From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
To: Rik van Riel <riel@redhat.com>
Cc: kosaki.motohiro@jp.fujitsu.com,
Andrew Morton <akpm@linux-foundation.org>,
Shaohua Li <shaohua.li@intel.com>,
"Wu, Fengguang" <fengguang.wu@intel.com>,
"linux-mm@kvack.org" <linux-mm@kvack.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH]vmscan: handle underflow for get_scan_ratio
Date: Tue, 13 Apr 2010 16:55:15 +0900 (JST) [thread overview]
Message-ID: <20100413144519.D107.A69D9226@jp.fujitsu.com> (raw)
In-Reply-To: <4BC3DA2B.3070605@redhat.com>
> On 04/12/2010 09:30 PM, KOSAKI Motohiro wrote:
> >> On 04/09/2010 05:20 PM, Andrew Morton wrote:
> >>
> >>> Come to that, it's not obvious that we need this in 2.6.34 either. What
> >>> is the user-visible impact here?
> >>
> >> I suspect very little impact, especially during workloads
> >> where we can just reclaim clean page cache at DEF_PRIORITY.
> >> FWIW, the patch looks good to me, so:
> >>
> >> Acked-by: Rik van Riel<riel@redhat.com>
> >>
> >
> > I'm surprised this ack a bit. Rik, do you have any improvement plan about
> > streaming io detection logic?
> > I think the patch have a slightly marginal benefit, it help to<1% scan
> > ratio case. but it have big regression, it cause streaming io (e.g. backup
> > operation) makes tons swap.
>
> How? From the description I believe it took 16GB in
> a zone before we start scanning anon pages when
> reclaiming at DEF_PRIORITY?
>
> Would that casue a problem?
Please remember, 2.6.27 has following +1 scanning modifier.
zone->nr_scan_active += (zone_page_state(zone, NR_ACTIVE) >> priority) + 1;
^^^^
and, early (ano not yet merged) SplitLRU VM has similar +1. likes
scan = zone_nr_lru_pages(zone, sc, l);
scan >>= priority;
scan = (scan * percent[file]) / 100 + 1;
^^^
We didn't think only one page scanning is not big matter. but it was not
correct. we got streaming io bug report. the above +1 makes annoying swap
io. because some server need big backup operation rather much much than
physical memory size.
example, If vm are dropping 1TB use once pages, 0.1% anon scanning makes
1GB scan. and almost server only have some gigabyte swap although it
has >1TB memory.
If my memory is not correct, please correct me.
My point is, greater or smaller than 16GB isn't essential. all patches
should have big worth than the downside. The description said "the impact
sounds not a big deal", nobody disagree it. but it's worth is more little.
I don't imagine this patch improve anything.
>
> > So, I thought we sould do either,
> > 1) drop this one
> > 2) merge to change stream io detection logic improvement at first, and
> > merge this one at second.
>
> We may need better streaming IO detection, anyway.
agreed. that's no doubt.
> I have noticed that while heavy sequential reads are fine,
> the virtual machines on my desktop system do a lot of whole
> block writes. Presumably, a lot of those writes are to the
> same blocks, over and over again.
>
> This causes the blocks to be promoted to the active file
> list, which ends up growing the active file list to the
> point where things from the working set get evicted.
>
> All for file pages that may only get WRITTEN to by the
> guests, because the guests cache their own copy whenever
> they need to read them!
>
> I'll have to check the page cache code to see if it
> keeps frequently written pages as accessed. We may be
> better off evicting frequently written pages, and
> keeping our cache space for data that is read...
One question, In such case your guest don't use DirectIO?
Or do you talk about guest VM behabior?
I guess inactive_file_is_low_global() can be improvement a lot.
but I'm not sure.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2010-04-13 7:55 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-30 5:53 Shaohua Li
2010-03-30 6:08 ` KOSAKI Motohiro
2010-03-30 6:32 ` Shaohua Li
2010-03-30 6:40 ` KOSAKI Motohiro
2010-03-30 6:53 ` Shaohua Li
2010-03-30 7:31 ` KOSAKI Motohiro
2010-03-30 8:13 ` Shaohua Li
2010-03-31 4:53 ` Shaohua Li
2010-03-31 5:38 ` KOSAKI Motohiro
2010-03-31 5:51 ` Wu Fengguang
2010-03-31 6:00 ` KOSAKI Motohiro
2010-03-31 6:03 ` Wu Fengguang
2010-04-01 22:16 ` Andrew Morton
2010-04-02 9:13 ` KOSAKI Motohiro
2010-04-06 1:22 ` Wu Fengguang
2010-04-06 3:36 ` Rik van Riel
2010-03-31 5:53 ` KOSAKI Motohiro
2010-04-02 6:50 ` Shaohua Li
2010-04-02 9:14 ` KOSAKI Motohiro
2010-04-02 9:24 ` Shaohua Li
2010-04-04 14:19 ` KOSAKI Motohiro
2010-04-06 1:25 ` Shaohua Li
2010-04-06 1:36 ` KOSAKI Motohiro
2010-04-06 1:50 ` Wu Fengguang
2010-04-06 2:06 ` KOSAKI Motohiro
2010-04-06 2:30 ` Wu Fengguang
2010-04-06 2:58 ` KOSAKI Motohiro
2010-04-06 3:31 ` Wu Fengguang
2010-04-06 3:40 ` Rik van Riel
2010-04-06 4:49 ` Wu Fengguang
2010-04-06 5:09 ` Shaohua Li
2010-04-04 0:48 ` Wu Fengguang
2010-04-06 1:27 ` Shaohua Li
2010-04-06 5:03 ` Wu Fengguang
2010-04-06 5:36 ` Shaohua Li
2010-04-09 6:51 ` Shaohua Li
2010-04-09 21:20 ` Andrew Morton
2010-04-09 21:25 ` Rik van Riel
2010-04-13 1:30 ` KOSAKI Motohiro
2010-04-13 2:42 ` Rik van Riel
2010-04-13 7:55 ` KOSAKI Motohiro [this message]
2010-04-13 8:55 ` KOSAKI Motohiro
2010-04-14 1:27 ` Shaohua Li
2010-04-15 3:25 ` KOSAKI Motohiro
2010-04-12 1:57 ` Shaohua Li
2010-03-31 5:41 ` Wu Fengguang
2010-03-30 10:17 ` Minchan Kim
2010-03-30 10:25 ` KOSAKI Motohiro
2010-03-30 11:56 ` Balbir Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100413144519.D107.A69D9226@jp.fujitsu.com \
--to=kosaki.motohiro@jp.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=fengguang.wu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=riel@redhat.com \
--cc=shaohua.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox