From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Toshi Kani <toshi.kani@hp.com>
Cc: hpa@zytor.com, tglx@linutronix.de, mingo@redhat.com,
akpm@linux-foundation.org, arnd@arndb.de, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, jgross@suse.com,
stefan.bader@canonical.com, luto@amacapital.net, hmh@hmh.eng.br,
yigal@plexistor.com
Subject: Re: [PATCH v2 3/6] x86, mm, asm-gen: Add ioremap_wt() for WT
Date: Fri, 12 Sep 2014 15:42:58 -0400 [thread overview]
Message-ID: <20140912194258.GJ15656@laptop.dumpdata.com> (raw)
In-Reply-To: <1410367910-6026-4-git-send-email-toshi.kani@hp.com>
On Wed, Sep 10, 2014 at 10:51:47AM -0600, Toshi Kani wrote:
> This patch adds ioremap_wt() for creating WT mapping on x86.
> It follows the same model as ioremap_wc() for multi-architecture
> support. ARCH_HAS_IOREMAP_WT is defined in the x86 version of
> io.h to indicate that ioremap_wt() is implemented on x86.
>
> Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> ---
> arch/x86/include/asm/io.h | 2 ++
> arch/x86/mm/ioremap.c | 24 ++++++++++++++++++++++++
> include/asm-generic/io.h | 4 ++++
> include/asm-generic/iomap.h | 4 ++++
> 4 files changed, 34 insertions(+)
>
> diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
> index 71b9e65..c813c86 100644
> --- a/arch/x86/include/asm/io.h
> +++ b/arch/x86/include/asm/io.h
> @@ -35,6 +35,7 @@
> */
>
> #define ARCH_HAS_IOREMAP_WC
> +#define ARCH_HAS_IOREMAP_WT
>
> #include <linux/string.h>
> #include <linux/compiler.h>
> @@ -316,6 +317,7 @@ extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
> extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
> enum page_cache_mode pcm);
> extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size);
> +extern void __iomem *ioremap_wt(resource_size_t offset, unsigned long size);
>
> extern bool is_early_ioremap_ptep(pte_t *ptep);
>
> diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
> index 885fe44..952f4b4 100644
> --- a/arch/x86/mm/ioremap.c
> +++ b/arch/x86/mm/ioremap.c
> @@ -155,6 +155,10 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
> prot = __pgprot(pgprot_val(prot) |
> cachemode2protval(_PAGE_CACHE_MODE_WC));
> break;
> + case _PAGE_CACHE_MODE_WT:
> + prot = __pgprot(pgprot_val(prot) |
> + cachemode2protval(_PAGE_CACHE_MODE_WT));
> + break;
> case _PAGE_CACHE_MODE_WB:
> break;
> }
> @@ -249,6 +253,26 @@ void __iomem *ioremap_wc(resource_size_t phys_addr, unsigned long size)
> }
> EXPORT_SYMBOL(ioremap_wc);
>
> +/**
> + * ioremap_wt - map memory into CPU space write through
> + * @phys_addr: bus address of the memory
> + * @size: size of the resource to map
> + *
> + * This version of ioremap ensures that the memory is marked write through.
> + * Write through writes data into memory while keeping the cache up-to-date.
> + *
> + * Must be freed with iounmap.
> + */
> +void __iomem *ioremap_wt(resource_size_t phys_addr, unsigned long size)
> +{
> + if (pat_enabled)
> + return __ioremap_caller(phys_addr, size, _PAGE_CACHE_MODE_WT,
> + __builtin_return_address(0));
> + else
> + return ioremap_nocache(phys_addr, size);
> +}
> +EXPORT_SYMBOL(ioremap_wt);
> +
> void __iomem *ioremap_cache(resource_size_t phys_addr, unsigned long size)
> {
> return __ioremap_caller(phys_addr, size, _PAGE_CACHE_MODE_WB,
> diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
> index 975e1cc..405d418 100644
> --- a/include/asm-generic/io.h
> +++ b/include/asm-generic/io.h
> @@ -322,6 +322,10 @@ static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
> #define ioremap_wc ioremap_nocache
> #endif
>
> +#ifndef ioremap_wt
> +#define ioremap_wt ioremap_nocache
> +#endif
> +
> static inline void iounmap(void __iomem *addr)
> {
> }
> diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h
> index 1b41011..d8f8622 100644
> --- a/include/asm-generic/iomap.h
> +++ b/include/asm-generic/iomap.h
> @@ -66,6 +66,10 @@ extern void ioport_unmap(void __iomem *);
> #define ioremap_wc ioremap_nocache
> #endif
>
> +#ifndef ARCH_HAS_IOREMAP_WT
> +#define ioremap_wt ioremap_nocache
> +#endif
> +
> #ifdef CONFIG_PCI
> /* Destroy a virtual mapping cookie for a PCI BAR (memory or IO) */
> struct pci_dev;
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-09-12 19:43 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 16:51 [PATCH v2 0/6] Support Write-Through mapping on x86 Toshi Kani
2014-09-10 16:51 ` [PATCH v2 1/6] x86, mm, pat: Set WT to PA4 slot of PAT MSR Toshi Kani
2014-09-12 19:33 ` Konrad Rzeszutek Wilk
2014-09-12 20:45 ` Toshi Kani
2014-09-10 16:51 ` [PATCH v2 2/6] x86, mm, pat: Change reserve_memtype() to handle WT Toshi Kani
2014-09-10 18:26 ` Andy Lutomirski
2014-09-10 19:14 ` H. Peter Anvin
2014-09-10 19:30 ` Toshi Kani
2014-09-10 20:14 ` H. Peter Anvin
2014-09-10 20:30 ` Toshi Kani
2014-09-10 21:06 ` Andy Lutomirski
2014-09-10 21:11 ` Toshi Kani
2014-09-10 21:27 ` Andy Lutomirski
2014-09-10 21:25 ` Toshi Kani
2014-09-10 21:39 ` H. Peter Anvin
2014-09-10 21:39 ` H. Peter Anvin
2014-09-10 21:47 ` Toshi Kani
2014-09-10 22:00 ` H. Peter Anvin
2014-09-10 23:24 ` Toshi Kani
2014-09-10 20:31 ` Andy Lutomirski
2014-09-12 19:41 ` Konrad Rzeszutek Wilk
2014-09-10 16:51 ` [PATCH v2 3/6] x86, mm, asm-gen: Add ioremap_wt() for WT Toshi Kani
2014-09-10 18:29 ` Andy Lutomirski
2014-09-10 19:40 ` Toshi Kani
2014-09-10 20:08 ` Andy Lutomirski
2014-09-12 19:42 ` Konrad Rzeszutek Wilk [this message]
2014-09-10 16:51 ` [PATCH v2 4/6] x86, mm: Add set_memory_wt() " Toshi Kani
2014-09-12 19:47 ` Konrad Rzeszutek Wilk
2014-09-10 16:51 ` [PATCH v2 5/6] x86, mm, pat: Add pgprot_writethrough() " Toshi Kani
2014-09-12 19:47 ` Konrad Rzeszutek Wilk
2014-09-10 16:51 ` [PATCH v2 6/6] x86, pat: Update documentation for WT changes Toshi Kani
2014-09-10 18:30 ` Andy Lutomirski
2014-09-10 20:12 ` Toshi Kani
2014-09-10 20:29 ` Andy Lutomirski
2014-09-10 21:34 ` Toshi Kani
2014-09-15 21:19 ` Toshi Kani
2014-09-16 1:22 ` Andy Lutomirski
2014-09-16 16:52 ` Toshi Kani
2014-09-16 21:45 ` Yigal Korman
2014-09-16 22:13 ` Toshi Kani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140912194258.GJ15656@laptop.dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=hmh@hmh.eng.br \
--cc=hpa@zytor.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=luto@amacapital.net \
--cc=mingo@redhat.com \
--cc=stefan.bader@canonical.com \
--cc=tglx@linutronix.de \
--cc=toshi.kani@hp.com \
--cc=yigal@plexistor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox