storing protection key Dave Hansen
2015-12-14 19:05 ` [PATCH 08/32] x86, pkeys: new page fault error code bit: PF_PK Dave Hansen
2015-12-14 19:06 ` [PATCH 09/32] x86, pkeys: store protection in high VMA flags Dave Hansen
2015-12-14 19:06 ` [PATCH 10/32] x86, pkeys: arch-specific protection bits Dave Hansen
2015-12-14 19:06 ` [PATCH 11/32] x86, pkeys: pass VMA down in to fault signal generation code Dave Hansen
2015-12-14 19:06 ` [PATCH 12/32] signals, pkeys: notify userspace about protection key faults Dave Hansen
2015-12-14 19:06 ` [PATCH 13/32] x86, pkeys: fill in pkey field in siginfo Dave Hansen
2015-12-14 19:06 ` [PATCH 14/32] x86, pkeys: add functions to fetch PKRU Dave Hansen
2015-12-14 19:56   ` Thomas Gleixner
2015-12-14 19:06 ` [PATCH 15/32] mm: factor out VMA fault permission checking Dave Hansen
2015-12-14 19:06 ` [PATCH 16/32] x86, mm: simplify get_user_pages() PTE bit handling Dave Hansen
2015-12-14 19:56   ` Thomas Gleixner
2015-12-14 19:06 ` [PATCH 17/32] x86, pkeys: check VMAs and PTEs for protection keys Dave Hansen
2015-12-14 19:06 ` [PATCH 18/32] mm: add gup flag to indicate "foreign" mm access Dave Hansen
2015-12-14 19:06 ` [PATCH 19/32] x86, pkeys: optimize fault handling in access_error() Dave Hansen
2015-12-14 19:06 ` [PATCH 20/32] x86, pkeys: differentiate instruction fetches Dave Hansen
2015-12-14 19:06 ` [PATCH 21/32] x86, pkeys: dump PKRU with other kernel registers Dave Hansen
2015-12-14 19:06 ` Dave Hansen [this message]
2016-01-05 13:32   ` [PATCH 22/32] x86, pkeys: dump PTE pkey in /proc/pid/smaps Vlastimil Babka
2016-01-06 17:46     ` Dave Hansen
2015-12-14 19:06 ` [PATCH 23/32] x86, pkeys: add Kconfig prompt to existing config option Dave Hansen
2015-12-14 19:06 ` [PATCH 24/32] x86, pkeys: actually enable Memory Protection Keys in CPU Dave Hansen
2015-12-14 20:00   ` Thomas Gleixner
2015-12-14 19:06 ` [PATCH 25/32] mm, multi-arch: pass a protection key in to calc_vm_flag_bits() Dave Hansen
2015-12-14 19:06 ` [PATCH 26/32] x86, pkeys: add arch_validate_pkey() Dave Hansen
2015-12-14 19:06 ` [PATCH 27/32] x86: separate out LDT init from context init Dave Hansen
2015-12-14 19:06 ` [PATCH 28/32] x86, fpu: allow setting of XSAVE state Dave Hansen
2015-12-14 19:06 ` [PATCH 29/32] x86, pkeys: allow kernel to modify user pkey rights register Dave Hansen
2015-12-14 19:06 ` [PATCH 30/32] x86, pkeys: create an x86 arch_calc_vm_prot_bits() for VMA flags Dave Hansen
2015-12-14 19:06 ` [PATCH 31/32] x86, pkeys: execute-only support Dave Hansen
2015-12-14 20:05   ` Kees Cook
2015-12-14 23:37     ` Dave Hansen
2015-12-14 23:39       ` Andy Lutomirski
2015-12-14 23:41         ` Kees Cook
2015-12-14 23:44         ` Dave Hansen
2015-12-14 23:47           ` Andy Lutomirski
2015-12-15  0:26             ` Dave Hansen
2015-12-14 23:39       ` Kees Cook
2015-12-14 19:06 ` [PATCH 32/32] x86, pkeys: Documentation Dave Hansen
2015-12-24 11:37 ` [PATCH 00/32] x86: Memory Protection Keys (v7) Michael Kerrisk (man-pages)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151214190619.BA65327A@viggo.jf.intel.com \
    --to=dave@sr71.net \
    --cc=dave.hansen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox