From: Mel Gorman <mel@csn.ul.ie>
To: davej@codemonkey.org.uk, tony.luck@intel.com, linux-mm@kvack.org,
ak@suse.de, bob.picco@hp.com, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org
Cc: Mel Gorman <mel@csn.ul.ie>
Subject: [PATCH 7/7] Print out debugging information during initialisation
Date: Thu, 13 Apr 2006 00:22:57 +0100 (IST) [thread overview]
Message-ID: <20060412232257.18862.80856.sendpatchset@skynet> (raw)
In-Reply-To: <20060412232036.18862.84118.sendpatchset@skynet>
The zone and hole sizing code is new and unexpected problems showed up
on machines that were not covered by the pre-release tests. This patch
prints out useful information when those unexpected situations occur.
It is not expected that this patch become a permanent part of the set.
mem_init.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++----
1 files changed, 46 insertions(+), 4 deletions(-)
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
diff -rup -X /usr/src/patchset-0.5/bin//dontdiff linux-2.6.17-rc1-106-breakout_mem_init/mm/mem_init.c linux-2.6.17-rc1-107-debug/mm/mem_init.c
--- linux-2.6.17-rc1-106-breakout_mem_init/mm/mem_init.c 2006-04-12 23:37:42.000000000 +0100
+++ linux-2.6.17-rc1-107-debug/mm/mem_init.c 2006-04-13 00:05:58.000000000 +0100
@@ -645,13 +645,23 @@ void __init free_bootmem_with_active_reg
for_each_active_range_index_in_nid(i, nid) {
unsigned long size_pages = 0;
unsigned long end_pfn = early_node_map[i].end_pfn;
- if (early_node_map[i].start_pfn >= max_low_pfn)
+ if (early_node_map[i].start_pfn >= max_low_pfn) {
+ printk("start_pfn %lu >= %lu\n", early_node_map[i].start_pfn,
+ max_low_pfn);
continue;
+ }
- if (end_pfn > max_low_pfn)
+ if (end_pfn > max_low_pfn) {
+ printk("end_pfn %lu going back to %lu\n", early_node_map[i].end_pfn,
+ max_low_pfn);
end_pfn = max_low_pfn;
+ }
size_pages = end_pfn - early_node_map[i].start_pfn;
+ printk("free_bootmem_node(%d, %lu, %lu)\n",
+ early_node_map[i].nid,
+ PFN_PHYS(early_node_map[i].start_pfn),
+ PFN_PHYS(size_pages));
free_bootmem_node(NODE_DATA(early_node_map[i].nid),
PFN_PHYS(early_node_map[i].start_pfn),
PFN_PHYS(size_pages));
@@ -661,10 +671,15 @@ void __init free_bootmem_with_active_reg
void __init memory_present_with_active_regions(int nid)
{
unsigned int i;
- for_each_active_range_index_in_nid(i, nid)
+ for_each_active_range_index_in_nid(i, nid) {
+ printk("memory_present(%d, %lu, %lu)\n",
+ early_node_map[i].nid,
+ early_node_map[i].start_pfn,
+ early_node_map[i].end_pfn);
memory_present(early_node_map[i].nid,
early_node_map[i].start_pfn,
early_node_map[i].end_pfn);
+ }
}
void __init get_pfn_range_for_nid(unsigned int nid,
@@ -738,10 +753,17 @@ unsigned long __init zone_absent_pages_i
start_pfn = early_node_map[i].start_pfn;
if (start_pfn > arch_zone_highest_possible_pfn[zone_type])
start_pfn = arch_zone_highest_possible_pfn[zone_type];
- BUG_ON(prev_end_pfn > start_pfn);
+ if (prev_end_pfn > start_pfn) {
+ printk("prev_end > start_pfn : %lu > %lu\n",
+ prev_end_pfn,
+ start_pfn);
+ BUG();
+ }
/* Update the hole size cound and move on */
hole_pages += start_pfn - prev_end_pfn;
+ printk("Hole found index %d: %lu -> %lu\n",
+ i, prev_end_pfn, start_pfn);
prev_end_pfn = early_node_map[i].end_pfn;
}
@@ -892,6 +914,9 @@ void __init add_active_range(unsigned in
{
unsigned int i;
+ printk("add_active_range(%d, %lu, %lu): ",
+ nid, start_pfn, end_pfn);
+
/* Merge with existing active regions if possible */
for (i = 0; early_node_map[i].end_pfn; i++) {
if (early_node_map[i].nid != nid)
@@ -900,6 +925,7 @@ void __init add_active_range(unsigned in
/* Merge forward if suitable */
if (start_pfn <= early_node_map[i].end_pfn &&
end_pfn > early_node_map[i].end_pfn) {
+ printk("Merging forward\n");
early_node_map[i].end_pfn = end_pfn;
return;
}
@@ -907,6 +933,7 @@ void __init add_active_range(unsigned in
/* Merge backward if suitable */
if (start_pfn < early_node_map[i].end_pfn &&
end_pfn >= early_node_map[i].start_pfn) {
+ printk("Merging backwards\n");
early_node_map[i].start_pfn = start_pfn;
return;
}
@@ -922,6 +949,7 @@ void __init add_active_range(unsigned in
return;
}
+ printk("New\n");
early_node_map[i].nid = nid;
early_node_map[i].start_pfn = start_pfn;
early_node_map[i].end_pfn = end_pfn;
@@ -951,6 +979,14 @@ static void __init sort_node_map(void)
sort(early_node_map, num, sizeof(struct node_active_region),
cmp_node_active_region, NULL);
+
+ printk("Dumping sorted node map\n");
+ for (num = 0; early_node_map[num].end_pfn; num++) {
+ printk("entry %lu: %d %lu -> %lu\n", num,
+ early_node_map[num].nid,
+ early_node_map[num].start_pfn,
+ early_node_map[num].end_pfn);
+ }
}
unsigned long __init find_min_pfn(void)
@@ -988,6 +1024,10 @@ void __init free_area_init_nodes(unsigne
{
unsigned long nid;
+ printk("free_area_init_nodes(%lu, %lu, %lu, %lu)\n",
+ arch_max_dma_pfn, arch_max_dma32_pfn,
+ arch_max_low_pfn, arch_max_high_pfn);
+
/* Record where the zone boundaries are */
memset(arch_zone_lowest_possible_pfn, 0,
sizeof(arch_zone_lowest_possible_pfn));
@@ -1002,6 +1042,8 @@ void __init free_area_init_nodes(unsigne
arch_zone_lowest_possible_pfn[ZONE_HIGHMEM] = arch_max_low_pfn;
arch_zone_highest_possible_pfn[ZONE_HIGHMEM] = arch_max_high_pfn;
+ printk("free_area_init_nodes(): find_min_pfn = %lu\n", find_min_pfn());
+
/* Regions in the early_node_map can be in any order */
sort_node_map();
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2006-04-12 23:22 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-12 23:20 [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V2 Mel Gorman
2006-04-12 23:20 ` [PATCH 1/7] Introduce mechanism for registering active regions of memory Mel Gorman
2006-04-12 23:21 ` [PATCH 2/7] Have Power use add_active_range() and free_area_init_nodes() Mel Gorman
2006-04-12 23:21 ` [PATCH 3/7] Have x86 use add_active_range() and free_area_init_nodes Mel Gorman
2006-04-12 23:21 ` [PATCH 4/7] Have x86_64 " Mel Gorman
2006-04-12 23:22 ` [PATCH 5/7] Have ia64 " Mel Gorman
2006-04-12 23:22 ` [PATCH 6/7] Break out memory initialisation code from page_alloc.c to mem_init.c Mel Gorman
2006-04-12 23:22 ` Mel Gorman [this message]
2006-04-12 23:53 ` [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V2 Andi Kleen
2006-04-13 0:22 ` Mel Gorman
2006-04-13 0:56 ` Andi Kleen
2006-04-13 1:08 ` Dave Hansen
2006-04-13 10:24 ` Mel Gorman
2006-04-13 9:52 ` Mel Gorman
2006-04-13 10:32 ` Yasunori Goto
2006-04-13 10:51 ` Mel Gorman
2006-04-13 17:19 ` Luck, Tony
2006-04-13 17:30 ` Mel Gorman
2006-04-13 17:47 ` Luck, Tony
2006-04-13 19:14 ` Mel Gorman
2006-04-13 21:53 ` Luck, Tony
2006-04-14 13:12 ` Mel Gorman
2006-04-14 20:53 ` Luck, Tony
2006-04-14 22:54 ` Mel Gorman
2006-04-14 23:17 ` Nigel Cunningham
2006-04-14 23:50 ` Mel Gorman
2006-04-18 13:00 [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V3 Mel Gorman
2006-04-18 13:02 ` [PATCH 7/7] Print out debugging information during initialisation Mel Gorman
2006-04-24 20:20 [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V4 Mel Gorman
2006-04-24 20:22 ` [PATCH 7/7] Print out debugging information during initialisation Mel Gorman
2006-05-01 13:35 [PATCH 0/7] Sizing zones and holes in an architecture independent manner V5 Mel Gorman
2006-05-01 13:37 ` [PATCH 7/7] Print out debugging information during initialisation Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060412232257.18862.80856.sendpatchset@skynet \
--to=mel@csn.ul.ie \
--cc=ak@suse.de \
--cc=bob.picco@hp.com \
--cc=davej@codemonkey.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox