From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
Li Zefan <lizf@cn.fujitsu.com>, Paul Menage <menage@google.com>,
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>,
linux-mm <linux-mm@kvack.org>
Subject: [PATCH -mmotm 0/8] memcg: move charge at task migration (21/Dec)
Date: Mon, 21 Dec 2009 14:31:06 +0900 [thread overview]
Message-ID: <20091221143106.6ff3ca15.nishimura@mxp.nes.nec.co.jp> (raw)
Hi.
These are the latest version of my move-charge-at-task-migration patch.
As I said in http://marc.info/?l=linux-mm&m=126135930226969&w=2, I've fixed
the BUG I found in 14/Dec version, and I think they are ready to be merged
into mmotm. These patches are based on mmotm-2009-12-10-17-19, but can be
applied onto 2.6.33-rc1-git1 too.
[1/8] cgroup: introduce cancel_attach()
[2/8] cgroup: introduce coalesce css_get() and css_put()
[3/8] memcg: add interface to move charge at task migration
[4/8] memcg: move charges of anonymous page
[5/8] memcg: improve performance in moving charge
[6/8] memcg: avoid oom during moving charge
[7/8] memcg: move charges of anonymous swap
[8/8] memcg: improbe performance in moving swap charge
Documentation/cgroups/cgroups.txt | 13 +-
Documentation/cgroups/memory.txt | 56 +++-
include/linux/cgroup.h | 14 +-
include/linux/page_cgroup.h | 2 +
include/linux/swap.h | 1 +
kernel/cgroup.c | 45 ++-
mm/memcontrol.c | 649 +++++++++++++++++++++++++++++++++++--
mm/page_cgroup.c | 35 ++-
mm/swapfile.c | 31 ++
9 files changed, 796 insertions(+), 50 deletions(-)
Overall history of this patch set:
2009/12/21
- Fix NULL pointer dereference BUG.
2009/12/14
- rebase on mmotm-2009-12-10-17-19.
- split performance improvement patch into cgroup part and memcg part.
- make use of waitq in avoid-oom patch.
- add TODO section in memory.txt.
2009/12/04
- rebase on mmotm-2009-11-24-16-47.
- change the term "recharge" to "move charge".
- improve performance in moving charge.
- parse the page table in can_attach() phase again(go back to the old behavior),
because it doesn't add so big overheads, so it would be better to calculate
the precharge count more accurately.
2009/11/19
- rebase on mmotm-2009-11-17-14-03 + KAMEZAWA-san's show per-process swap usage
via procfs patch(v3).
- in can_attach(), instead of parsing the page table, make use of per process
mm_counter(anon_rss, swap_usage).
- handle recharge_at_immigrate as bitmask(as I did in first version)
2009/11/06
- remove "[RFC]".
- rebase on mmotm-2009-11-01-10-01.
- drop support for file cache and shmem/tmpfs(revisit in future).
- update Documentation/cgroup/memory.txt.
2009/10/13
- rebase on mmotm-2009-10-09-01-07 + KAMEZAWA-san's batched charge/uncharge(Oct09) + part
of KAMEZAWA-san's cleanup/fix patches(4,5,7 of Sep25 with some fixes).
- change the term "migrate" to "recharge".
2009/09/24
- change "migrate_charge" flag from "int" to "bool".
- in can_attach(), parse the page table of the task and count only the number
of target ptes and call try_charge() repeatedly. No isolation at this phase.
- in attach(), parse the page table of the task again, and isolate the target
page and call move_account() one by one.
- do no swap-in in moving swap account any more.
- add support for shmem/tmpfs's swap.
- update Documentation/cgroup/cgroup.txt.
2009/09/17
- first version
Regards,
Daisuke Nishimura.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2009-12-21 5:42 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-21 5:31 Daisuke Nishimura [this message]
2009-12-21 5:32 ` [PATCH -mmotm 1/8] cgroup: introduce cancel_attach() Daisuke Nishimura
2009-12-21 5:32 ` [PATCH -mmotm 2/8] cgroup: introduce coalesce css_get() and css_put() Daisuke Nishimura
2009-12-21 5:33 ` [PATCH -mmotm 3/8] memcg: add interface to move charge at task migration Daisuke Nishimura
2009-12-21 7:00 ` KAMEZAWA Hiroyuki
2009-12-21 5:35 ` [PATCH -mmotm 4/8] memcg: move charges of anonymous page Daisuke Nishimura
2009-12-21 7:01 ` KAMEZAWA Hiroyuki
2009-12-23 0:26 ` Andrew Morton
2009-12-21 5:36 ` [PATCH -mmotm 5/8] memcg: improve performance in moving charge Daisuke Nishimura
2009-12-21 7:02 ` KAMEZAWA Hiroyuki
2009-12-21 5:37 ` [PATCH -mmotm 6/8] memcg: avoid oom during " Daisuke Nishimura
2009-12-21 7:03 ` KAMEZAWA Hiroyuki
2009-12-21 5:38 ` [PATCH -mmotm 7/8] memcg: move charges of anonymous swap Daisuke Nishimura
2009-12-21 7:04 ` KAMEZAWA Hiroyuki
2010-02-04 3:31 ` Andrew Morton
2010-02-04 5:09 ` Daisuke Nishimura
2010-02-04 5:27 ` KAMEZAWA Hiroyuki
2010-02-04 7:18 ` Paul Mundt
2010-02-04 7:44 ` KAMEZAWA Hiroyuki
2010-02-04 15:32 ` Balbir Singh
2010-02-05 0:38 ` Daisuke Nishimura
2010-02-05 0:54 ` KAMEZAWA Hiroyuki
2010-02-05 1:16 ` Paul Mundt
2010-03-09 23:13 ` Andrew Morton
2010-03-10 2:50 ` Daisuke Nishimura
2009-12-21 5:40 ` [PATCH -mmotm 8/8] memcg: improve performance in moving swap charge Daisuke Nishimura
2009-12-21 7:05 ` KAMEZAWA Hiroyuki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091221143106.6ff3ca15.nishimura@mxp.nes.nec.co.jp \
--to=nishimura@mxp.nes.nec.co.jp \
--cc=akpm@linux-foundation.org \
--cc=balbir@linux.vnet.ibm.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-mm@kvack.org \
--cc=lizf@cn.fujitsu.com \
--cc=menage@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox