linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Leon Woestenberg <leon.woestenberg@gmail.com>
Cc: linux-pci@vger.kernel.org, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org
Subject: Re: mmap() implementation for pci_alloc_consistent() memory?
Date: Thu, 19 May 2011 10:59:21 -0400	[thread overview]
Message-ID: <20110519145921.GE9854@dumpdata.com> (raw)
In-Reply-To: <BANLkTi==cinS1bZc_ARRbnYT3YD+FQr8gA@mail.gmail.com>

On Thu, May 19, 2011 at 12:14:40AM +0200, Leon Woestenberg wrote:
> Hello,
> 
> I cannot get my driver's mmap() to work. I allocate 64 KiB ringbuffer
> using pci_alloc_consistent(), then implement mmap() to allow programs
> to map that memory into their user space.
> 
> My driver writes 0xDEADBEEF into the first 32-bit word of the memory
> block. When I dump this word from my mmap.c program, it reads 0. It
> seems a zero-page got mapped rather than the buffer.
> 
> This is the code, Ieft out all error checking but inserted comments to
> show what I have verified.
> 
> int main(void)
> {
>   int fd = open("/device_node", O_RDWR | O_SYNC);
>   uint32_t *addr = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
>   uint32_t data = *addr;
>   printf("address 0x%p reads data 0x%08x\n", addr32, (unsigned int)data);
>   munmap(addr, 4096);
>   close(fd);
> }
> 
> 
> void ringbuffer_vma_open(struct vm_area_struct *vma)
> {
> }
> 
> void ringbuffer_vma_close(struct vm_area_struct *vma)
> {
> }
> 
> int ringbuffer_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
> {
>         /* the buffer allocated with pci_alloc_consistent() */
> 	void *vaddr = ringbuffer_virt;
> 	int ret;
> 
> 	/* find the struct page that describes vaddr, the buffer
> 	 * allocated with pci_alloc_consistent() */
> 	struct page *page = virt_to_page(lro_char->engine->ringbuffer_virt);
> 	vmf->page = page;
> 
>         /*** I have verified that vaddr, page, and the pfn correspond
> with vaddr = pci_alloc_consistent() ***/
> 	ret = vm_insert_pfn(vma, address, page_to_pfn(page));

address is the vmf->virtual_address?

And is the page_to_pfn(page) value correct? As in:

  int pfn = page_to_pfn(page);

  WARN(pfn << PAGE_SIZE != vaddr,"Something fishy.");

Hm, I think I might have misled you now that I look at that WARN.

The pfn to be supplied has to be physical page frame number. Which in
this case should be your bus addr shifted by PAGE_SIZE. Duh! Try that
value.

I think a better example might be the 'hpet_mmap' code as it is simpler
and it also adds the VM_IO flag.

> 	return ret;
> }
> 
> static const struct vm_operations_struct ringbuffer_vm_ops = {
> 	.fault          = ringbuffer_vma_fault,
> };
> 
> static int ringbuffer_mmap(struct file *file, struct vm_area_struct *vma)
> {
>         <...extract private data...>
> 
> 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
> 
> 	vma->vm_flags |= VM_RESERVED | VM_MIXEDMAP;
> 	vma->vm_private_data = file->private_data;
> 	vma->vm_ops = &ringbuffer_vm_ops;
> 	ringbuffer_vma_open(vma);
> 	return 0;
> }
> 
> What did I miss?

I gave you the wrong data :-(

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2011-05-19 14:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-18 22:14 Leon Woestenberg
2011-05-19  1:04 ` Leon Woestenberg
2011-05-19 14:59 ` Konrad Rzeszutek Wilk [this message]
2011-05-19 15:58   ` Clemens Ladisch
2011-05-19 22:10     ` Leon Woestenberg
2011-05-20  6:51       ` Clemens Ladisch
2011-05-20  8:17         ` Takashi Iwai
2011-05-21 10:59           ` Leon Woestenberg
2011-05-23  8:30             ` Clemens Ladisch
2011-05-24 14:18               ` Leon Woestenberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110519145921.GE9854@dumpdata.com \
    --to=konrad.wilk@oracle.com \
    --cc=leon.woestenberg@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox