From: Adrian Bunk <bunk@fs.tum.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.6.1-mm4
Date: Sat, 17 Jan 2004 03:22:23 +0100 [thread overview]
Message-ID: <20040117022222.GI12027@fs.tum.de> (raw)
In-Reply-To: <20040115225948.6b994a48.akpm@osdl.org>
On Thu, Jan 15, 2004 at 10:59:48PM -0800, Andrew Morton wrote:
>...
> - There's a patch here which changes the ia32 CPU type selection. Make
> sure you go in there and select the right CPU type(s), else the kernel
> won't compile. We might need to set a default here.
>...
Hi Andrew,
thanks for including my patch to give it further testing, and also
thanks for this suggestion.
The patch below lets all cpu options default to "y".
cu
Adrian
--- linux-2.6.1-mm4/arch/i386/Kconfig.old 2004-01-17 02:13:22.000000000 +0100
+++ linux-2.6.1-mm4/arch/i386/Kconfig 2004-01-17 02:14:51.000000000 +0100
@@ -147,11 +147,13 @@
config CPU_386
bool "386"
+ default y
help
Select this for a 386 series processor.
config CPU_486
bool "486"
+ default y
help
Select this for a 486 series processor, either Intel or one of the
compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
@@ -160,6 +162,7 @@
config CPU_586
bool "586/K5/5x86/6x86/6x86MX"
+ default y
help
Select this for a non-Intel 586 or 686 series processor such as
the AMD K5 or the Cyrix 6x86MX.
@@ -173,41 +176,48 @@
config CPU_586TSC
bool "Pentium-Classic"
+ default y
help
Select this for a Pentium Classic processor with the RDTSC (Read
Time Stamp Counter) instruction.
config CPU_586MMX
bool "Pentium-MMX"
+ default y
help
Select this for a Pentium with the MMX graphics/multimedia
extended instructions.
config CPU_686
bool "Pentium-Pro"
+ default y
help
Select this for Intel Pentium Pro chips.
config CPU_PENTIUMII
bool "Pentium-II/Celeron(pre-Coppermine)"
+ default y
help
Select this for Intel chips based on the Pentium-II and
pre-Coppermine Celeron core.
config CPU_PENTIUMIII
bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+ default y
help
Select this for Intel chips based on the Pentium-III and
Celeron-Coppermine core.
config CPU_PENTIUMM
bool "Pentium M"
+ default y
help
Select this for Intel Pentium M (not Pentium-4 M)
notebook chips.
config CPU_PENTIUM4
bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+ default y
help
Select this for Intel Pentium 4 chips. This includes
the Pentium 4, P4-based Celeron and Xeon, and
@@ -215,42 +225,50 @@
config CPU_K6
bool "K6/K6-II/K6-III"
+ default y
help
Select this for an AMD K6, K6-II or K6-III (aka K6-3D).
config CPU_K7
bool "Athlon/Duron/K7"
+ default y
help
Select this for an AMD Athlon K7-family processor.
config CPU_K8
bool "Opteron/Athlon64/Hammer/K8"
+ default y
help
Select this for an AMD Opteron or Athlon64 Hammer-family processor.
config CPU_CRUSOE
bool "Crusoe"
+ default y
help
Select this for a Transmeta Crusoe processor.
config CPU_WINCHIPC6
bool "Winchip-C6"
+ default y
help
Select this for an IDT Winchip C6 chip.
config CPU_WINCHIP2
bool "Winchip-2"
+ default y
help
Select this for an IDT Winchip-2.
config CPU_WINCHIP3D
bool "Winchip-2A/Winchip-3"
+ default y
help
Select this for an IDT Winchip-2A or 3 with 3dNow!
capabilities.
config CPU_CYRIXIII
bool "Cyrix III/VIA C3"
+ default y
help
Select this for a Cyrix III or VIA C3 chip.
@@ -259,6 +277,7 @@
config CPU_VIAC3_2
bool "VIA C3-2 (Nehemiah)"
+ default y
help
Select this for a VIA C3 "Nehemiah" (model 9 and above).
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"aart@kvack.org"> aart@kvack.org </a>
next prev parent reply other threads:[~2004-01-17 2:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-16 6:59 2.6.1-mm4 Andrew Morton
2004-01-16 9:34 ` 2.6.1-mm4 Prakash K. Cheemplavam
2004-01-21 18:46 ` 2.6.1-mm4 Prakash K. Cheemplavam
2004-01-21 19:20 ` 2.6.1-mm4 Valdis.Kletnieks
2004-01-16 13:45 ` 2.6.1-mm4 Ed Tomlinson
2004-01-16 17:32 ` 2.6.1-mm4 Thomas Schlichter
2004-01-16 14:49 ` 2.6.1-mm4 Fabian Fenaut
2004-01-16 14:49 ` 2.6.1-mm4 Fabian Fenaut
[not found] ` <200401161449.i0GEnoAv026627@fire-1.osdl.org>
2004-01-16 17:03 ` 2.6.1-mm4 Andrew Morton
2004-01-16 17:14 ` 2.6.1-mm4 (compile stats) John Cherry
2004-01-16 17:37 ` 2.6.1-mm4 Thomas Schlichter
2004-01-16 17:58 ` 2.6.1-mm4 Thomas Schlichter
2004-01-16 18:17 ` Oops in register_proc_table (2.6.1-mm4) Thomas Schlichter
2004-01-17 2:22 ` Adrian Bunk [this message]
2004-01-19 11:00 ` 2.6.1-mm4 same sound oops as mm3 Helge Hafting
2004-01-19 11:46 ` 2.6.1-mm4 Luiz Fernando Capitulino
2004-01-20 0:26 ` 2.6.1-mm4 Thomas Molina
2004-01-20 0:57 ` 2.6.1-mm4 Andrew Morton
2004-01-20 2:13 ` 2.6.1-mm4 Thomas Molina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040117022222.GI12027@fs.tum.de \
--to=bunk@fs.tum.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox