From: Dave Hansen <dave@sr71.net>
To: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org, akpm@linux-foundation.org,
Dave Hansen <dave@sr71.net>,
dave.hansen@linux.intel.com, cl@linux.com, rientjes@google.com
Subject: [PATCH] mm: slab/slub: use page->list consistently instead of page->lru
Date: Wed, 05 Feb 2014 12:29:45 -0800 [thread overview]
Message-ID: <20140205202945.4C31B693@viggo.jf.intel.com> (raw)
Andrew, I sent this out along with a bunch of other slab stuff,
but I think it stands alone and should get pulled in by itself.
--
From: Dave Hansen <dave.hansen@linux.intel.com>
'struct page' has two list_head fields: 'lru' and 'list'.
Conveniently, they are unioned together. This means that code
can use them interchangably, which gets horribly confusing like
with this nugget from slab.c:
> list_del(&page->lru);
> if (page->active == cachep->num)
> list_add(&page->list, &n->slabs_full);
This patch makes the slab and slub code use page->lru
universally instead of mixing ->list and ->lru.
So, the new rule is: page->lru is what the you use if you want to
keep your page on a list. Don't like the fact that it's not
called ->list? Too bad.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
---
b/include/linux/mm_types.h | 3 ++-
b/mm/slab.c | 4 ++--
b/mm/slob.c | 10 +++++-----
3 files changed, 9 insertions(+), 8 deletions(-)
diff -puN include/linux/mm_types.h~make-slab-use-page-lru-vs-list-consistently include/linux/mm_types.h
--- a/include/linux/mm_types.h~make-slab-use-page-lru-vs-list-consistently 2014-02-05 12:28:13.655176289 -0800
+++ b/include/linux/mm_types.h 2014-02-05 12:28:13.662176603 -0800
@@ -124,6 +124,8 @@ struct page {
union {
struct list_head lru; /* Pageout list, eg. active_list
* protected by zone->lru_lock !
+ * Can be used as a generic list
+ * by the page owner.
*/
struct { /* slub per cpu partial pages */
struct page *next; /* Next partial slab */
@@ -136,7 +138,6 @@ struct page {
#endif
};
- struct list_head list; /* slobs list of pages */
struct slab *slab_page; /* slab fields */
struct rcu_head rcu_head; /* Used by SLAB
* when destroying via RCU
diff -puN mm/slab.c~make-slab-use-page-lru-vs-list-consistently mm/slab.c
--- a/mm/slab.c~make-slab-use-page-lru-vs-list-consistently 2014-02-05 12:28:13.657176378 -0800
+++ b/mm/slab.c 2014-02-05 12:28:13.664176693 -0800
@@ -2886,9 +2886,9 @@ retry:
/* move slabp to correct slabp list: */
list_del(&page->lru);
if (page->active == cachep->num)
- list_add(&page->list, &n->slabs_full);
+ list_add(&page->lru, &n->slabs_full);
else
- list_add(&page->list, &n->slabs_partial);
+ list_add(&page->lru, &n->slabs_partial);
}
must_grow:
diff -puN mm/slob.c~make-slab-use-page-lru-vs-list-consistently mm/slob.c
--- a/mm/slob.c~make-slab-use-page-lru-vs-list-consistently 2014-02-05 12:28:13.659176468 -0800
+++ b/mm/slob.c 2014-02-05 12:28:13.664176693 -0800
@@ -111,13 +111,13 @@ static inline int slob_page_free(struct
static void set_slob_page_free(struct page *sp, struct list_head *list)
{
- list_add(&sp->list, list);
+ list_add(&sp->lru, list);
__SetPageSlobFree(sp);
}
static inline void clear_slob_page_free(struct page *sp)
{
- list_del(&sp->list);
+ list_del(&sp->lru);
__ClearPageSlobFree(sp);
}
@@ -282,7 +282,7 @@ static void *slob_alloc(size_t size, gfp
spin_lock_irqsave(&slob_lock, flags);
/* Iterate through each partially free page, try to find room */
- list_for_each_entry(sp, slob_list, list) {
+ list_for_each_entry(sp, slob_list, lru) {
#ifdef CONFIG_NUMA
/*
* If there's a node specification, search for a partial
@@ -296,7 +296,7 @@ static void *slob_alloc(size_t size, gfp
continue;
/* Attempt to alloc */
- prev = sp->list.prev;
+ prev = sp->lru.prev;
b = slob_page_alloc(sp, size, align);
if (!b)
continue;
@@ -322,7 +322,7 @@ static void *slob_alloc(size_t size, gfp
spin_lock_irqsave(&slob_lock, flags);
sp->units = SLOB_UNITS(PAGE_SIZE);
sp->freelist = b;
- INIT_LIST_HEAD(&sp->list);
+ INIT_LIST_HEAD(&sp->lru);
set_slob(b, SLOB_UNITS(PAGE_SIZE), b + SLOB_UNITS(PAGE_SIZE));
set_slob_page_free(sp, slob_list);
b = slob_page_alloc(sp, size, align);
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
reply other threads:[~2014-02-05 20:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140205202945.4C31B693@viggo.jf.intel.com \
--to=dave@sr71.net \
--cc=akpm@linux-foundation.org \
--cc=cl@linux.com \
--cc=dave.hansen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=rientjes@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox