From: Michal Hocko <mhocko@suse.cz>
To: Glauber Costa <glommer@parallels.com>
Cc: linux-mm@kvack.org, cgroups@vger.kernel.org,
Mel Gorman <mgorman@suse.de>, Tejun Heo <tj@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Johannes Weiner <hannes@cmpxchg.org>,
kamezawa.hiroyu@jp.fujitsu.com, Christoph Lameter <cl@linux.com>,
David Rientjes <rientjes@google.com>,
Pekka Enberg <penberg@kernel.org>,
devel@openvz.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 04/14] kmem accounting basic infrastructure
Date: Tue, 16 Oct 2012 14:14:58 +0200 [thread overview]
Message-ID: <20121016121458.GE13991@dhcp22.suse.cz> (raw)
In-Reply-To: <1350382611-20579-5-git-send-email-glommer@parallels.com>
On Tue 16-10-12 14:16:41, Glauber Costa wrote:
> This patch adds the basic infrastructure for the accounting of kernel
> memory. To control that, the following files are created:
>
> * memory.kmem.usage_in_bytes
> * memory.kmem.limit_in_bytes
> * memory.kmem.failcnt
> * memory.kmem.max_usage_in_bytes
>
> They have the same meaning of their user memory counterparts. They
> reflect the state of the "kmem" res_counter.
>
> Per cgroup kmem memory accounting is not enabled until a limit is set
> for the group. Once the limit is set the accounting cannot be disabled
> for that group. This means that after the patch is applied, no
> behavioral changes exists for whoever is still using memcg to control
> their memory usage, until memory.kmem.limit_in_bytes is set for the
> first time.
>
> We always account to both user and kernel resource_counters. This
> effectively means that an independent kernel limit is in place when the
> limit is set to a lower value than the user memory. A equal or higher
> value means that the user limit will always hit first, meaning that kmem
> is effectively unlimited.
>
> People who want to track kernel memory but not limit it, can set this
> limit to a very high number (like RESOURCE_MAX - 1page - that no one
> will ever hit, or equal to the user memory)
>
> [ v4: make kmem files part of the main array;
> do not allow limit to be set for non-empty cgroups ]
> [ v5: cosmetic changes ]
>
> Signed-off-by: Glauber Costa <glommer@parallels.com>
> Acked-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
> CC: Michal Hocko <mhocko@suse.cz>
> CC: Johannes Weiner <hannes@cmpxchg.org>
> CC: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
> ---
> mm/memcontrol.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 115 insertions(+), 1 deletion(-)
>
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index 71d259e..30eafeb 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -266,6 +266,10 @@ struct mem_cgroup {
> };
>
> /*
> + * the counter to account for kernel memory usage.
> + */
> + struct res_counter kmem;
> + /*
> * Per cgroup active and inactive list, similar to the
> * per zone LRU lists.
> */
> @@ -280,6 +284,7 @@ struct mem_cgroup {
> * Should the accounting and control be hierarchical, per subtree?
> */
> bool use_hierarchy;
> + unsigned long kmem_accounted; /* See KMEM_ACCOUNTED_*, below */
>
> bool oom_lock;
> atomic_t under_oom;
> @@ -332,6 +337,20 @@ struct mem_cgroup {
> #endif
> };
>
> +/* internal only representation about the status of kmem accounting. */
> +enum {
> + KMEM_ACCOUNTED_ACTIVE = 0, /* accounted by this cgroup itself */
> +};
> +
> +#define KMEM_ACCOUNTED_MASK (1 << KMEM_ACCOUNTED_ACTIVE)
> +
> +#ifdef CONFIG_MEMCG_KMEM
> +static void memcg_kmem_set_active(struct mem_cgroup *memcg)
> +{
> + set_bit(KMEM_ACCOUNTED_ACTIVE, &memcg->kmem_accounted);
> +}
> +#endif
> +
> /* Stuffs for move charges at task migration. */
> /*
> * Types of charges to be moved. "move_charge_at_immitgrate" is treated as a
> @@ -390,6 +409,7 @@ enum res_type {
> _MEM,
> _MEMSWAP,
> _OOM_TYPE,
> + _KMEM,
> };
>
> #define MEMFILE_PRIVATE(x, val) ((x) << 16 | (val))
> @@ -1433,6 +1453,10 @@ done:
> res_counter_read_u64(&memcg->memsw, RES_USAGE) >> 10,
> res_counter_read_u64(&memcg->memsw, RES_LIMIT) >> 10,
> res_counter_read_u64(&memcg->memsw, RES_FAILCNT));
> + printk(KERN_INFO "kmem: usage %llukB, limit %llukB, failcnt %llu\n",
> + res_counter_read_u64(&memcg->kmem, RES_USAGE) >> 10,
> + res_counter_read_u64(&memcg->kmem, RES_LIMIT) >> 10,
> + res_counter_read_u64(&memcg->kmem, RES_FAILCNT));
> }
>
> /*
> @@ -3940,6 +3964,9 @@ static ssize_t mem_cgroup_read(struct cgroup *cont, struct cftype *cft,
> else
> val = res_counter_read_u64(&memcg->memsw, name);
> break;
> + case _KMEM:
> + val = res_counter_read_u64(&memcg->kmem, name);
> + break;
> default:
> BUG();
> }
> @@ -3947,6 +3974,57 @@ static ssize_t mem_cgroup_read(struct cgroup *cont, struct cftype *cft,
> len = scnprintf(str, sizeof(str), "%llu\n", (unsigned long long)val);
> return simple_read_from_buffer(buf, nbytes, ppos, str, len);
> }
> +
> +static int memcg_update_kmem_limit(struct cgroup *cont, u64 val)
> +{
> + int ret = -EINVAL;
> +#ifdef CONFIG_MEMCG_KMEM
> + struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
> + /*
> + * For simplicity, we won't allow this to be disabled. It also can't
> + * be changed if the cgroup has children already, or if tasks had
> + * already joined.
> + *
> + * If tasks join before we set the limit, a person looking at
> + * kmem.usage_in_bytes will have no way to determine when it took
> + * place, which makes the value quite meaningless.
> + *
> + * After it first became limited, changes in the value of the limit are
> + * of course permitted.
> + *
> + * Taking the cgroup_lock is really offensive, but it is so far the only
> + * way to guarantee that no children will appear. There are plenty of
> + * other offenders, and they should all go away. Fine grained locking
> + * is probably the way to go here. When we are fully hierarchical, we
> + * can also get rid of the use_hierarchy check.
> + */
> + cgroup_lock();
> + mutex_lock(&set_limit_mutex);
> + if (!memcg->kmem_accounted && val != RESOURCE_MAX) {
> + if (cgroup_task_count(cont) || (memcg->use_hierarchy &&
> + !list_empty(&cont->children))) {
> + ret = -EBUSY;
> + goto out;
> + }
> + ret = res_counter_set_limit(&memcg->kmem, val);
> + VM_BUG_ON(ret);
> +
> + memcg_kmem_set_active(memcg);
> + } else
> + ret = res_counter_set_limit(&memcg->kmem, val);
> +out:
> + mutex_unlock(&set_limit_mutex);
> + cgroup_unlock();
> +#endif
> + return ret;
> +}
> +
> +static void memcg_propagate_kmem(struct mem_cgroup *memcg,
> + struct mem_cgroup *parent)
> +{
> + memcg->kmem_accounted = parent->kmem_accounted;
> +}
> +
> /*
> * The user of this function is...
> * RES_LIMIT.
> @@ -3978,8 +4056,12 @@ static int mem_cgroup_write(struct cgroup *cont, struct cftype *cft,
> break;
> if (type == _MEM)
> ret = mem_cgroup_resize_limit(memcg, val);
> - else
> + else if (type == _MEMSWAP)
> ret = mem_cgroup_resize_memsw_limit(memcg, val);
> + else if (type == _KMEM)
> + ret = memcg_update_kmem_limit(cont, val);
> + else
> + return -EINVAL;
> break;
> case RES_SOFT_LIMIT:
> ret = res_counter_memparse_write_strategy(buffer, &val);
> @@ -4045,12 +4127,16 @@ static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
> case RES_MAX_USAGE:
> if (type == _MEM)
> res_counter_reset_max(&memcg->res);
> + else if (type == _KMEM)
> + res_counter_reset_max(&memcg->kmem);
> else
> res_counter_reset_max(&memcg->memsw);
> break;
> case RES_FAILCNT:
> if (type == _MEM)
> res_counter_reset_failcnt(&memcg->res);
> + else if (type == _KMEM)
> + res_counter_reset_failcnt(&memcg->kmem);
> else
> res_counter_reset_failcnt(&memcg->memsw);
> break;
> @@ -4728,6 +4814,31 @@ static struct cftype mem_cgroup_files[] = {
> .read = mem_cgroup_read,
> },
> #endif
> +#ifdef CONFIG_MEMCG_KMEM
> + {
> + .name = "kmem.limit_in_bytes",
> + .private = MEMFILE_PRIVATE(_KMEM, RES_LIMIT),
> + .write_string = mem_cgroup_write,
> + .read = mem_cgroup_read,
> + },
> + {
> + .name = "kmem.usage_in_bytes",
> + .private = MEMFILE_PRIVATE(_KMEM, RES_USAGE),
> + .read = mem_cgroup_read,
> + },
> + {
> + .name = "kmem.failcnt",
> + .private = MEMFILE_PRIVATE(_KMEM, RES_FAILCNT),
> + .trigger = mem_cgroup_reset,
> + .read = mem_cgroup_read,
> + },
> + {
> + .name = "kmem.max_usage_in_bytes",
> + .private = MEMFILE_PRIVATE(_KMEM, RES_MAX_USAGE),
> + .trigger = mem_cgroup_reset,
> + .read = mem_cgroup_read,
> + },
> +#endif
> { }, /* terminate */
> };
>
> @@ -4973,6 +5084,7 @@ mem_cgroup_create(struct cgroup *cont)
> if (parent && parent->use_hierarchy) {
> res_counter_init(&memcg->res, &parent->res);
> res_counter_init(&memcg->memsw, &parent->memsw);
> + res_counter_init(&memcg->kmem, &parent->kmem);
> /*
> * We increment refcnt of the parent to ensure that we can
> * safely access it on res_counter_charge/uncharge.
> @@ -4980,9 +5092,11 @@ mem_cgroup_create(struct cgroup *cont)
> * mem_cgroup(see mem_cgroup_put).
> */
> mem_cgroup_get(parent);
> + memcg_propagate_kmem(memcg, parent);
> } else {
> res_counter_init(&memcg->res, NULL);
> res_counter_init(&memcg->memsw, NULL);
> + res_counter_init(&memcg->kmem, NULL);
> /*
> * Deeper hierachy with use_hierarchy == false doesn't make
> * much sense so let cgroup subsystem know about this
> --
> 1.7.11.7
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-10-16 12:15 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-16 10:16 [PATCH v5 00/14] kmem controller for memcg Glauber Costa
2012-10-16 10:16 ` [PATCH v5 01/14] memcg: Make it possible to use the stock for more than one page Glauber Costa
2012-10-17 22:11 ` Andrew Morton
2012-10-18 16:54 ` Glauber Costa
2012-10-16 10:16 ` [PATCH v5 02/14] memcg: Reclaim when more than one page needed Glauber Costa
2012-10-17 21:46 ` David Rientjes
2012-10-16 10:16 ` [PATCH v5 03/14] memcg: change defines to an enum Glauber Costa
2012-10-17 21:50 ` David Rientjes
2012-10-16 10:16 ` [PATCH v5 04/14] kmem accounting basic infrastructure Glauber Costa
2012-10-16 12:14 ` Michal Hocko [this message]
2012-10-17 22:08 ` David Rientjes
2012-10-18 17:01 ` Glauber Costa
2012-10-18 19:47 ` Tejun Heo
2012-10-18 19:37 ` Tejun Heo
2012-10-17 22:12 ` Andrew Morton
2012-10-18 17:03 ` Glauber Costa
2012-10-16 10:16 ` [PATCH v5 05/14] Add a __GFP_KMEMCG flag Glauber Costa
2012-10-16 12:15 ` Michal Hocko
2012-10-17 22:09 ` David Rientjes
2012-10-16 10:16 ` [PATCH v5 06/14] memcg: kmem controller infrastructure Glauber Costa
2012-10-17 6:40 ` Kamezawa Hiroyuki
2012-10-17 22:12 ` Andrew Morton
2012-10-18 9:16 ` Glauber Costa
2012-10-18 22:06 ` David Rientjes
2012-10-19 9:10 ` Glauber Costa
2012-10-19 9:31 ` David Rientjes
2012-10-19 10:00 ` Glauber Costa
2012-10-17 22:37 ` David Rientjes
2012-10-18 9:23 ` Glauber Costa
2012-10-18 21:59 ` David Rientjes
2012-10-19 10:08 ` Glauber Costa
2012-10-19 20:34 ` David Rientjes
2012-10-22 12:34 ` Glauber Costa
2012-10-22 12:51 ` Michal Hocko
2012-10-22 12:52 ` Glauber Costa
2012-10-16 10:16 ` [PATCH v5 07/14] mm: Allocate kernel pages to the right memcg Glauber Costa
2012-10-16 15:31 ` Christoph Lameter
2012-10-16 18:55 ` Glauber Costa
2012-10-17 22:12 ` Andrew Morton
2012-10-18 9:24 ` Glauber Costa
2012-10-18 20:44 ` Andrew Morton
2012-10-18 11:53 ` Glauber Costa
2012-10-17 22:43 ` David Rientjes
2012-10-16 10:16 ` [PATCH v5 08/14] res_counter: return amount of charges after res_counter_uncharge Glauber Costa
2012-10-17 23:23 ` David Rientjes
2012-10-16 10:16 ` [PATCH v5 09/14] memcg: kmem accounting lifecycle management Glauber Costa
2012-10-17 23:28 ` David Rientjes
2012-10-18 6:14 ` Michal Hocko
2012-10-18 9:42 ` Glauber Costa
2012-10-16 10:16 ` [PATCH v5 10/14] memcg: use static branches when code not in use Glauber Costa
2012-10-16 10:16 ` [PATCH v5 11/14] memcg: allow a memcg with kmem charges to be destructed Glauber Costa
2012-10-17 22:12 ` Andrew Morton
2012-10-18 9:33 ` Glauber Costa
2012-10-16 10:16 ` [PATCH v5 12/14] execute the whole memcg freeing in free_worker Glauber Costa
2012-10-17 6:56 ` Kamezawa Hiroyuki
2012-10-16 10:16 ` [PATCH v5 13/14] protect architectures where THREAD_SIZE >= PAGE_SIZE against fork bombs Glauber Costa
2012-10-17 22:12 ` Andrew Morton
2012-10-18 9:37 ` Glauber Costa
2012-10-16 10:16 ` [PATCH v5 14/14] Add documentation about the kmem controller Glauber Costa
2012-10-16 12:23 ` Michal Hocko
2012-10-16 18:25 ` Christoph Lameter
2012-10-16 18:55 ` Aristeu Rozanski
2012-10-16 19:02 ` Glauber Costa
2012-10-16 19:30 ` Christoph Lameter
2012-10-17 22:12 ` Andrew Morton
2012-10-18 9:38 ` Glauber Costa
2012-10-17 22:11 ` [PATCH v5 00/14] kmem controller for memcg Andrew Morton
2012-10-18 16:51 ` Glauber Costa
2012-10-18 19:21 ` Andrew Morton
2012-10-19 9:55 ` Glauber Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121016121458.GE13991@dhcp22.suse.cz \
--to=mhocko@suse.cz \
--cc=akpm@linux-foundation.org \
--cc=cgroups@vger.kernel.org \
--cc=cl@linux.com \
--cc=devel@openvz.org \
--cc=glommer@parallels.com \
--cc=hannes@cmpxchg.org \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=penberg@kernel.org \
--cc=rientjes@google.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox