From: John Hubbard <jhubbard@nvidia.com>
To: Peter Xu <peterx@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Paolo Bonzini <pbonzini@redhat.com>,
Andrew Morton <akpm@linux-foundation.org>,
David Hildenbrand <david@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
Andrea Arcangeli <aarcange@redhat.com>,
Linux MM Mailing List <linux-mm@kvack.org>,
Sean Christopherson <seanjc@google.com>
Subject: Re: [PATCH 1/4] mm/gup: Add FOLL_INTERRUPTIBLE
Date: Wed, 29 Jun 2022 18:53:30 -0700 [thread overview]
Message-ID: <17f9eae0-01bb-4793-201e-16ee267c07f2@nvidia.com> (raw)
In-Reply-To: <Yrx0ETyb2kk4fO4M@xz-m1.local>
On 6/29/22 08:47, Peter Xu wrote:
>> It looks like part of this comment is trying to document a pre-existing
>> concept, which is that faultin_page() only ever sets FAULT_FLAG_KILLABLE
>> if locked != NULL.
>
> I'd say that's not what I wanted to comment.. I wanted to express that
> INTERRUPTIBLE should rely on KILLABLE, that's also why I put the comment to
> be after KILLABLE, not before. IMHO it makes sense already to have
> "interruptible" only if "killable", no matter what's the pre-requisite for
> KILLABLE (in this case it's having "locked" being non-null).
>
OK, I think I finally understand both the intention of the comment,
and (thanks to your notes, below) the interaction between *locked and
_RETRY, _KILLABLE, and _INTERRUPTIBLE. Really appreciate your leading
me by the nose through that. The pre-existing code is abusing *locked
a bit, by treating it as a flag when really it is a side effect of
flags, but at least now that's clear to me.
Anyway...this leads to finally getting into the comment, which I now
think is not quite what we want: there is no need for a hierarchy of
"_INTERRUPTIBLE should depend upon _KILLABLE". That is: even though an
application allows a fatal signal to get through, it's not clear to me
that that implies that non-fatal signal handling should be prevented.
The code is only vaguely enforcing such a thing, because it just so
happens that both cases require the same basic prerequisites. So the
code looks good, but I don't see a need to claim a hierarchy in the
comments.
So I'd either delete the comment entirely, or go with something that is
doesn't try to talk about hierarchy nor locked/retry either. Does this
look reasonable to you:
/*
* FAULT_FLAG_INTERRUPTIBLE is opt-in: kernel callers must set
* FOLL_INTERRUPTIBLE. That's because some callers may not be
* prepared to handle early exits caused by non-fatal signals.
*/
?
>> The problem I am (personally) having is that I don't yet understand why
>> or how those are connected: what is it about having locked non-NULL that
>> means the process is killable? (Can you explain why that is?)
>
> Firstly RETRY_KILLABLE relies on ALLOW_RETRY, because if we don't allow
> retry at all it means we'll never wait in handle_mm_fault() anyway, then no
> need to worry on being interrupted by any kind of signal (fatal or not).
>
> Then if we allow retry, we need some way to know "whether mmap_sem is
> released or not" during the process for the caller (because the caller
> cannot see VM_FAULT_RETRY). That's why we added "locked" parameter, so
> that we can set *locked=false to tell the caller we have released mmap_sem.
>
> I think that's why we have "locked" defined as "we allow this page fault
> request to retry and wait, during wait we can always allow fatal signals".
> I think that's defined throughout the gup call interfaces too, and
> faultin_page() is the last step to talk to handle_mm_fault().
>
> To make this whole picture complete, NOWAIT is another thing that relies on
> ALLOW_RETRY but just to tell "oh please never release the mmap_sem at all".
> For example, when we want to make sure no vma will be released after
> faultin_page() returned.
>
Again, thanks for taking the time to explain that for me. :)
>>
>> If that were clear, I think I could suggest a good comment wording.
>
> IMHO it's a little bit weird to explain "locked" here, especially after
> KILLABLE is set, that's why I didn't try to mention "locked" in my 2nd
> attempt. There are some comments for "locked" above the definition of
> faultin_page(), I think that'll be a nicer place to enrich explanations for
> "locked", and it seems even more suitable as a separate patch?
>
Totally agreed. I didn't intend to ask for that kind of documentation
here.
For that, I'm thinking a combination of cleaning up *locked a little
bit, plus maybe some higher level notes like what you wrote above, added
to either pin_user_pages.rst or a new get_user_pages.rst or some .rst
anyway. Definitely a separately thing.
thanks,
--
John Hubbard
NVIDIA
next prev parent reply other threads:[~2022-06-30 1:53 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-22 21:36 [PATCH 0/4] kvm/mm: Allow GUP to respond to non fatal signals Peter Xu
2022-06-22 21:36 ` [PATCH 1/4] mm/gup: Add FOLL_INTERRUPTIBLE Peter Xu
2022-06-25 0:35 ` Jason Gunthorpe
2022-06-25 1:23 ` Peter Xu
2022-06-25 23:59 ` Jason Gunthorpe
2022-06-27 15:29 ` Peter Xu
2022-06-28 2:07 ` John Hubbard
2022-06-28 19:31 ` Peter Xu
2022-06-28 21:40 ` John Hubbard
2022-06-28 22:33 ` Peter Xu
2022-06-29 0:31 ` John Hubbard
2022-06-29 15:47 ` Peter Xu
2022-06-30 1:53 ` John Hubbard [this message]
2022-06-30 13:49 ` Peter Xu
2022-06-30 19:01 ` John Hubbard
2022-06-30 21:27 ` Peter Xu
2022-07-04 22:48 ` Matthew Wilcox
2022-07-07 15:06 ` Peter Xu
2022-06-22 21:36 ` [PATCH 2/4] kvm: Merge "atomic" and "write" in __gfn_to_pfn_memslot() Peter Xu
2022-06-23 14:49 ` Sean Christopherson
2022-06-23 19:46 ` Peter Xu
2022-06-23 20:29 ` Sean Christopherson
2022-06-23 21:29 ` Peter Xu
2022-06-23 21:52 ` Sean Christopherson
2022-06-27 19:12 ` John Hubbard
2022-06-28 2:17 ` John Hubbard
2022-06-28 19:46 ` Peter Xu
2022-06-28 21:52 ` John Hubbard
2022-06-28 22:50 ` Peter Xu
2022-06-28 22:55 ` John Hubbard
2022-06-28 23:02 ` Peter Xu
2022-06-22 21:36 ` [PATCH 3/4] kvm: Add new pfn error KVM_PFN_ERR_INTR Peter Xu
2022-06-23 14:31 ` Sean Christopherson
2022-06-23 19:32 ` Peter Xu
2022-06-22 21:36 ` [PATCH 4/4] kvm/x86: Allow to respond to generic signals during slow page faults Peter Xu
2022-06-23 14:46 ` Sean Christopherson
2022-06-23 19:31 ` Peter Xu
2022-06-23 20:07 ` Sean Christopherson
2022-06-23 20:18 ` Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17f9eae0-01bb-4793-201e-16ee267c07f2@nvidia.com \
--to=jhubbard@nvidia.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=david@redhat.com \
--cc=dgilbert@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=seanjc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox