From: Seth Jennings <sjennings@variantweb.net>
To: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>,
Weijie Yang <weijie.yang@samsung.com>,
Nitin Gupta <ngupta@vflare.org>,
Andrew Morton <akpm@linux-foundation.org>,
Bob Liu <bob.liu@oracle.com>, Hugh Dickins <hughd@google.com>,
Mel Gorman <mgorman@suse.de>, Rik van Riel <riel@redhat.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Sergey Senozhatsky <sergey.senozhatsky@gmail.com>,
Linux-MM <linux-mm@kvack.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/4] mm/zbud: change zbud_alloc size type to size_t
Date: Thu, 8 May 2014 22:33:46 -0500 [thread overview]
Message-ID: <20140509033346.GB2274@cerebellum.variantweb.net> (raw)
In-Reply-To: <1399499496-3216-3-git-send-email-ddstreet@ieee.org>
On Wed, May 07, 2014 at 05:51:34PM -0400, Dan Streetman wrote:
> Change the type of the zbud_alloc() size param from unsigned int
> to size_t.
>
> Technically, this should not make any difference, as the zbud
> implementation already restricts the size to well within either
> type's limits; but as zsmalloc (and kmalloc) use size_t, and
> zpool will use size_t, this brings the size parameter type
> in line with zsmalloc/zpool.
Acked-by: Seth Jennings <sjennings@variantweb.net>
>
> Signed-off-by: Dan Streetman <ddstreet@ieee.org>
> Cc: Seth Jennings <sjennings@variantweb.net>
> Cc: Weijie Yang <weijie.yang@samsung.com>
> ---
>
> While the rest of the patches in this set are v2, this is new for
> the set; previously a patch to implement zsmalloc shrinking was
> here, but that's removed. This patch instead changes the
> zbud_alloc() size parameter type from unsigned int to size_t, to
> be the same as the zsmalloc and zpool size param type.
>
> include/linux/zbud.h | 2 +-
> mm/zbud.c | 5 ++---
> 2 files changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/include/linux/zbud.h b/include/linux/zbud.h
> index 0b2534e..1e9cb57 100644
> --- a/include/linux/zbud.h
> +++ b/include/linux/zbud.h
> @@ -11,7 +11,7 @@ struct zbud_ops {
>
> struct zbud_pool *zbud_create_pool(gfp_t gfp, struct zbud_ops *ops);
> void zbud_destroy_pool(struct zbud_pool *pool);
> -int zbud_alloc(struct zbud_pool *pool, unsigned int size,
> +int zbud_alloc(struct zbud_pool *pool, size_t size,
> unsigned long *handle);
> void zbud_free(struct zbud_pool *pool, unsigned long handle);
> int zbud_reclaim_page(struct zbud_pool *pool, unsigned int retries);
> diff --git a/mm/zbud.c b/mm/zbud.c
> index 847c01c..dd13665 100644
> --- a/mm/zbud.c
> +++ b/mm/zbud.c
> @@ -123,7 +123,7 @@ enum buddy {
> };
>
> /* Converts an allocation size in bytes to size in zbud chunks */
> -static int size_to_chunks(int size)
> +static int size_to_chunks(size_t size)
> {
> return (size + CHUNK_SIZE - 1) >> CHUNK_SHIFT;
> }
> @@ -250,8 +250,7 @@ void zbud_destroy_pool(struct zbud_pool *pool)
> * -EINVAL if the @size is 0, or -ENOMEM if the pool was unable to
> * allocate a new page.
> */
> -int zbud_alloc(struct zbud_pool *pool, unsigned int size,
> - unsigned long *handle)
> +int zbud_alloc(struct zbud_pool *pool, size_t size, unsigned long *handle)
> {
> int chunks, i, freechunks;
> struct zbud_header *zhdr = NULL;
> --
> 1.8.3.1
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-05-09 3:33 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-19 15:52 [PATCH 0/4] mm: zpool: add common api for zswap to use zbud/zsmalloc Dan Streetman
2014-04-19 15:52 ` [PATCH 1/4] mm: zpool: zbud_alloc() minor param change Dan Streetman
2014-04-19 15:52 ` [PATCH 2/4] mm: zpool: implement zsmalloc shrinking Dan Streetman
2014-04-26 8:37 ` Weijie Yang
2014-04-27 4:13 ` Dan Streetman
2014-05-02 20:01 ` Seth Jennings
2014-05-04 20:38 ` Dan Streetman
2014-04-19 15:52 ` [PATCH 3/4] mm: zpool: implement common zpool api to zbud/zsmalloc Dan Streetman
2014-04-22 10:05 ` Sergey Senozhatsky
2014-04-22 13:43 ` Dan Streetman
2014-04-19 15:52 ` [PATCH 4/4] mm: zpool: update zswap to use zpool Dan Streetman
2014-04-21 2:47 ` [PATCH 0/4] mm: zpool: add common api for zswap to use zbud/zsmalloc Weijie Yang
2014-05-07 21:51 ` [PATCHv2 0/4] mm/zpool: " Dan Streetman
2014-05-07 21:51 ` [PATCHv2 1/4] mm/zbud: zbud_alloc() minor param change Dan Streetman
2014-05-09 3:33 ` Seth Jennings
2014-05-07 21:51 ` [PATCH 2/4] mm/zbud: change zbud_alloc size type to size_t Dan Streetman
2014-05-09 3:33 ` Seth Jennings [this message]
2014-05-07 21:51 ` [PATCHv2 3/4] mm/zpool: implement common zpool api to zbud/zsmalloc Dan Streetman
2014-05-09 4:13 ` Seth Jennings
2014-05-10 16:06 ` Dan Streetman
2014-05-07 21:51 ` [PATCHv2 4/4] mm/zswap: update zswap to use zpool Dan Streetman
2014-05-24 19:06 ` [PATCHv3 0/6] mm/zpool: add common api for zswap to use zbud/zsmalloc Dan Streetman
2014-05-24 19:06 ` [PATCHv2 1/6] mm/zbud: zbud_alloc() minor param change Dan Streetman
2014-05-24 19:06 ` [PATCH 2/6] mm/zbud: change zbud_alloc size type to size_t Dan Streetman
2014-05-24 19:06 ` [PATCHv3 3/6] mm/zpool: implement common zpool api to zbud/zsmalloc Dan Streetman
2014-05-27 22:06 ` Seth Jennings
2014-05-27 22:48 ` Seth Jennings
2014-05-28 0:06 ` Dan Streetman
2014-05-29 3:48 ` Seth Jennings
2014-05-24 19:06 ` [PATCH 4/6] mm/zpool: zbud/zsmalloc implement zpool Dan Streetman
2014-05-24 19:06 ` [PATCHv3 5/6] mm/zpool: update zswap to use zpool Dan Streetman
2014-05-24 19:06 ` [PATCH 6/6] mm/zpool: prevent zbud/zsmalloc from unloading when used Dan Streetman
2014-05-27 22:40 ` Seth Jennings
2014-05-28 0:40 ` Dan Streetman
2014-05-27 22:44 ` [PATCHv3 0/6] mm/zpool: add common api for zswap to use zbud/zsmalloc Seth Jennings
2014-06-02 22:19 ` [PATCHv4 " Dan Streetman
2014-06-02 22:19 ` [PATCHv2 1/6] mm/zbud: zbud_alloc() minor param change Dan Streetman
2014-06-23 21:19 ` Andrew Morton
2014-06-24 15:24 ` Dan Streetman
2014-06-02 22:19 ` [PATCH 2/6] mm/zbud: change zbud_alloc size type to size_t Dan Streetman
2014-06-02 22:19 ` [PATCHv4 3/6] mm/zpool: implement common zpool api to zbud/zsmalloc Dan Streetman
2014-06-23 21:46 ` Andrew Morton
2014-06-24 15:39 ` Dan Streetman
2014-06-24 23:08 ` Andrew Morton
2014-06-27 17:11 ` Dan Streetman
2014-06-27 19:17 ` Andrew Morton
2014-06-02 22:19 ` [PATCHv2 4/6] mm/zpool: zbud/zsmalloc implement zpool Dan Streetman
2014-06-02 22:19 ` [PATCHv4 5/6] mm/zpool: update zswap to use zpool Dan Streetman
2014-06-02 22:19 ` [PATCHv2 6/6] mm/zpool: prevent zbud/zsmalloc from unloading when used Dan Streetman
2014-06-23 21:48 ` Andrew Morton
2014-06-24 15:41 ` Dan Streetman
2014-06-04 1:38 ` [PATCHv4 0/6] mm/zpool: add common api for zswap to use zbud/zsmalloc Bob Liu
2014-06-06 21:01 ` Seth Jennings
2014-07-02 21:43 ` [PATCHv5 0/4] " Dan Streetman
2014-07-02 21:45 ` Dan Streetman
2014-07-02 21:45 ` [PATCHv2 1/4] mm/zbud: change zbud_alloc size type to size_t Dan Streetman
2014-07-02 21:45 ` [PATCHv5 2/4] mm/zpool: implement common zpool api to zbud/zsmalloc Dan Streetman
2014-07-02 21:45 ` [PATCHv3 3/4] mm/zpool: zbud/zsmalloc implement zpool Dan Streetman
2014-07-02 21:45 ` [PATCHv5 4/4] mm/zpool: update zswap to use zpool Dan Streetman
2014-07-14 18:10 ` [PATCHv5 0/4] mm/zpool: add common api for zswap to use zbud/zsmalloc Dan Streetman
2014-07-16 20:59 ` Seth Jennings
2014-07-16 21:05 ` Dan Streetman
2014-07-16 22:00 ` Seth Jennings
2014-07-25 16:59 ` Dan Streetman
2014-07-28 20:40 ` Seth Jennings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140509033346.GB2274@cerebellum.variantweb.net \
--to=sjennings@variantweb.net \
--cc=akpm@linux-foundation.org \
--cc=bob.liu@oracle.com \
--cc=ddstreet@ieee.org \
--cc=hannes@cmpxchg.org \
--cc=hughd@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=minchan@kernel.org \
--cc=ngupta@vflare.org \
--cc=riel@redhat.com \
--cc=sergey.senozhatsky@gmail.com \
--cc=weijie.yang@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox