From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
To: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "linux-mm@kvack.org" <linux-mm@kvack.org>,
"akpm@linux-foundation.org" <akpm@linux-foundation.org>,
"balbir@linux.vnet.ibm.com" <balbir@linux.vnet.ibm.com>,
"nishimura@mxp.nes.nec.co.jp" <nishimura@mxp.nes.nec.co.jp>,
"kosaki.motohiro@jp.fujitsu.com" <kosaki.motohiro@jp.fujitsu.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
gorcunov@gmail.com, penberg@cs.helsinki.fi
Subject: [PATCH 11/21] memcg-make-inactive_anon_is_low.patch
Date: Wed, 3 Dec 2008 14:00:16 +0900 [thread overview]
Message-ID: <20081203140016.0c9bc53a.kamezawa.hiroyu@jp.fujitsu.com> (raw)
In-Reply-To: <20081203134718.6b60986f.kamezawa.hiroyu@jp.fujitsu.com>
Changelog:
v1 -> v2:
- add detail patch description
- fix coding style in mem_cgroup_set_inactive_ratio()
- add comment to mem_cgroup_set_inactive_ratio
- remove extra newline
- memcg::inactiveratio change type to unsigned int
The inactive_anon_is_low() is key component of active/inactive anon balancing on reclaim.
However current inactive_anon_is_low() function only consider global reclaim.
Therefore, we need following ugly scan_global_lru() condision.
if (lru == LRU_ACTIVE_ANON &&
(!scan_global_lru(sc) || inactive_anon_is_low(zone))) {
shrink_active_list(nr_to_scan, zone, sc, priority, file);
return 0;
it cause that memcg reclaim always deactivate pages when shrink_list() is called.
To make mem_cgroup_inactive_anon_is_low() improve active/inactive anon balancing of memcgroup.
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
CC: Cyrill Gorcunov <gorcunov@gmail.com>
CC: "Pekka Enberg" <penberg@cs.helsinki.fi>
include/linux/memcontrol.h | 9 ++++++++
mm/memcontrol.c | 46 ++++++++++++++++++++++++++++++++++++++++++++-
mm/vmscan.c | 36 ++++++++++++++++++++++-------------
3 files changed, 77 insertions(+), 14 deletions(-)
Index: mmotm-2.6.28-Dec02/include/linux/memcontrol.h
===================================================================
--- mmotm-2.6.28-Dec02.orig/include/linux/memcontrol.h
+++ mmotm-2.6.28-Dec02/include/linux/memcontrol.h
@@ -100,6 +100,8 @@ extern void mem_cgroup_record_reclaim_pr
extern long mem_cgroup_calc_reclaim(struct mem_cgroup *mem, struct zone *zone,
int priority, enum lru_list lru);
+int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg,
+ struct zone *zone);
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
extern int do_swap_account;
@@ -251,6 +253,13 @@ static inline bool mem_cgroup_oom_called
{
return false;
}
+
+static inline int
+mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg, struct zone *zone)
+{
+ return 1;
+}
+
#endif /* CONFIG_CGROUP_MEM_CONT */
#endif /* _LINUX_MEMCONTROL_H */
Index: mmotm-2.6.28-Dec02/mm/memcontrol.c
===================================================================
--- mmotm-2.6.28-Dec02.orig/mm/memcontrol.c
+++ mmotm-2.6.28-Dec02/mm/memcontrol.c
@@ -156,6 +156,9 @@ struct mem_cgroup {
unsigned long last_oom_jiffies;
int obsolete;
atomic_t refcnt;
+
+ unsigned int inactive_ratio;
+
/*
* statistics. This must be placed at the end of memcg.
*/
@@ -431,6 +434,20 @@ long mem_cgroup_calc_reclaim(struct mem_
return (nr_pages >> priority);
}
+int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg, struct zone *zone)
+{
+ unsigned long active;
+ unsigned long inactive;
+
+ inactive = mem_cgroup_get_all_zonestat(memcg, LRU_INACTIVE_ANON);
+ active = mem_cgroup_get_all_zonestat(memcg, LRU_ACTIVE_ANON);
+
+ if (inactive * memcg->inactive_ratio < active)
+ return 1;
+
+ return 0;
+}
+
unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
struct list_head *dst,
unsigned long *scanned, int order,
@@ -1360,6 +1377,29 @@ int mem_cgroup_shrink_usage(struct mm_st
return 0;
}
+/*
+ * The inactive anon list should be small enough that the VM never has to
+ * do too much work, but large enough that each inactive page has a chance
+ * to be referenced again before it is swapped out.
+ *
+ * this calculation is straightforward porting from
+ * page_alloc.c::setup_per_zone_inactive_ratio().
+ * it describe more detail.
+ */
+static void mem_cgroup_set_inactive_ratio(struct mem_cgroup *memcg)
+{
+ unsigned int gb, ratio;
+
+ gb = res_counter_read_u64(&memcg->res, RES_LIMIT) >> 30;
+ if (gb)
+ ratio = int_sqrt(10 * gb);
+ else
+ ratio = 1;
+
+ memcg->inactive_ratio = ratio;
+
+}
+
static DEFINE_MUTEX(set_limit_mutex);
static int mem_cgroup_resize_limit(struct mem_cgroup *memcg,
@@ -1398,6 +1438,10 @@ static int mem_cgroup_resize_limit(struc
GFP_KERNEL, false);
if (!progress) retry_count--;
}
+
+ if (!ret)
+ mem_cgroup_set_inactive_ratio(memcg);
+
return ret;
}
@@ -1982,7 +2026,7 @@ mem_cgroup_create(struct cgroup_subsys *
res_counter_init(&mem->res, NULL);
res_counter_init(&mem->memsw, NULL);
}
-
+ mem_cgroup_set_inactive_ratio(mem);
mem->last_scanned_child = NULL;
return &mem->css;
Index: mmotm-2.6.28-Dec02/mm/vmscan.c
===================================================================
--- mmotm-2.6.28-Dec02.orig/mm/vmscan.c
+++ mmotm-2.6.28-Dec02/mm/vmscan.c
@@ -1364,14 +1364,7 @@ static void shrink_active_list(unsigned
pagevec_release(&pvec);
}
-/**
- * inactive_anon_is_low - check if anonymous pages need to be deactivated
- * @zone: zone to check
- *
- * Returns true if the zone does not have enough inactive anon pages,
- * meaning some active anon pages need to be deactivated.
- */
-static int inactive_anon_is_low(struct zone *zone)
+static int inactive_anon_is_low_global(struct zone *zone)
{
unsigned long active, inactive;
@@ -1384,6 +1377,25 @@ static int inactive_anon_is_low(struct z
return 0;
}
+/**
+ * inactive_anon_is_low - check if anonymous pages need to be deactivated
+ * @zone: zone to check
+ * @sc: scan control of this context
+ *
+ * Returns true if the zone does not have enough inactive anon pages,
+ * meaning some active anon pages need to be deactivated.
+ */
+static int inactive_anon_is_low(struct zone *zone, struct scan_control *sc)
+{
+ int low;
+
+ if (scan_global_lru(sc))
+ low = inactive_anon_is_low_global(zone);
+ else
+ low = mem_cgroup_inactive_anon_is_low(sc->mem_cgroup, zone);
+ return low;
+}
+
static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
struct zone *zone, struct scan_control *sc, int priority)
{
@@ -1395,7 +1407,7 @@ static unsigned long shrink_list(enum lr
}
if (lru == LRU_ACTIVE_ANON &&
- (!scan_global_lru(sc) || inactive_anon_is_low(zone))) {
+ inactive_anon_is_low(zone, sc)) {
shrink_active_list(nr_to_scan, zone, sc, priority, file);
return 0;
}
@@ -1560,9 +1572,7 @@ static void shrink_zone(int priority, st
* Even if we did not try to evict anon pages at all, we want to
* rebalance the anon lru active/inactive ratio.
*/
- if (!scan_global_lru(sc) || inactive_anon_is_low(zone))
- shrink_active_list(SWAP_CLUSTER_MAX, zone, sc, priority, 0);
- else if (!scan_global_lru(sc))
+ if (inactive_anon_is_low(zone, sc))
shrink_active_list(SWAP_CLUSTER_MAX, zone, sc, priority, 0);
throttle_vm_writeout(sc->gfp_mask);
@@ -1858,7 +1868,7 @@ loop_again:
* Do some background aging of the anon list, to give
* pages a chance to be referenced before reclaiming.
*/
- if (inactive_anon_is_low(zone))
+ if (inactive_anon_is_low(zone, &sc))
shrink_active_list(SWAP_CLUSTER_MAX, zone,
&sc, priority, 0);
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2008-12-03 5:01 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-03 4:47 [PATCH 0/21] memcg updates 2008/12/03 KAMEZAWA Hiroyuki
2008-12-03 4:48 ` [PATCH 1/21] memcg-revert-gfp-mask-fix.patch KAMEZAWA Hiroyuki
2008-12-03 4:50 ` [PATCH 2/21] memcg-check-group-leader-fix.patch KAMEZAWA Hiroyuki
2008-12-03 4:51 ` [PATCH 3/21] memcg-memoryswap-controller-fix-limit-check.patch KAMEZAWA Hiroyuki
2008-12-03 4:52 ` [PATCH 4/21] memcg-swapout-refcnt-fix.patch KAMEZAWA Hiroyuki
2008-12-03 4:53 ` [PATCH 5/21] memcg-hierarchy-avoid-unnecessary-reclaim.patch KAMEZAWA Hiroyuki
2008-12-03 4:54 ` [PATCH 6/21] inactive_anon_is_low-move-to-vmscan.patch KAMEZAWA Hiroyuki
2008-12-03 4:55 ` [PATCH 7/21] introduce-zone_reclaim-struct.patch KAMEZAWA Hiroyuki
2008-12-03 4:55 ` [PATCH 8/21] make-zone-nr_pages-helper-function.patch KAMEZAWA Hiroyuki
2008-12-03 4:57 ` [PATCH 9/21] make-get_scan_ratio-to-memcg-safe.patch KAMEZAWA Hiroyuki
2008-12-03 4:58 ` [PATCH 10/21] memcg-add-null-check-to-page_cgroup_zoneinfo.patch KAMEZAWA Hiroyuki
2008-12-03 5:00 ` KAMEZAWA Hiroyuki [this message]
2008-12-03 5:01 ` [PATCH 12/21] memcg-make-mem_cgroup_zone_nr_pages.patch KAMEZAWA Hiroyuki
2008-12-03 5:02 ` [PATCH 13/21] memcg-make-zone_reclaim_stat.patch KAMEZAWA Hiroyuki
2008-12-03 5:04 ` [PATCH 14/21] memcg-remove-mem_cgroup_cal_reclaim.patch KAMEZAWA Hiroyuki
2008-12-03 5:05 ` [PATCH 15/21] memcg-show-reclaim-stat.patch KAMEZAWA Hiroyuki
2008-12-03 5:06 ` [PATCH 16/21] memcg-rename-scan-glonal-lru.patch KAMEZAWA Hiroyuki
2008-12-03 5:08 ` [PATCH 17/21] memcg_prev_priority_protect.patch KAMEZAWA Hiroyuki
2008-12-03 5:09 ` [PATCH 18/21] memcg-swappiness.patch KAMEZAWA Hiroyuki
2008-12-03 5:11 ` [Experimental][PATCH 19/21] memcg-fix-pre-destroy.patch KAMEZAWA Hiroyuki
2008-12-04 9:34 ` Daisuke Nishimura
2008-12-04 9:43 ` KAMEZAWA Hiroyuki
2008-12-04 9:49 ` KAMEZAWA Hiroyuki
2008-12-04 10:17 ` Daisuke Nishimura
2008-12-03 5:12 ` [Experimental][PATCH 20/21] cgroup_id.patch KAMEZAWA Hiroyuki
2008-12-03 5:14 ` [Experimental][PATCH 21/21] memcg-new-hierarchical-reclaim.patch KAMEZAWA Hiroyuki
2008-12-04 11:00 ` Daisuke Nishimura
2008-12-04 12:44 ` [Experimental][PATCH 21/21]memcg-new-hierarchical-reclaim.patch KAMEZAWA Hiroyuki
2008-12-03 5:15 ` [PATCH 22/21] memcg-explain-details-and-test-document.patch KAMEZAWA Hiroyuki
2008-12-03 5:20 ` [PATCH 0/21] memcg updates 2008/12/03 KAMEZAWA Hiroyuki
2008-12-03 5:56 ` Andrew Morton
2008-12-03 6:17 ` KAMEZAWA Hiroyuki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081203140016.0c9bc53a.kamezawa.hiroyu@jp.fujitsu.com \
--to=kamezawa.hiroyu@jp.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=balbir@linux.vnet.ibm.com \
--cc=gorcunov@gmail.com \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nishimura@mxp.nes.nec.co.jp \
--cc=penberg@cs.helsinki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox