From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
To: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jesper Juhl <jj@chaosbits.net>, Mel Gorman <mel@csn.ul.ie>,
LKML <linux-kernel@vger.kernel.org>,
linux-mm <linux-mm@kvack.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH] cleanup kswapd()
Date: Mon, 15 Nov 2010 10:37:20 +0900 (JST) [thread overview]
Message-ID: <20101115103623.BF03.A69D9226@jp.fujitsu.com> (raw)
In-Reply-To: <20101115092712.BEF4.A69D9226@jp.fujitsu.com>
> Right. thank you.
> I'll respin.
Done.
From a29f0f5b780170fc26eb9210df03ed974aad8362 Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Fri, 3 Dec 2010 10:48:41 +0900
Subject: [PATCH] factor out kswapd sleeping logic from kswapd()
Currently, kswapd() function has deeper nest and it slightly harder to
read. cleanup it.
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
---
mm/vmscan.c | 71 +++++++++++++++++++++++++++++++---------------------------
1 files changed, 38 insertions(+), 33 deletions(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 8cc90d5..3ee33a8 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2364,6 +2364,42 @@ out:
return sc.nr_reclaimed;
}
+static void kswapd_try_to_sleep(pg_data_t *pgdat, int order)
+{
+ long remaining = 0;
+ DEFINE_WAIT(wait);
+
+ if (freezing(current) || kthread_should_stop())
+ return;
+
+ prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
+
+ /* Try to sleep for a short interval */
+ if (!sleeping_prematurely(pgdat, order, remaining)) {
+ remaining = schedule_timeout(HZ/10);
+ finish_wait(&pgdat->kswapd_wait, &wait);
+ prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
+ }
+
+ /*
+ * After a short sleep, check if it was a
+ * premature sleep. If not, then go fully
+ * to sleep until explicitly woken up
+ */
+ if (!sleeping_prematurely(pgdat, order, remaining)) {
+ trace_mm_vmscan_kswapd_sleep(pgdat->node_id);
+ set_pgdat_percpu_threshold(pgdat, calculate_normal_threshold);
+ schedule();
+ set_pgdat_percpu_threshold(pgdat, calculate_pressure_threshold);
+ } else {
+ if (remaining)
+ count_vm_event(KSWAPD_LOW_WMARK_HIT_QUICKLY);
+ else
+ count_vm_event(KSWAPD_HIGH_WMARK_HIT_QUICKLY);
+ }
+ finish_wait(&pgdat->kswapd_wait, &wait);
+}
+
/*
* The background pageout daemon, started as a kernel thread
* from the init process.
@@ -2382,7 +2418,7 @@ static int kswapd(void *p)
unsigned long order;
pg_data_t *pgdat = (pg_data_t*)p;
struct task_struct *tsk = current;
- DEFINE_WAIT(wait);
+
struct reclaim_state reclaim_state = {
.reclaimed_slab = 0,
};
@@ -2414,7 +2450,6 @@ static int kswapd(void *p)
unsigned long new_order;
int ret;
- prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
new_order = pgdat->kswapd_max_order;
pgdat->kswapd_max_order = 0;
if (order < new_order) {
@@ -2424,39 +2459,9 @@ static int kswapd(void *p)
*/
order = new_order;
} else {
- if (!freezing(current) && !kthread_should_stop()) {
- long remaining = 0;
-
- /* Try to sleep for a short interval */
- if (!sleeping_prematurely(pgdat, order, remaining)) {
- remaining = schedule_timeout(HZ/10);
- finish_wait(&pgdat->kswapd_wait, &wait);
- prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
- }
-
- /*
- * After a short sleep, check if it was a
- * premature sleep. If not, then go fully
- * to sleep until explicitly woken up
- */
- if (!sleeping_prematurely(pgdat, order, remaining)) {
- trace_mm_vmscan_kswapd_sleep(pgdat->node_id);
- set_pgdat_percpu_threshold(pgdat,
- calculate_normal_threshold);
- schedule();
- set_pgdat_percpu_threshold(pgdat,
- calculate_pressure_threshold);
- } else {
- if (remaining)
- count_vm_event(KSWAPD_LOW_WMARK_HIT_QUICKLY);
- else
- count_vm_event(KSWAPD_HIGH_WMARK_HIT_QUICKLY);
- }
- }
-
+ kswapd_try_to_sleep(pgdat, order);
order = pgdat->kswapd_max_order;
}
- finish_wait(&pgdat->kswapd_wait, &wait);
ret = try_to_freeze();
if (kthread_should_stop())
--
1.6.5.2
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom policy in Canada: sign http://dissolvethecrtc.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2010-11-15 1:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-14 9:05 KOSAKI Motohiro
2010-11-14 11:03 ` Jesper Juhl
2010-11-15 0:27 ` KOSAKI Motohiro
2010-11-15 1:37 ` KOSAKI Motohiro [this message]
2010-11-15 9:42 ` Mel Gorman
2010-11-16 6:07 ` [PATCH v3] factor out kswapd sleeping logic from kswapd() KOSAKI Motohiro
2010-11-18 17:27 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101115103623.BF03.A69D9226@jp.fujitsu.com \
--to=kosaki.motohiro@jp.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=jj@chaosbits.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mel@csn.ul.ie \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox