* [PATCH R4 2/7] xen/balloon: HVM mode support
@ 2011-03-08 21:46 Daniel Kiper
2011-03-09 13:58 ` Stefano Stabellini
0 siblings, 1 reply; 3+ messages in thread
From: Daniel Kiper @ 2011-03-08 21:46 UTC (permalink / raw)
To: ian.campbell, akpm, andi.kleen, haicheng.li, fengguang.wu,
jeremy, konrad.wilk, dan.magenheimer, v.tolstov, pasik, dave,
wdauchy, rientjes, xen-devel, linux-kernel, linux-mm
HVM mode support.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
---
drivers/xen/balloon.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index b4206fd..952cfe2 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -227,7 +227,7 @@ static int increase_reservation(unsigned long nr_pages)
set_phys_to_machine(pfn, frame_list[i]);
/* Link back into the page tables if not highmem. */
- if (pfn < max_low_pfn) {
+ if (xen_pv_domain() && !PageHighMem(page)) {
int ret;
ret = HYPERVISOR_update_va_mapping(
(unsigned long)__va(pfn << PAGE_SHIFT),
@@ -275,7 +275,7 @@ static int decrease_reservation(unsigned long nr_pages)
scrub_page(page);
- if (!PageHighMem(page)) {
+ if (xen_pv_domain() && !PageHighMem(page)) {
ret = HYPERVISOR_update_va_mapping(
(unsigned long)__va(pfn << PAGE_SHIFT),
__pte_ma(0), 0);
@@ -390,12 +390,12 @@ static int __init balloon_init(void)
unsigned long pfn, extra_pfn_end;
struct page *page;
- if (!xen_pv_domain())
+ if (!xen_domain())
return -ENODEV;
pr_info("xen_balloon: Initialising balloon driver.\n");
- balloon_stats.current_pages = min(xen_start_info->nr_pages, max_pfn);
+ balloon_stats.current_pages = xen_pv_domain() ? min(xen_start_info->nr_pages, max_pfn) : max_pfn;
balloon_stats.target_pages = balloon_stats.current_pages;
balloon_stats.balloon_low = 0;
balloon_stats.balloon_high = 0;
--
1.5.6.5
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH R4 2/7] xen/balloon: HVM mode support
2011-03-08 21:46 [PATCH R4 2/7] xen/balloon: HVM mode support Daniel Kiper
@ 2011-03-09 13:58 ` Stefano Stabellini
2011-03-15 14:18 ` Daniel Kiper
0 siblings, 1 reply; 3+ messages in thread
From: Stefano Stabellini @ 2011-03-09 13:58 UTC (permalink / raw)
To: Daniel Kiper
Cc: Ian Campbell, akpm, andi.kleen, haicheng.li, fengguang.wu,
jeremy, konrad.wilk, Dan Magenheimer, v.tolstov, pasik, dave,
wdauchy, rientjes, xen-devel, linux-kernel, linux-mm
On Tue, 8 Mar 2011, Daniel Kiper wrote:
> HVM mode support.
I have already a patch in linux-next to do this, please give a look at
"xen: make the ballon driver work for hvm domains":
git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git linux-next
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH R4 2/7] xen/balloon: HVM mode support
2011-03-09 13:58 ` Stefano Stabellini
@ 2011-03-15 14:18 ` Daniel Kiper
0 siblings, 0 replies; 3+ messages in thread
From: Daniel Kiper @ 2011-03-15 14:18 UTC (permalink / raw)
To: Stefano Stabellini
Cc: Daniel Kiper, Ian Campbell, akpm, andi.kleen, haicheng.li,
fengguang.wu, jeremy, konrad.wilk, Dan Magenheimer, v.tolstov,
pasik, dave, wdauchy, rientjes, xen-devel, linux-kernel,
linux-mm
On Wed, Mar 09, 2011 at 01:58:30PM +0000, Stefano Stabellini wrote:
> On Tue, 8 Mar 2011, Daniel Kiper wrote:
> > HVM mode support.
>
> I have already a patch in linux-next to do this, please give a look at
> "xen: make the ballon driver work for hvm domains":
>
> git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git linux-next
OK, I will remove this patch from memory hotplug patchset, however:
@@ -232,7 +232,7 @@ static int increase_reservation(unsigned long nr_pages)
set_phys_to_machine(pfn, frame_list[i]);
/* Link back into the page tables if not highmem. */
- if (pfn < max_low_pfn) {
+ if (!xen_hvm_domain() && pfn < max_low_pfn) {
Why do not write it as:
if (xen_pv_domain() && !PageHighMem(page)) ...
For me it is simpler to read (xen_pv_domain()) and make it similar
to relevant part in decrease_reservation() (!PageHighMem(page)).
@@ -280,7 +280,7 @@ static int decrease_reservation(unsigned long nr_pages)
scrub_page(page);
- if (!PageHighMem(page)) {
+ if (!xen_hvm_domain() && !PageHighMem(page)) {
As above.
@@ -392,15 +392,19 @@ static struct notifier_block xenstore_notifier;
static int __init balloon_init(void)
{
- unsigned long pfn, extra_pfn_end;
+ unsigned long pfn, nr_pages, extra_pfn_end;
struct page *page;
- if (!xen_pv_domain())
+ if (!xen_domain())
return -ENODEV;
pr_info("xen_balloon: Initialising balloon driver.\n");
- balloon_stats.current_pages = min(xen_start_info->nr_pages, max_pfn);
+ if (xen_pv_domain())
+ nr_pages = xen_start_info->nr_pages;
+ else
+ nr_pages = max_pfn;
+ balloon_stats.current_pages = min(nr_pages, max_pfn);
It could be simplified:
balloon_stats.current_pages = xen_pv_domain() ? min(xen_start_info->nr_pages, max_pfn) : max_pfn;
Daniel
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-03-15 14:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-03-08 21:46 [PATCH R4 2/7] xen/balloon: HVM mode support Daniel Kiper
2011-03-09 13:58 ` Stefano Stabellini
2011-03-15 14:18 ` Daniel Kiper
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox