From: Vivek Goyal <vgoyal@redhat.com>
To: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: ebiederm@xmission.com, akpm@linux-foundation.org, cpw@sgi.com,
kumagai-atsushi@mxc.nes.nec.co.jp, lisa.mitchell@hp.com,
kexec@lists.infradead.org, linux-kernel@vger.kernel.org,
zhangyanfei@cn.fujitsu.com, jingbai.ma@hp.com,
linux-mm@kvack.org
Subject: Re: [PATCH v5 2/8] vmcore: clean up read_vmcore()
Date: Tue, 14 May 2013 10:46:02 -0400 [thread overview]
Message-ID: <20130514144602.GB16772@redhat.com> (raw)
In-Reply-To: <20130514015717.18697.43144.stgit@localhost6.localdomain6>
On Tue, May 14, 2013 at 10:57:17AM +0900, HATAYAMA Daisuke wrote:
> Rewrite part of read_vmcore() that reads objects in vmcore_list in the
> same way as part reading ELF headers, by which some duplicated and
> redundant codes are removed.
>
> Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Looks good to me.
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Vivek
> ---
>
> fs/proc/vmcore.c | 68 ++++++++++++++++--------------------------------------
> 1 files changed, 20 insertions(+), 48 deletions(-)
>
> diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
> index 69e1198..48886e6 100644
> --- a/fs/proc/vmcore.c
> +++ b/fs/proc/vmcore.c
> @@ -119,27 +119,6 @@ static ssize_t read_from_oldmem(char *buf, size_t count,
> return read;
> }
>
> -/* Maps vmcore file offset to respective physical address in memroy. */
> -static u64 map_offset_to_paddr(loff_t offset, struct list_head *vc_list,
> - struct vmcore **m_ptr)
> -{
> - struct vmcore *m;
> - u64 paddr;
> -
> - list_for_each_entry(m, vc_list, list) {
> - u64 start, end;
> - start = m->offset;
> - end = m->offset + m->size - 1;
> - if (offset >= start && offset <= end) {
> - paddr = m->paddr + offset - start;
> - *m_ptr = m;
> - return paddr;
> - }
> - }
> - *m_ptr = NULL;
> - return 0;
> -}
> -
> /* Read from the ELF header and then the crash dump. On error, negative value is
> * returned otherwise number of bytes read are returned.
> */
> @@ -148,8 +127,8 @@ static ssize_t read_vmcore(struct file *file, char __user *buffer,
> {
> ssize_t acc = 0, tmp;
> size_t tsz;
> - u64 start, nr_bytes;
> - struct vmcore *curr_m = NULL;
> + u64 start;
> + struct vmcore *m = NULL;
>
> if (buflen == 0 || *fpos >= vmcore_size)
> return 0;
> @@ -175,33 +154,26 @@ static ssize_t read_vmcore(struct file *file, char __user *buffer,
> return acc;
> }
>
> - start = map_offset_to_paddr(*fpos, &vmcore_list, &curr_m);
> - if (!curr_m)
> - return -EINVAL;
> -
> - while (buflen) {
> - tsz = min_t(size_t, buflen, PAGE_SIZE - (start & ~PAGE_MASK));
> -
> - /* Calculate left bytes in current memory segment. */
> - nr_bytes = (curr_m->size - (start - curr_m->paddr));
> - if (tsz > nr_bytes)
> - tsz = nr_bytes;
> -
> - tmp = read_from_oldmem(buffer, tsz, &start, 1);
> - if (tmp < 0)
> - return tmp;
> - buflen -= tsz;
> - *fpos += tsz;
> - buffer += tsz;
> - acc += tsz;
> - if (start >= (curr_m->paddr + curr_m->size)) {
> - if (curr_m->list.next == &vmcore_list)
> - return acc; /*EOF*/
> - curr_m = list_entry(curr_m->list.next,
> - struct vmcore, list);
> - start = curr_m->paddr;
> + list_for_each_entry(m, &vmcore_list, list) {
> + if (*fpos < m->offset + m->size) {
> + tsz = m->offset + m->size - *fpos;
> + if (buflen < tsz)
> + tsz = buflen;
> + start = m->paddr + *fpos - m->offset;
> + tmp = read_from_oldmem(buffer, tsz, &start, 1);
> + if (tmp < 0)
> + return tmp;
> + buflen -= tsz;
> + *fpos += tsz;
> + buffer += tsz;
> + acc += tsz;
> +
> + /* leave now if filled buffer already */
> + if (buflen == 0)
> + return acc;
> }
> }
> +
> return acc;
> }
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-05-14 14:46 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-14 1:57 [PATCH v5 0/8] kdump, vmcore: support mmap() on /proc/vmcore HATAYAMA Daisuke
2013-05-14 1:57 ` [PATCH v5 1/8] vmcore: allocate buffer for ELF headers on page-size alignment HATAYAMA Daisuke
2013-05-14 14:45 ` Vivek Goyal
2013-05-14 1:57 ` [PATCH v5 2/8] vmcore: clean up read_vmcore() HATAYAMA Daisuke
2013-05-14 14:46 ` Vivek Goyal [this message]
2013-05-14 1:57 ` [PATCH v5 3/8] vmalloc: make find_vm_area check in range HATAYAMA Daisuke
2013-05-14 14:50 ` Vivek Goyal
2013-05-14 1:57 ` [PATCH v5 4/8] vmalloc: introduce remap_vmalloc_range_partial HATAYAMA Daisuke
2013-05-14 14:59 ` Vivek Goyal
2013-05-14 1:57 ` [PATCH v5 5/8] vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory HATAYAMA Daisuke
2013-05-14 15:35 ` Vivek Goyal
2013-05-15 8:29 ` HATAYAMA Daisuke
2013-05-14 15:57 ` Vivek Goyal
2013-05-14 1:57 ` [PATCH v5 6/8] vmcore: treat memory chunks referenced by PT_LOAD program header entries in page-size boundary in vmcore_list HATAYAMA Daisuke
2013-05-14 16:42 ` Vivek Goyal
2013-05-14 1:57 ` [PATCH v5 7/8] vmcore: calculate vmcore file size from buffer size and total size of vmcore objects HATAYAMA Daisuke
2013-05-14 16:47 ` Vivek Goyal
2013-05-15 8:25 ` HATAYAMA Daisuke
2013-05-14 1:57 ` [PATCH v5 8/8] vmcore: support mmap() on /proc/vmcore HATAYAMA Daisuke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130514144602.GB16772@redhat.com \
--to=vgoyal@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=cpw@sgi.com \
--cc=d.hatayama@jp.fujitsu.com \
--cc=ebiederm@xmission.com \
--cc=jingbai.ma@hp.com \
--cc=kexec@lists.infradead.org \
--cc=kumagai-atsushi@mxc.nes.nec.co.jp \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lisa.mitchell@hp.com \
--cc=zhangyanfei@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox