From: Wanpeng Li <liwanp@linux.vnet.ibm.com>
To: Dave Hansen <dave@sr71.net>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
akpm@linux-foundation.org, mgorman@suse.de,
tim.c.chen@linux.intel.com, minchan@kernel.org
Subject: Re: [v5][PATCH 1/6] mm: swap: defer clearing of page_private() for swap cache pages
Date: Mon, 15 Jul 2013 07:47:42 +0800 [thread overview]
Message-ID: <20130714234741.GA23628@hacker.(null)> (raw)
In-Reply-To: <20130603200204.C481DA6D@viggo.jf.intel.com>
On Mon, Jun 03, 2013 at 01:02:04PM -0700, Dave Hansen wrote:
>
>From: Dave Hansen <dave.hansen@linux.intel.com>
>
>This patch defers the destruction of swapcache-specific data in
>'struct page'. This simplifies the code because we do not have
>to keep extra copies of the data during the removal of a page
>from the swap cache.
>
>There are only two callers of swapcache_free() which actually
>pass in a non-NULL 'struct page'. Both of them (__remove_mapping
>and delete_from_swap_cache()) create a temporary on-stack
>'swp_entry_t' and set entry.val to page_private().
>
>They need to do this since __delete_from_swap_cache() does
>set_page_private(page, 0) and destroys the information.
>
>However, I'd like to batch a few of these operations on several
>pages together in a new version of __remove_mapping(), and I
>would prefer not to have to allocate temporary storage for each
>page. The code is pretty ugly, and it's a bit silly to create
>these on-stack 'swp_entry_t's when it is so easy to just keep the
>information around in 'struct page'.
>
>There should not be any danger in doing this since we are
>absolutely on the path of freeing these page. There is no
>turning back, and no other rerferences can be obtained after it
>comes out of the radix tree.
>
>Note: This patch is separate from the next one since it
>introduces the behavior change. I've seen issues with this patch
>by itself in various forms and I think having it separate like
>this aids bisection.
>
>Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
>Acked-by: Mel Gorman <mgorman@suse.de>
>Reviewed-by: Minchan Kin <minchan@kernel.org>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
>---
>
> linux.git-davehans/mm/swap_state.c | 4 ++--
> linux.git-davehans/mm/vmscan.c | 2 ++
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
>diff -puN mm/swap_state.c~__delete_from_swap_cache-dont-clear-page-private mm/swap_state.c
>--- linux.git/mm/swap_state.c~__delete_from_swap_cache-dont-clear-page-private 2013-06-03 12:41:30.321703206 -0700
>+++ linux.git-davehans/mm/swap_state.c 2013-06-03 12:41:30.326703428 -0700
>@@ -148,8 +148,6 @@ void __delete_from_swap_cache(struct pag
> entry.val = page_private(page);
> address_space = swap_address_space(entry);
> radix_tree_delete(&address_space->page_tree, page_private(page));
>- set_page_private(page, 0);
>- ClearPageSwapCache(page);
> address_space->nrpages--;
> __dec_zone_page_state(page, NR_FILE_PAGES);
> INC_CACHE_INFO(del_total);
>@@ -226,6 +224,8 @@ void delete_from_swap_cache(struct page
> spin_unlock_irq(&address_space->tree_lock);
>
> swapcache_free(entry, page);
>+ set_page_private(page, 0);
>+ ClearPageSwapCache(page);
> page_cache_release(page);
> }
>
>diff -puN mm/vmscan.c~__delete_from_swap_cache-dont-clear-page-private mm/vmscan.c
>--- linux.git/mm/vmscan.c~__delete_from_swap_cache-dont-clear-page-private 2013-06-03 12:41:30.323703296 -0700
>+++ linux.git-davehans/mm/vmscan.c 2013-06-03 12:41:30.328703516 -0700
>@@ -494,6 +494,8 @@ static int __remove_mapping(struct addre
> __delete_from_swap_cache(page);
> spin_unlock_irq(&mapping->tree_lock);
> swapcache_free(swap, page);
>+ set_page_private(page, 0);
>+ ClearPageSwapCache(page);
> } else {
> void (*freepage)(struct page *);
>
>_
>
>--
>To unsubscribe, send a message with 'unsubscribe linux-mm' in
>the body to majordomo@kvack.org. For more info on Linux MM,
>see: http://www.linux-mm.org/ .
>Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-07-14 23:47 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-03 20:02 [v5][PATCH 0/6] mm: vmscan: Batch page reclamation under shink_page_list Dave Hansen
2013-06-03 20:02 ` [v5][PATCH 1/6] mm: swap: defer clearing of page_private() for swap cache pages Dave Hansen
2013-07-14 23:47 ` Wanpeng Li [this message]
2013-07-14 23:47 ` Wanpeng Li
2013-06-03 20:02 ` [v5][PATCH 2/6] mm: swap: make 'struct page' and swp_entry_t variants of swapcache_free() Dave Hansen
2013-07-14 23:48 ` Wanpeng Li
2013-07-14 23:48 ` Wanpeng Li
2013-06-03 20:02 ` [v5][PATCH 3/6] mm: vmscan: break up __remove_mapping() Dave Hansen
2013-07-14 23:49 ` Wanpeng Li
2013-07-14 23:49 ` Wanpeng Li
2013-06-03 20:02 ` [v5][PATCH 4/6] mm: vmscan: break out mapping "freepage" code Dave Hansen
2013-07-14 23:49 ` Wanpeng Li
2013-07-14 23:49 ` Wanpeng Li
2013-06-03 20:02 ` [v5][PATCH 5/6] mm: vmscan: batch shrink_page_list() locking operations Dave Hansen
2013-06-04 1:17 ` Hillf Danton
2013-06-04 5:07 ` Minchan Kim
2013-06-04 15:22 ` Dave Hansen
2013-06-05 7:28 ` Hillf Danton
2013-06-05 7:57 ` Minchan Kim
2013-06-05 14:24 ` Dave Hansen
2013-06-04 5:01 ` Minchan Kim
2013-06-04 6:02 ` Minchan Kim
2013-06-04 15:29 ` Dave Hansen
2013-06-04 23:32 ` Minchan Kim
2013-06-04 6:10 ` Dave Hansen
2013-06-04 6:59 ` Minchan Kim
2013-07-14 23:50 ` Wanpeng Li
2013-07-14 23:50 ` Wanpeng Li
2013-06-03 20:02 ` [v5][PATCH 6/6] mm: vmscan: drain batch list during long operations Dave Hansen
2013-06-04 6:05 ` Minchan Kim
2013-06-04 15:24 ` Dave Hansen
2013-06-04 23:23 ` Minchan Kim
2013-06-04 23:31 ` Dave Hansen
2013-06-04 23:36 ` Minchan Kim
2013-06-04 23:37 ` Minchan Kim
2013-07-14 23:51 ` Wanpeng Li
2013-07-14 23:51 ` Wanpeng Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='20130714234741.GA23628@hacker.(null)' \
--to=liwanp@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=dave@sr71.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=minchan@kernel.org \
--cc=tim.c.chen@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox