From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
To: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: linux-mm <linux-mm@kvack.org>,
Andrew Morton <akpm@linux-foundation.org>,
Balbir Singh <balbir@linux.vnet.ibm.com>,
Li Zefan <lizf@cn.fujitsu.com>, Paul Menage <menage@google.com>
Subject: Re: [PATCH -mmotm 4/8] memcg: cleanup mem_cgroup_move_parent()
Date: Fri, 6 Nov 2009 14:56:29 +0900 [thread overview]
Message-ID: <20091106145629.58b810e3.kamezawa.hiroyu@jp.fujitsu.com> (raw)
In-Reply-To: <20091106141301.497f2cef.nishimura@mxp.nes.nec.co.jp>
On Fri, 6 Nov 2009 14:13:01 +0900
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> wrote:
> mem_cgroup_move_parent() calls try_charge first and cancel_charge on failure.
> IMHO, charge/uncharge(especially charge) is high cost operation, so we should
> avoid it as far as possible.
>
> This patch tries to delay try_charge in mem_cgroup_move_parent() by re-ordering
> checks it does.
>
> And this patch renames mem_cgroup_move_account() to __mem_cgroup_move_account(),
> changes the return value of __mem_cgroup_move_account() from int to void,
> and adds a new wrapper(mem_cgroup_move_account()), which checks whether a @pc
> is valid for moving account and calls __mem_cgroup_move_account().
>
> This patch removes the last caller of trylock_page_cgroup(), so removes its
> definition too.
>
> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
> ---
> include/linux/page_cgroup.h | 7 +---
> mm/memcontrol.c | 84 ++++++++++++++++++-------------------------
> 2 files changed, 37 insertions(+), 54 deletions(-)
>
> diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
> index 4b938d4..b0e4eb1 100644
> --- a/include/linux/page_cgroup.h
> +++ b/include/linux/page_cgroup.h
> @@ -57,6 +57,8 @@ static inline void ClearPageCgroup##uname(struct page_cgroup *pc) \
> static inline int TestClearPageCgroup##uname(struct page_cgroup *pc) \
> { return test_and_clear_bit(PCG_##lname, &pc->flags); }
>
> +TESTPCGFLAG(Locked, LOCK)
> +
> /* Cache flag is set only once (at allocation) */
> TESTPCGFLAG(Cache, CACHE)
> CLEARPCGFLAG(Cache, CACHE)
> @@ -86,11 +88,6 @@ static inline void lock_page_cgroup(struct page_cgroup *pc)
> bit_spin_lock(PCG_LOCK, &pc->flags);
> }
>
> -static inline int trylock_page_cgroup(struct page_cgroup *pc)
> -{
> - return bit_spin_trylock(PCG_LOCK, &pc->flags);
> -}
> -
> static inline void unlock_page_cgroup(struct page_cgroup *pc)
> {
> bit_spin_unlock(PCG_LOCK, &pc->flags);
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index 05e837c..1ad3248 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -1613,27 +1613,22 @@ static void __mem_cgroup_commit_charge(struct mem_cgroup *mem,
> }
>
> /**
> - * mem_cgroup_move_account - move account of the page
> + * __mem_cgroup_move_account - move account of the page
> * @pc: page_cgroup of the page.
> * @from: mem_cgroup which the page is moved from.
> * @to: mem_cgroup which the page is moved to. @from != @to.
> *
> * The caller must confirm following.
> * - page is not on LRU (isolate_page() is useful.)
> - *
> - * returns 0 at success,
> - * returns -EBUSY when lock is busy or "pc" is unstable.
> + * - the pc is locked, used, and ->mem_cgroup points to @from.
> *
> * This function does "uncharge" from old cgroup but doesn't do "charge" to
> * new cgroup. It should be done by a caller.
> */
>
> -static int mem_cgroup_move_account(struct page_cgroup *pc,
> +static void __mem_cgroup_move_account(struct page_cgroup *pc,
> struct mem_cgroup *from, struct mem_cgroup *to)
> {
> - struct mem_cgroup_per_zone *from_mz, *to_mz;
> - int nid, zid;
> - int ret = -EBUSY;
> struct page *page;
> int cpu;
> struct mem_cgroup_stat *stat;
> @@ -1641,20 +1636,9 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
>
> VM_BUG_ON(from == to);
> VM_BUG_ON(PageLRU(pc->page));
> -
> - nid = page_cgroup_nid(pc);
> - zid = page_cgroup_zid(pc);
> - from_mz = mem_cgroup_zoneinfo(from, nid, zid);
> - to_mz = mem_cgroup_zoneinfo(to, nid, zid);
> -
> - if (!trylock_page_cgroup(pc))
> - return ret;
> -
> - if (!PageCgroupUsed(pc))
> - goto out;
> -
> - if (pc->mem_cgroup != from)
> - goto out;
> + VM_BUG_ON(!PageCgroupLocked(pc));
> + VM_BUG_ON(!PageCgroupUsed(pc));
> + VM_BUG_ON(pc->mem_cgroup != from);
>
> if (!mem_cgroup_is_root(from))
> res_counter_uncharge(&from->res, PAGE_SIZE);
> @@ -1683,15 +1667,28 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
> css_get(&to->css);
> pc->mem_cgroup = to;
> mem_cgroup_charge_statistics(to, pc, true);
> - ret = 0;
> -out:
> - unlock_page_cgroup(pc);
> /*
> * We charges against "to" which may not have any tasks. Then, "to"
> * can be under rmdir(). But in current implementation, caller of
> * this function is just force_empty() and it's garanteed that
> * "to" is never removed. So, we don't check rmdir status here.
> */
> +}
> +
> +/*
> + * check whether the @pc is valid for moving account and call
> + * __mem_cgroup_move_account()
> + */
> +static int mem_cgroup_move_account(struct page_cgroup *pc,
> + struct mem_cgroup *from, struct mem_cgroup *to)
> +{
> + int ret = -EINVAL;
> + lock_page_cgroup(pc);
> + if (PageCgroupUsed(pc) && pc->mem_cgroup == from) {
> + __mem_cgroup_move_account(pc, from, to);
> + ret = 0;
> + }
> + unlock_page_cgroup(pc);
> return ret;
> }
>
> @@ -1713,38 +1710,27 @@ static int mem_cgroup_move_parent(struct page_cgroup *pc,
> if (!pcg)
> return -EINVAL;
>
> + ret = -EBUSY;
> + if (!get_page_unless_zero(page))
> + goto out;
> + if (isolate_lru_page(page))
> + goto put;
>
> parent = mem_cgroup_from_cont(pcg);
> -
> -
> ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false, page);
> if (ret || !parent)
> - return ret;
> -
> - if (!get_page_unless_zero(page)) {
> - ret = -EBUSY;
> - goto uncharge;
> - }
> -
> - ret = isolate_lru_page(page);
> -
> - if (ret)
> - goto cancel;
> + goto put_back;
>
> ret = mem_cgroup_move_account(pc, child, parent);
> -
> + if (!ret)
> + css_put(&parent->css); /* drop extra refcnt by try_charge() */
> + else
> + mem_cgroup_cancel_charge(parent); /* does css_put */
> +put_back:
> putback_lru_page(page);
> - if (!ret) {
> - put_page(page);
> - /* drop extra refcnt by try_charge() */
> - css_put(&parent->css);
> - return 0;
> - }
> -
> -cancel:
> +put:
> put_page(page);
> -uncharge:
> - mem_cgroup_cancel_charge(parent);
> +out:
> return ret;
> }
>
> --
> 1.5.6.1
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2009-11-06 5:59 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-06 5:10 [PATCH -mmotm 0/8] memcg: recharge at task move Daisuke Nishimura
2009-11-06 5:11 ` [PATCH -mmotm 1/8] cgroup: introduce cancel_attach() Daisuke Nishimura
2009-11-09 6:57 ` Balbir Singh
2009-11-09 7:18 ` Li Zefan
2009-11-09 7:23 ` Daisuke Nishimura
2009-11-09 7:23 ` Li Zefan
2009-11-09 7:38 ` Daisuke Nishimura
2009-11-06 5:11 ` [PATCH -mmotm 2/8] memcg: move memcg_tasklist mutex Daisuke Nishimura
2009-11-06 5:54 ` KAMEZAWA Hiroyuki
2009-11-06 7:49 ` Daisuke Nishimura
2009-11-06 8:02 ` KAMEZAWA Hiroyuki
2009-11-10 19:14 ` Balbir Singh
2009-11-10 23:44 ` Daisuke Nishimura
2009-11-06 5:12 ` [PATCH -mmotm 3/8] memcg: add mem_cgroup_cancel_charge() Daisuke Nishimura
2009-11-06 5:13 ` [PATCH -mmotm 4/8] memcg: cleanup mem_cgroup_move_parent() Daisuke Nishimura
2009-11-06 5:56 ` KAMEZAWA Hiroyuki [this message]
2009-11-06 5:14 ` [PATCH -mmotm 5/8] memcg: add interface to recharge at task move Daisuke Nishimura
2009-11-06 6:06 ` KAMEZAWA Hiroyuki
2009-11-06 5:14 ` [PATCH -mmotm 6/8] memcg: recharge charges of anonymous page Daisuke Nishimura
2009-11-06 6:35 ` KAMEZAWA Hiroyuki
2009-11-09 0:31 ` Daisuke Nishimura
2009-11-06 5:15 ` [PATCH -mmotm 7/8] memcg: avoid oom during recharge at task move Daisuke Nishimura
2009-11-06 6:39 ` KAMEZAWA Hiroyuki
2009-11-06 5:16 ` [PATCH -mmotm 8/8] memcg: recharge charges of anonymous swap Daisuke Nishimura
2009-11-06 6:45 ` [PATCH -mmotm 0/8] memcg: recharge at task move KAMEZAWA Hiroyuki
2009-11-09 1:44 ` Daisuke Nishimura
2009-11-09 5:16 ` KAMEZAWA Hiroyuki
2009-11-09 5:08 ` Balbir Singh
2009-11-09 8:24 ` Daisuke Nishimura
2009-11-11 1:35 ` [PATCH -mmotm 0/3] some cleanups for memcg Daisuke Nishimura
2009-11-11 1:36 ` [PATCH -mmotm 1/3] memcg: add mem_cgroup_cancel_charge() Daisuke Nishimura
2009-11-11 4:24 ` Balbir Singh
2009-11-11 1:37 ` [PATCH -mmotm 2/3] memcg: cleanup mem_cgroup_move_parent() Daisuke Nishimura
2009-11-11 14:40 ` Balbir Singh
2009-11-11 15:16 ` Daisuke Nishimura
2009-11-11 1:39 ` [PATCH -mmotm 3/3] memcg: remove memcg_tasklist Daisuke Nishimura
2009-11-11 1:49 ` KAMEZAWA Hiroyuki
2009-11-11 16:01 ` Balbir Singh
2009-11-12 8:05 ` Daisuke Nishimura
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091106145629.58b810e3.kamezawa.hiroyu@jp.fujitsu.com \
--to=kamezawa.hiroyu@jp.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=balbir@linux.vnet.ibm.com \
--cc=linux-mm@kvack.org \
--cc=lizf@cn.fujitsu.com \
--cc=menage@google.com \
--cc=nishimura@mxp.nes.nec.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox