linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Schlichter <schlicht@uni-mannheim.de>
To: Andrew Morton <akpm@digeo.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: [2.5.70-mm8] NETDEV WATCHDOG: eth0: transmit timed out
Date: Wed, 11 Jun 2003 15:16:44 +0200	[thread overview]
Message-ID: <200306111516.46648.schlicht@uni-mannheim.de> (raw)
In-Reply-To: <200306111356.52950.schlicht@uni-mannheim.de>


[-- Attachment #1.1: Type: text/plain, Size: 777 bytes --]

Hi,

it seems that whether the netdevice nor the 8139too parts of the kernel cause 
my problems but there must have been some bad changes to the interrupt 
routing or the IO-APIC parts.

I don't have -mm7 handy currently (but at the moment it compiles again) but I 
attached the contents of /proc/interrupts of 2.4.10 (the system I currently 
run) and 2.5.70-mm8 again.

As you can see there, the -mm8 code does not assign more than 16 interrupt 
sinks but the 2.4.10 (and if I remember correctly -mm7, too) has 22. Perhaps 
even more problematic is that -mm8 seems not to use level-triggered 
interrupts...!

I could try to revert some IRQ or APIC changes if someone could tell me which 
Changeset may have caused that...

Best reagrds
  Thomas Schlichter

[-- Attachment #1.2: interrupts-2.4.10.txt --]
[-- Type: text/plain, Size: 646 bytes --]

           CPU0       
  0:     184641    IO-APIC-edge  timer
  1:       2037    IO-APIC-edge  keyboard
  2:          0          XT-PIC  cascade
  4:          2    IO-APIC-edge  serial
  8:          2    IO-APIC-edge  rtc
 12:      78366    IO-APIC-edge  PS/2 Mouse
 14:     188581    IO-APIC-edge  ide0
 15:          6    IO-APIC-edge  ide1
 16:     180617   IO-APIC-level  nvidia
 17:      14155   IO-APIC-level  eth0
 18:      82091   IO-APIC-level  EMU10K1
 19:     457792   IO-APIC-level  fcpci
 21:          0   IO-APIC-level  usb-uhci, usb-uhci, usb-uhci
NMI:          0 
LOC:     184592 
ERR:          0
MIS:          0

[-- Attachment #1.3: interrupts-2.5.70-mm8.txt --]
[-- Type: text/plain, Size: 613 bytes --]

           CPU0       
  0:      52599    IO-APIC-edge  timer
  1:       1075    IO-APIC-edge  i8042
  2:          0          XT-PIC  cascade
  4:         11    IO-APIC-edge  serial
  5:          0    IO-APIC-edge  uhci-hcd
  8:          2    IO-APIC-edge  rtc
  9:          0    IO-APIC-edge  acpi
 10:          0    IO-APIC-edge  ehci-hcd
 11:          0    IO-APIC-edge  eth0, EMU10K1, bttv0, uhci-hcd, uhci-hcd
 12:         79    IO-APIC-edge  i8042
 14:       6217    IO-APIC-edge  ide0
 15:         10    IO-APIC-edge  ide1
NMI:          0 
LOC:      52557 
ERR:          0
MIS:          0

[-- Attachment #2: signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

  reply	other threads:[~2003-06-11 13:16 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-06-11  8:33 2.5.70-mm8 Andrew Morton
2003-06-11  9:17 ` 2.5.70-mm8 Stefano Rivoir
2003-06-11  9:27   ` 2.5.70-mm8 Andrew Morton
2003-06-11  9:31   ` 2.5.70-mm8 Thomas Schlichter
2003-06-11 10:13 ` [PATCH] Compile fix for 2.5.70-mm8/drivers/usb/media/vicam.c Thomas Schlichter
2003-06-11 11:08 ` 2.5.70-mm8 - RAID1 and fb works! Helge Hafting
2003-06-11 15:57   ` Helge Hafting
2003-06-11 11:56 ` [2.5.70-mm8] NETDEV WATCHDOG: eth0: transmit timed out Thomas Schlichter
2003-06-11 13:16   ` Thomas Schlichter [this message]
2003-06-11 15:25     ` Thomas Schlichter
2003-06-11 18:56       ` Andrew Morton
2003-06-12 11:59         ` Thomas Schlichter
2003-06-12  5:20 ` 2.5.70-mm8 Jordan Breeding
2003-06-12  5:31   ` 2.5.70-mm8 Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200306111516.46648.schlicht@uni-mannheim.de \
    --to=schlicht@uni-mannheim.de \
    --cc=akpm@digeo.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox