linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
To: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	linux@arm.linux.org.uk, Yinghai Lu <yinghai@kernel.org>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Shaohua Li <shaohua.li@intel.com>,
	Yakui Zhao <yakui.zhao@intel.com>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	arm-kernel@lists.infradead.org, kgene.kim@samsung.com,
	Mel Gorman <mel@csn.ul.ie>
Subject: Re: [RFC] Tight check of pfn_valid on sparsemem
Date: Wed, 14 Jul 2010 09:23:01 +0900	[thread overview]
Message-ID: <20100714092301.69e7e628.kamezawa.hiroyu@jp.fujitsu.com> (raw)
In-Reply-To: <20100713164423.GC2815@barrios-desktop>

On Wed, 14 Jul 2010 01:44:23 +0900
Minchan Kim <minchan.kim@gmail.com> wrote:
 
> > If you _really_ can't make the section size smaller, and the vast
> > majority of the sections are fully populated, you could hack something
> > in.  We could, for instance, have a global list that's mostly readonly
> > which tells you which sections need to be have their sizes closely
> > inspected.  That would work OK if, for instance, you only needed to
> > check a couple of memory sections in the system.  It'll start to suck if
> > you made the lists very long.
> 
> Thanks for advise. As I say, I hope Russell accept 16M section. 
> 

It seems what I needed was good sleep....
How about this if 16M section is not acceptable ?

== NOT TESTED AT ALL, EVEN NOT COMPILED ==

register address of mem_section to memmap itself's page struct's pg->private field.
This means the page is used for memmap of the section.
Otherwise, the page is used for other purpose and memmap has a hole.

---
 arch/arm/mm/init.c     |   11 ++++++++++-
 include/linux/mmzone.h |   19 ++++++++++++++++++-
 mm/sparse.c            |   37 +++++++++++++++++++++++++++++++++++++
 3 files changed, 65 insertions(+), 2 deletions(-)

Index: mmotm-2.6.35-0701/include/linux/mmzone.h
===================================================================
--- mmotm-2.6.35-0701.orig/include/linux/mmzone.h
+++ mmotm-2.6.35-0701/include/linux/mmzone.h
@@ -1047,11 +1047,28 @@ static inline struct mem_section *__pfn_
 	return __nr_to_section(pfn_to_section_nr(pfn));
 }
 
+#ifdef CONFIG_SPARSEMEM_HAS_PIT
+void mark_memmap_pit(unsigned long start, unsigned long end, bool valid);
+static inline int page_valid(struct mem_section *ms, unsigned long pfn)
+{
+	struct page *page = pfn_to_page(pfn);
+	struct page *__pg = virt_to_page(page);
+	return __pg->private == ms;
+}
+#else
+static inline int page_valid(struct mem_section *ms, unsigned long pfn)
+{
+	return 1;
+}
+#endif
+
 static inline int pfn_valid(unsigned long pfn)
 {
+	struct mem_section *ms;
 	if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
 		return 0;
-	return valid_section(__nr_to_section(pfn_to_section_nr(pfn)));
+	ms = __nr_to_section(pfn_to_section_nr(pfn));
+	return valid_section(ms) && page_valid(ms, pfn);
 }
 
 static inline int pfn_present(unsigned long pfn)
Index: mmotm-2.6.35-0701/mm/sparse.c
===================================================================
--- mmotm-2.6.35-0701.orig/mm/sparse.c
+++ mmotm-2.6.35-0701/mm/sparse.c
@@ -615,6 +615,43 @@ void __init sparse_init(void)
 	free_bootmem(__pa(usemap_map), size);
 }
 
+#ifdef CONFIT_SPARSEMEM_HAS_PIT
+/*
+ * Fill memmap's pg->private with a pointer to mem_section.
+ * pfn_valid() will check this later. (see include/linux/mmzone.h)
+ * The caller should call 
+ * 	mark_memmap_pit(start, end, true) # for all allocated mem_map
+ * 	and, after that,
+ * 	mark_memmap_pit(start, end, false) # for all pits in mem_map.
+ * please see usage in ARM.
+ */
+void mark_memmap_pit(unsigned long start, unsigned long end, bool valid)
+{
+	struct mem_section *ms;
+	unsigned long pos, next;
+	struct page *pg;
+	void *memmap, *end;
+	unsigned long mapsize = sizeof(struct page) * PAGES_PER_SECTION;
+
+	for (pos = start;
+	     pos < end; pos = next) {
+		next = (pos + PAGES_PER_SECTION) & PAGE_SECTION_MASK;
+		ms = __pfn_to_section(pos);
+		if (!valid_section(ms))
+			continue;
+		for (memmap = pfn_to_page(pfn), end = pfn_to_page(next-1);
+		     memmap != end + 1;
+		     memmap += PAGE_SIZE) {
+			pg = virt_to_page(memmap);
+			if (valid)
+				pg->private = ms;
+			else
+				pg->private = NULL;
+		}
+	}
+}
+#endif
+
 #ifdef CONFIG_MEMORY_HOTPLUG
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 static inline struct page *kmalloc_section_memmap(unsigned long pnum, int nid,
Index: mmotm-2.6.35-0701/arch/arm/mm/init.c
===================================================================
--- mmotm-2.6.35-0701.orig/arch/arm/mm/init.c
+++ mmotm-2.6.35-0701/arch/arm/mm/init.c
@@ -234,6 +234,13 @@ static void __init arm_bootmem_free(stru
 	arch_adjust_zones(zone_size, zhole_size);
 
 	free_area_init_node(0, zone_size, min, zhole_size);
+
+#ifdef CONFIG_SPARSEMEM
+	for_each_bank(i, mi) {
+		mark_memmap_pit(bank_start_pfn(mi->bank[i]),
+				bank_end_pfn(mi->bank[i]), true);
+	}
+#endif
 }
 
 #ifndef CONFIG_SPARSEMEM
@@ -386,8 +393,10 @@ free_memmap(unsigned long start_pfn, uns
 	 * If there are free pages between these,
 	 * free the section of the memmap array.
 	 */
-	if (pg < pgend)
+	if (pg < pgend) {
+		mark_memap_pit(pg >> PAGE_SHIFT, pgend >> PAGE_SHIFT, false);
 		free_bootmem(pg, pgend - pg);
+	}
 }
 
 /*

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2010-07-14  0:27 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-12 15:53 Minchan Kim
2010-07-12 23:59 ` Kukjin Kim
2010-07-13  3:19 ` KAMEZAWA Hiroyuki
2010-07-13  4:11   ` Minchan Kim
2010-07-13  4:23     ` KAMEZAWA Hiroyuki
2010-07-13  6:04       ` Minchan Kim
2010-07-13  6:40         ` KAMEZAWA Hiroyuki
2010-07-13  8:06           ` Minchan Kim
2010-07-13  8:03             ` KAMEZAWA Hiroyuki
2010-07-13  7:20         ` Russell King - ARM Linux
2010-07-13  7:34           ` KAMEZAWA Hiroyuki
2010-07-13  7:58             ` KAMEZAWA Hiroyuki
2010-07-13  8:02               ` KAMEZAWA Hiroyuki
2010-07-13 18:39                 ` Russell King - ARM Linux
2010-07-13 20:46                   ` Dave Hansen
2010-07-13  9:30 ` Johannes Weiner
2010-07-13 15:43   ` Minchan Kim
2010-07-13 16:35     ` Dave Hansen
2010-07-13 16:44       ` Minchan Kim
2010-07-14  0:23         ` KAMEZAWA Hiroyuki [this message]
2010-07-14  6:44           ` Minchan Kim
2010-07-14  7:10             ` KAMEZAWA Hiroyuki
2010-07-14  7:35               ` Minchan Kim
2010-07-14  7:39                 ` KAMEZAWA Hiroyuki
2010-07-14  7:50           ` Kukjin Kim
2010-07-14  8:09             ` KAMEZAWA Hiroyuki
2010-07-13  9:37 ` Mel Gorman
2010-07-13  9:46   ` Russell King - ARM Linux
2010-07-13 10:00     ` Mel Gorman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100714092301.69e7e628.kamezawa.hiroyu@jp.fujitsu.com \
    --to=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=akpm@linux-foundation.org \
    --cc=arm-kernel@lists.infradead.org \
    --cc=dave@linux.vnet.ibm.com \
    --cc=hannes@cmpxchg.org \
    --cc=hpa@zytor.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mel@csn.ul.ie \
    --cc=minchan.kim@gmail.com \
    --cc=shaohua.li@intel.com \
    --cc=yakui.zhao@intel.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox