From: Ed Tomlinson <tomlins@cam.org>
To: Andrew Morton <akpm@digeo.com>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.5.70-mm1
Date: Tue, 27 May 2003 16:33:40 -0400 [thread overview]
Message-ID: <200305271633.40421.tomlins@cam.org> (raw)
In-Reply-To: <200305271238.25935.m.c.p@wolk-project.de>
Hi Andrew,
This one oops on boot 2 out of 3 tries.
Ideas?
Ed
Linux version 2.5.70-mm1 (ed@oscar) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue May 27 11:52:56 EDT 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=Linux ro root=2103 console=tty0 console=ttyS0,38400 idebus=33 profile=1
ide_setup: idebus=33
kernel profiling enabled
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 400.974 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 790.52 BogoMIPS
Memory: 512884k/524224k available (1450k kernel code, 10580k reserved, 739k data, 112k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
Enabling new style K6 write allocation for 511 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 256K (32 bytes/line)
CPU: AMD-K6(tm) 3D+ Processor stepping 01
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc160
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc188, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=15500 from BIOS
radeonfb: probed DDR SGRAM 65536k videoram
radeonfb: ATI Radeon VE QY DDR SGRAM 64 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
radeonfb_pci_register END
hStart = 664, hEnd = 760, hTotal = 800
vStart = 491, vEnd = 493, vTotal = 525
h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2
v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea
post div = 0x8
fb_div = 0x1bf
ppll_div_3 = 0x301bf
ron = 1040, roff = 22092
vclk_freq = 2514, per = 789
Console: switching to colour frame buffer device 80x60
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA MVP3 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized radeon 1.8.0 20020828 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: AOPEN 16XDVD-ROM/AMH 20020328, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6Y080L0, ATA DISK drive
anticipatory scheduling elevator
anticipatory scheduling elevator
ide1 at 0x170-0x177,0x376 on irq 15
PDC20267: IDE controller at PCI slot 00:09.0
PCI: Found IRQ 12 for device 00:09.0
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: ROM enabled at 0xef000000
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:DMA
hde: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide2 at 0xac00-0xac07,0xb002 on irq 12
hdg: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide3 at 0xb400-0xb407,0xb802 on irq 12
hda: max request size: 128KiB
hda: host protected area => 1
hda: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdd: max request size: 128KiB
hdd: host protected area => 1
hdd: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33)
hdd: hdd1
hde: max request size: 128KiB
hde: host protected area => 1
hde: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 >
hdg: max request size: 128KiB
hdg: host protected area => 1
hdg: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 >
Console: switching to colour frame buffer device 80x60
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 00:07.2: VIA Technologies, In USB
uhci-hcd 00:07.2: irq 10, io base 0000a400
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
found reiserfs format "3.6" with standard journal
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
Reiserfs journal params: device hde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hde3) for (hde3)
hub 1-1:0: USB hub found
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
hub 1-1:0: 4 ports detected
Freeing unused kernel memory: 112k freed
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
INIT: version 2.84 booting
hub 1-0:0: new USB device on port 2, assigned address 3
hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 1, assigned address 4
hub 1-1:0: debounce: port 4: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 4, assigned address 5
Loading /etc/console/boottime.kmap.gz
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse(R) Optical] on usb-00:07.2-2
drivers/usb/core/usb.c: registered new driver hid
SCSI subsystem initialized
Initializing USB Mass Storage driver...
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
scsi0 : SCSI emulation for USB Mass Storage devices
anticipatory scheduling elevator
Vendor: Sandisk Model: ImageMate SDDR-0 Rev: 0208
Type: Direct-Access ANSI SCSI revision: 02
anticipatory scheduling elevator
anticipatory scheduling elevator
mice: PS/2 mouse device common for all mice
anticipatory scheduling elevator
anticipatory scheduling elevator
modprobe: WARNINpl2303: Unknown symbol usb_serial_disconnect
G: Error inserting usbserial (/lpl2303: Unknown symbol usb_serial_probe
ib/modules/2.5.70-mm1/kernel/drianticipatory scheduling elevator
vers/usb/serial/usbserial.ko): Fanticipatory scheduling elevator
ile exists
anticipatory scheduling elevator
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
pl2303: Unknown symbol usb_serial_register
pl2303: Unknown symbol usb_serial_deregister
Unable to handle kernel paging request at virtual address e48e11fc
printing eip:
c01296b9
*pde = 1fd6d067
*pte = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c01296b9>] Not tainted VLI
EFLAGS: 00010282
EIP is at load_module+0x7c5/0x800
eax: e48e1120 ebx: e48e1120 ecx: dffea948 edx: dffea958
esi: fffffffe edi: e48e1120 ebp: df3aff98 esp: df3aff2c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 128, threadinfo=df3ae000 task=df3d12d0)
Stack: df3ae000 c02c321c 00000000 e48e0ae0 0000002c 0000004c 00000048 3ed3bc9b
e48d0000 e48e1120 00000000 00000000 00000000 00000000 00000008 0000000d
0000000b 00000000 00000000 00000000 00000013 00000012 e48ef38c df76eb7c
Call Trace:
[<c012976e>] sys_init_module+0x7a/0x240
[<c0108da7>] syscall_call+0x7/0xb
Code: 45 b8 eb 58 8b 5d b8 53 e8 d5 ea ff ff ff 73 6c 53 e8 d4 8a fe ff 83 c4 0c 8b 7d b8 ff 77 70 57 e8 c5 8a fe ff 83 c4 08 8b 45 b8 <83> b8 dc 00 00 00 00 74 08 0f 0b 61 01 59 4b 27 c0 8b 55 f0 52
Activating swap.
<6>Adding 393552k swap on /dev/hda1. Priority:1 extents:1
Adding 393584k swap on /dev/hde1. Priority:1 extents:1
Adding 393584k swap on /dev/hdg1. Priority:1 extents:1
modprobe: FATAL: Module rtc not found.
System time was Tue May 27 19:43:14 UTC 2003.
Setting the System Clock using the Hardware Clock as reference...
modprobe: FATAL: Module rtc not found.
modprobe: FATAL: Module rtc not found.
System Clock set. System local time is now Tue May 27 15:43:16 EDT 2003.
Running 0dns-down to make sure resolv.conf is ok...done.
Loading modules: tulipwarning: process `update' used the obsolete bdflush system call
Fix your initscripts?
Linux version 2.5.70-mm1 (ed@oscar) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue May 27 11:52:56 EDT 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=Linux ro root=2103 console=tty0 console=ttyS0,38400 idebus=33 profile=1
ide_setup: idebus=33
kernel profiling enabled
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 400.936 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 790.52 BogoMIPS
Memory: 512884k/524224k available (1450k kernel code, 10580k reserved, 739k data, 112k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
Enabling new style K6 write allocation for 511 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 256K (32 bytes/line)
CPU: AMD-K6(tm) 3D+ Processor stepping 01
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc160
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc188, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=15500 from BIOS
radeonfb: probed DDR SGRAM 65536k videoram
radeonfb: ATI Radeon VE QY DDR SGRAM 64 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
radeonfb_pci_register END
hStart = 664, hEnd = 760, hTotal = 800
vStart = 491, vEnd = 493, vTotal = 525
h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2
v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea
post div = 0x8
fb_div = 0x1bf
ppll_div_3 = 0x301bf
ron = 1040, roff = 22092
vclk_freq = 2514, per = 789
Console: switching to colour frame buffer device 80x60
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA MVP3 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized radeon 1.8.0 20020828 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: AOPEN 16XDVD-ROM/AMH 20020328, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6Y080L0, ATA DISK drive
anticipatory scheduling elevator
anticipatory scheduling elevator
ide1 at 0x170-0x177,0x376 on irq 15
PDC20267: IDE controller at PCI slot 00:09.0
PCI: Found IRQ 12 for device 00:09.0
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: ROM enabled at 0xef000000
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:DMA
hde: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide2 at 0xac00-0xac07,0xb002 on irq 12
hdg: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide3 at 0xb400-0xb407,0xb802 on irq 12
hda: max request size: 128KiB
hda: host protected area => 1
hda: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdd: max request size: 128KiB
hdd: host protected area => 1
hdd: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33)
hdd: hdd1
hde: max request size: 128KiB
hde: host protected area => 1
hde: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 >
hdg: max request size: 128KiB
hdg: host protected area => 1
hdg: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 >
Console: switching to colour frame buffer device 80x60
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 00:07.2: VIA Technologies, In USB
uhci-hcd 00:07.2: irq 10, io base 0000a400
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
found reiserfs format "3.6" with standard journal
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
Reiserfs journal params: device hde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hde3) for (hde3)
hub 1-1:0: USB hub found
hub 1-1:0: 4 ports detected
reiserfs: replayed 1 transactions in 0 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
INIT: version 2.84 booting
hub 1-0:0: new USB device on port 2, assigned address 3
hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 1, assigned address 4
hub 1-1:0: debounce: port 4: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 4, assigned address 5
Loading /etc/console/boottime.kmap.gz
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse(R) Optical] on usb-00:07.2-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Dmodprobe: WARNIN<4>pl2303: Unknown symbol usb_serial_disconnect
G: Error inserting usbserial (/lpl2303: Unknowriver core v2.0
n symbol usb_serial_probe
ib/modules/2.5.70-mm1/kernel/dripl2303: Unknown symbol usb_serial_register
vers/usb/serial/usbserial.ko): Fpl2303: Unknown symbol usb_serial_deregister
ile exists
Unable to handle kernel paging request at virtual address e48ea1fc
printing eip:
c01296b9
*pde = 1fd6d067
*pte = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c01296b9>] Not tainted VLI
EFLAGS: 00010282
EIP is at load_module+0x7c5/0x800
eax: e48ea120 ebx: e48ea120 ecx: dffea948 edx: dffea958
esi: fffffffe edi: e48ea120 ebp: df36ff98 esp: df36ff2c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 118, threadinfo=df36e000 task=df3812d0)
Stack: df36e000 c02c321c 00000000 e48e9ae0 0000002c 0000004c 00000048 3ed3bc9b
e48d2000 e48ea120 00000000 00000000 00000000 00000000 00000008 0000000d
0000000b 00000000 00000000 00000000 00000013 00000012 e48d038c df6b7444
Call Trace:
[<c012976e>] sys_init_module+0x7a/0x240
[<c0108da7>] syscall_call+0x7/0xb
Code: 45 b8 eb 58 8b 5d b8 53 e8 d5 ea ff ff ff 73 6c 53 e8 d4 8a fe ff 83 c4 0c 8b 7d b8 ff 77 70 57 e8 c5 8a fe ff 83 c4 08 8b 45 b8 <83> b8 dc 00 00 00 00 74 08 0f 0b 61 01 59 4b 27 c0 8b 55 f0 52
Activating swap.
-----------------
putting the above Code: thru ksymoops, gives:
Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????>
00000000 <_EIP>:
Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????>
0: 45 inc %ebp
Code; ffffffd6 <__kernel_rt_sigreturn+1b96/????>
1: b8 eb 58 8b 5d mov $0x5d8b58eb,%eax
Code; ffffffdb <__kernel_rt_sigreturn+1b9b/????>
6: b8 53 e8 d5 ea mov $0xead5e853,%eax
Code; ffffffe0 <__kernel_rt_sigreturn+1ba0/????>
b: ff (bad)
Code; ffffffe1 <__kernel_rt_sigreturn+1ba1/????>
c: ff (bad)
Code; ffffffe2 <__kernel_rt_sigreturn+1ba2/????>
d: ff 73 6c pushl 0x6c(%ebx)
Code; ffffffe5 <__kernel_rt_sigreturn+1ba5/????>
10: 53 push %ebx
Code; ffffffe6 <__kernel_rt_sigreturn+1ba6/????>
11: e8 d4 8a fe ff call fffe8aea <_EIP+0xfffe8aea>
Code; ffffffeb <__kernel_rt_sigreturn+1bab/????>
16: 83 c4 0c add $0xc,%esp
Code; ffffffee <__kernel_rt_sigreturn+1bae/????>
19: 8b 7d b8 mov 0xffffffb8(%ebp),%edi
Code; fffffff1 <__kernel_rt_sigreturn+1bb1/????>
1c: ff 77 70 pushl 0x70(%edi)
Code; fffffff4 <__kernel_rt_sigreturn+1bb4/????>
1f: 57 push %edi
Code; fffffff5 <__kernel_rt_sigreturn+1bb5/????>
20: e8 c5 8a fe ff call fffe8aea <_EIP+0xfffe8aea>
Code; fffffffa <__kernel_rt_sigreturn+1bba/????>
25: 83 c4 08 add $0x8,%esp
Code; fffffffd <__kernel_rt_sigreturn+1bbd/????>
28: 8b 45 b8 mov 0xffffffb8(%ebp),%eax
Code; 00000000 Before first symbol
2b: 83 b8 dc 00 00 00 00 cmpl $0x0,0xdc(%eax)
Code; 00000007 Before first symbol
32: 74 08 je 3c <_EIP+0x3c>
Code; 00000009 Before first symbol
34: 0f 0b ud2a
Code; 0000000b Before first symbol
36: 61 popa
Code; 0000000c Before first symbol
37: 01 59 4b add %ebx,0x4b(%ecx)
Code; 0000000f Before first symbol
3a: 27 daa
Code; 00000010 Before first symbol
3b: c0 .byte 0xc0
Code; 00000011 Before first symbol
3c: 8b 55 f0 mov 0xfffffff0(%ebp),%edx
Code; 00000014 Before first symbol
3f: 52 push %edx
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"aart@kvack.org"> aart@kvack.org </a>
next prev parent reply other threads:[~2003-05-27 20:33 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-27 7:42 2.5.70-mm1 Andrew Morton
2003-05-27 10:38 ` 2.5.70-mm1 Marc-Christian Petersen
2003-05-27 20:33 ` Ed Tomlinson [this message]
2003-05-27 20:49 ` 2.5.70-mm1 Andrew Morton
2003-05-27 23:05 ` 2.5.70-mm1 Ed Tomlinson
2003-05-28 17:10 ` 2.5.70-mm1 Mingming Cao
2003-05-28 19:44 ` 2.5.70-mm1 Andrew Morton
2003-05-29 6:23 ` 2.5.70-mm1 Martin J. Bligh
2003-05-29 18:40 ` 2.5.70-mm1 Martin J. Bligh
2003-05-29 18:52 ` 2.5.70-mm1 Andrew Morton
2003-05-29 20:30 ` 2.5.70-mm1 Martin J. Bligh
2003-05-29 21:14 ` 2.5.70-mm1 Andrew Morton
2003-05-30 15:51 ` 2.5.70-mm1 Martin J. Bligh
2003-05-30 16:43 ` 2.5.70-mm1 Andrew Morton
2003-05-30 23:51 ` 2.5.70-mm1 Martin J. Bligh
2003-06-03 6:34 ` ext3 semaphore tracing Martin J. Bligh
2003-05-28 13:26 2.5.70-mm1 Downing, Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200305271633.40421.tomlins@cam.org \
--to=tomlins@cam.org \
--cc=akpm@digeo.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox