linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Michal Hocko <mhocko@suse.cz>
To: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>,
	Andrew Morton <akpm@linux-foundation.org>,
	linux-mm@kvack.org, LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] memcg: consider per-cpu stock reserves when returning RES_USAGE for _MEM
Date: Mon, 21 Mar 2011 11:24:20 +0100	[thread overview]
Message-ID: <20110321102420.GB26047@tiehlicka.suse.cz> (raw)
In-Reply-To: <20110321093419.GA26047@tiehlicka.suse.cz>

[Sorry for reposting but I forgot to fully refresh the patch before
posting...]

On Mon 21-03-11 10:34:19, Michal Hocko wrote:
> On Fri 18-03-11 16:25:32, Michal Hocko wrote:
> [...]
> > According to our documention this is a reasonable test case:
> > Documentation/cgroups/memory.txt:
> > memory.usage_in_bytes           # show current memory(RSS+Cache) usage.
> > 
> > This however doesn't work after your commit:
> > cdec2e4265d (memcg: coalesce charging via percpu storage)
> > 
> > because since then we are charging in bulks so we can end up with
> > rss+cache <= usage_in_bytes.
> [...]
> > I think we have several options here
> > 	1) document that the value is actually >= rss+cache and it shows
> > 	   the guaranteed charges for the group
> > 	2) use rss+cache rather then res->count
> > 	3) remove the file
> > 	4) call drain_all_stock_sync before asking for the value in
> > 	   mem_cgroup_read
> > 	5) collect the current amount of stock charges and subtract it
> > 	   from the current res->count value
> > 
> > 1) and 2) would suggest that the file is actually not very much useful.
> > 3) is basically the interface change as well
> > 4) sounds little bit invasive as we basically lose the advantage of the
> > pool whenever somebody reads the file. Btw. for who is this file
> > intended?
> > 5) sounds like a compromise
> 
> I guess that 4) is really too invasive - for no good reason so here we
> go with the 5) solution.
--- 
From: Michal Hocko <mhocko@suse.cz>
Subject: memcg: consider per-cpu stock reserves when returning RES_USAGE for _MEM

Since cdec2e4265d (memcg: coalesce charging via percpu storage) commit we
are charging resource counter in batches. This means that the current
res->count value doesn't show the real consumed value (rss+cache as we
describe in the documentation) but rather a promissed charges for future.
We are pre-charging CHARGE_SIZE bulk at once and subsequent charges are
satisfied from the per-cpu cgroup_stock pool.

We have seen a report that one of the LTP testcases checks exactly this
condition so the test fails.

As this exported value is a part of kernel->userspace interface we should
try to preserve the original (and documented) semantic.

This patch fixes the issue by collecting the current usage of each per-cpu
stock and subtracting it from the current res counter value.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Index: linus_tree/mm/memcontrol.c
===================================================================
--- linus_tree.orig/mm/memcontrol.c	2011-03-18 16:09:11.000000000 +0100
+++ linus_tree/mm/memcontrol.c	2011-03-21 10:21:55.000000000 +0100
@@ -3579,13 +3579,30 @@ static unsigned long mem_cgroup_recursiv
 	return val;
 }
 
+static u64 mem_cgroup_current_usage(struct mem_cgroup *mem)
+{
+	u64 val = res_counter_read_u64(&mem->res, RES_USAGE);
+	u64 per_cpu_val = 0;
+	int cpu;
+
+	get_online_cpus();
+	for_each_online_cpu(cpu) {
+		struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
+
+		per_cpu_val += stock->nr_pages * PAGE_SIZE;
+	}
+	put_online_cpus();
+
+	return (val > per_cpu_val)? val - per_cpu_val: 0;
+}
+
 static inline u64 mem_cgroup_usage(struct mem_cgroup *mem, bool swap)
 {
 	u64 val;
 
 	if (!mem_cgroup_is_root(mem)) {
 		if (!swap)
-			return res_counter_read_u64(&mem->res, RES_USAGE);
+			return mem_cgroup_current_usage(mem);
 		else
 			return res_counter_read_u64(&mem->memsw, RES_USAGE);
 	}
-- 
Michal Hocko
SUSE Labs
SUSE LINUX s.r.o.
Lihovarska 1060/12
190 00 Praha 9    
Czech Republic

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2011-03-21 10:24 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-18 15:25 cgroup: real meaning of memory.usage_in_bytes Michal Hocko
2011-03-18 15:29 ` Michal Hocko
2011-03-21  9:34 ` Michal Hocko
2011-03-21 10:24   ` Michal Hocko [this message]
2011-03-22  0:10     ` [PATCH] memcg: consider per-cpu stock reserves when returning RES_USAGE for _MEM KAMEZAWA Hiroyuki
2011-03-22  1:47       ` Daisuke Nishimura
2011-03-22  7:31         ` Michal Hocko
2011-03-23  0:27           ` Daisuke Nishimura
2011-03-23  4:35             ` KAMEZAWA Hiroyuki
2011-03-27 23:55               ` Daisuke Nishimura
2011-03-28  4:25                 ` [PATCH] memcg: update documentation to describe usage_in_bytes Daisuke Nishimura
2011-03-28  7:43                   ` Michal Hocko
2011-03-28  9:11                     ` KAMEZAWA Hiroyuki
2011-03-28  9:48                       ` Michal Hocko
2011-03-28 10:31                         ` KAMEZAWA Hiroyuki
2011-03-29  1:15                           ` [PATCH v2] " Daisuke Nishimura
2011-03-29  1:24                             ` KAMEZAWA Hiroyuki
2011-03-29  7:21                             ` Michal Hocko
2011-04-19 12:14                               ` Michal Hocko
2011-04-19 23:24                                 ` Daisuke Nishimura
2011-03-21 17:22   ` cgroup: real meaning of memory.usage_in_bytes Ying Han
2011-03-22  7:35     ` Michal Hocko
2011-03-22 17:06       ` Ying Han
2011-03-23 14:26         ` Michal Hocko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110321102420.GB26047@tiehlicka.suse.cz \
    --to=mhocko@suse.cz \
    --cc=akpm@linux-foundation.org \
    --cc=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=nishimura@mxp.nes.nec.co.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox