From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-mm@kvack.org" <linux-mm@kvack.org>,
"balbir@linux.vnet.ibm.com" <balbir@linux.vnet.ibm.com>,
"mingo@elte.hu" <mingo@elte.hu>,
"lizf@cn.fujitsu.com" <lizf@cn.fujitsu.com>,
"nishimura@mxp.nes.nec.co.jp" <nishimura@mxp.nes.nec.co.jp>
Subject: Re: [PATCH][BUGFIX] memcg: fix page_cgroup allocation
Date: Wed, 22 Oct 2008 10:42:59 +0900 [thread overview]
Message-ID: <20081022104259.fb068b8b.kamezawa.hiroyu@jp.fujitsu.com> (raw)
In-Reply-To: <20081021183738.d3c995b9.akpm@linux-foundation.org>
On Tue, 21 Oct 2008 18:37:38 -0700
Andrew Morton <akpm@linux-foundation.org> wrote:
> Didn't the linux/cgroup.h -> linux/cgroup_subsys..h inclusion already
> declare this for us?
>
you're right, I'm wrong. fixed one is here. (confirmed by make mm/page_cgroup.i)
Regards,
-Kame
==
page_cgroup_init() is called from mem_cgroup_init(). But at this
point, we cannot call alloc_bootmem().
(and this caused panic at boot.)
This patch moves page_cgroup_init() to init/main.c.
Time table is following:
==
parse_args(). # we can trust mem_cgroup_subsys.disabled bit after this.
....
cgroup_init_early() # "early" init of cgroup.
....
setup_arch() # memmap is allocated.
...
page_cgroup_init();
mem_init(); # we cannot call alloc_bootmem after this.
....
cgroup_init() # mem_cgroup is initialized.
==
Before page_cgroup_init(), mem_map must be initialized. So,
I added page_cgroup_init() to init/main.c directly.
(*) maybe this is not very clean but cgroup_init_early() is too early
and we have to use vmalloc instead of alloc_bootmem() in cgroup_init().
usage of vmalloc area in x86-32 is important and we should avoid
vmalloc() in x86-32. So, we want to use alloc_bootmem() from
sutaible place.
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
init/main.c | 2 ++
mm/memcontrol.c | 1 -
mm/page_cgroup.c | 33 ++++++++++++++++++++++++++-------
3 files changed, 28 insertions(+), 8 deletions(-)
Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c
+++ linux-2.6/init/main.c
@@ -62,6 +62,7 @@
#include <linux/signal.h>
#include <linux/idr.h>
#include <linux/ftrace.h>
+#include <linux/page_cgroup.h>
#include <asm/io.h>
#include <asm/bugs.h>
@@ -647,6 +648,7 @@ asmlinkage void __init start_kernel(void
vmalloc_init();
vfs_caches_init_early();
cpuset_init_early();
+ page_cgroup_init();
mem_init();
enable_debug_pagealloc();
cpu_hotplug_init();
Index: linux-2.6/mm/memcontrol.c
===================================================================
--- linux-2.6.orig/mm/memcontrol.c
+++ linux-2.6/mm/memcontrol.c
@@ -1088,7 +1088,6 @@ mem_cgroup_create(struct cgroup_subsys *
int node;
if (unlikely((cont->parent) == NULL)) {
- page_cgroup_init();
mem = &init_mem_cgroup;
} else {
mem = mem_cgroup_alloc();
Index: linux-2.6/mm/page_cgroup.c
===================================================================
--- linux-2.6.orig/mm/page_cgroup.c
+++ linux-2.6/mm/page_cgroup.c
@@ -4,7 +4,10 @@
#include <linux/bit_spinlock.h>
#include <linux/page_cgroup.h>
#include <linux/hash.h>
+#include <linux/slab.h>
#include <linux/memory.h>
+#include <linux/cgroup.h>
+
static void __meminit
__init_page_cgroup(struct page_cgroup *pc, unsigned long pfn)
@@ -66,6 +69,9 @@ void __init page_cgroup_init(void)
int nid, fail;
+ if (mem_cgroup_subsys.disabled)
+ return;
+
for_each_online_node(nid) {
fail = alloc_node_page_cgroup(nid);
if (fail)
@@ -106,9 +112,14 @@ int __meminit init_section_page_cgroup(u
nid = page_to_nid(pfn_to_page(pfn));
table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
- base = kmalloc_node(table_size, GFP_KERNEL, nid);
- if (!base)
- base = vmalloc_node(table_size, nid);
+ if (slab_is_available()) {
+ base = kmalloc_node(table_size, GFP_KERNEL, nid);
+ if (!base)
+ base = vmalloc_node(table_size, nid);
+ } else {
+ base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), table_size,
+ PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+ }
if (!base) {
printk(KERN_ERR "page cgroup allocation failure\n");
@@ -135,11 +146,16 @@ void __free_page_cgroup(unsigned long pf
if (!ms || !ms->page_cgroup)
return;
base = ms->page_cgroup + pfn;
- ms->page_cgroup = NULL;
- if (is_vmalloc_addr(base))
+ if (is_vmalloc_addr(base)) {
vfree(base);
- else
- kfree(base);
+ ms->page_cgroup = NULL;
+ } else {
+ struct page *page = virt_to_page(base);
+ if (!PageReserved(page)) { /* Is bootmem ? */
+ kfree(base);
+ ms->page_cgroup = NULL;
+ }
+ }
}
int online_page_cgroup(unsigned long start_pfn,
@@ -213,6 +229,9 @@ void __init page_cgroup_init(void)
unsigned long pfn;
int fail = 0;
+ if (mem_cgroup_subsys.disabled)
+ return;
+
for (pfn = 0; !fail && pfn < max_pfn; pfn += PAGES_PER_SECTION) {
if (!pfn_present(pfn))
continue;
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
prev parent reply other threads:[~2008-10-22 1:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-22 1:24 KAMEZAWA Hiroyuki
2008-10-22 1:37 ` Andrew Morton
2008-10-22 1:42 ` Li Zefan
2008-10-22 1:42 ` KAMEZAWA Hiroyuki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081022104259.fb068b8b.kamezawa.hiroyu@jp.fujitsu.com \
--to=kamezawa.hiroyu@jp.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=balbir@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lizf@cn.fujitsu.com \
--cc=mingo@elte.hu \
--cc=nishimura@mxp.nes.nec.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox