From: Zhenhua Huang <quic_zhenhuah@quicinc.com>
To: <catalin.marinas@arm.com>, <will@kernel.org>, <glider@google.com>,
<elver@google.com>, <dvyukov@google.com>,
<akpm@linux-foundation.org>, <robin.murphy@arm.com>,
<mark.rutland@arm.com>, <jianyong.wu@arm.com>,
<james.morse@arm.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>,
<linux-arm-kernel@lists.infradead.org>,
<kasan-dev@googlegroups.com>, <linux-mm@kvack.org>,
<quic_pkondeti@quicinc.com>, <quic_guptap@quicinc.com>,
<quic_tingweiz@quicinc.com>
Subject: [PATCH] mm,kfence: decouple kfence from page granularity mapping judgement
Date: Thu, 9 Mar 2023 16:05:22 +0800 [thread overview]
Message-ID: <1678349122-19279-1-git-send-email-quic_zhenhuah@quicinc.com> (raw)
Kfence only needs its pool to be mapped as page granularity, previous
judgement was a bit over protected. Decouple it from judgement and do
page granularity mapping for kfence pool only [1].
To implement this, also relocate the kfence pool allocation before the
linear mapping setting up, kfence_alloc_pool is to allocate phys addr,
__kfence_pool is to be set after linear mapping set up.
LINK: [1] https://lore.kernel.org/linux-arm-kernel/1675750519-1064-1-git-send-email-quic_zhenhuah@quicinc.com/T/
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
---
arch/arm64/mm/mmu.c | 24 ++++++++++++++++++++++++
arch/arm64/mm/pageattr.c | 5 ++---
include/linux/kfence.h | 10 ++++++++--
init/main.c | 1 -
mm/kfence/core.c | 18 ++++++++++++++----
5 files changed, 48 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 6f9d889..bd79691 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -24,6 +24,7 @@
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/set_memory.h>
+#include <linux/kfence.h>
#include <asm/barrier.h>
#include <asm/cputype.h>
@@ -532,6 +533,9 @@ static void __init map_mem(pgd_t *pgdp)
phys_addr_t kernel_end = __pa_symbol(__init_begin);
phys_addr_t start, end;
int flags = NO_EXEC_MAPPINGS;
+#ifdef CONFIG_KFENCE
+ phys_addr_t kfence_pool = 0;
+#endif
u64 i;
/*
@@ -564,6 +568,12 @@ static void __init map_mem(pgd_t *pgdp)
}
#endif
+#ifdef CONFIG_KFENCE
+ kfence_pool = kfence_alloc_pool();
+ if (kfence_pool)
+ memblock_mark_nomap(kfence_pool, KFENCE_POOL_SIZE);
+#endif
+
/* map all the memory banks */
for_each_mem_range(i, &start, &end) {
if (start >= end)
@@ -608,6 +618,20 @@ static void __init map_mem(pgd_t *pgdp)
}
}
#endif
+
+ /* Kfence pool needs page-level mapping */
+#ifdef CONFIG_KFENCE
+ if (kfence_pool) {
+ __map_memblock(pgdp, kfence_pool,
+ kfence_pool + KFENCE_POOL_SIZE,
+ pgprot_tagged(PAGE_KERNEL),
+ NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
+ memblock_clear_nomap(kfence_pool, KFENCE_POOL_SIZE);
+ /* kfence_pool really mapped now */
+ kfence_set_pool(kfence_pool);
+ }
+#endif
+
}
void mark_rodata_ro(void)
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
index 79dd201..61156d0 100644
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -22,12 +22,11 @@ bool rodata_full __ro_after_init = IS_ENABLED(CONFIG_RODATA_FULL_DEFAULT_ENABLED
bool can_set_direct_map(void)
{
/*
- * rodata_full, DEBUG_PAGEALLOC and KFENCE require linear map to be
+ * rodata_full and DEBUG_PAGEALLOC require linear map to be
* mapped at page granularity, so that it is possible to
* protect/unprotect single pages.
*/
- return (rodata_enabled && rodata_full) || debug_pagealloc_enabled() ||
- IS_ENABLED(CONFIG_KFENCE);
+ return (rodata_enabled && rodata_full) || debug_pagealloc_enabled();
}
static int change_page_range(pte_t *ptep, unsigned long addr, void *data)
diff --git a/include/linux/kfence.h b/include/linux/kfence.h
index 726857a..0252e74 100644
--- a/include/linux/kfence.h
+++ b/include/linux/kfence.h
@@ -61,7 +61,12 @@ static __always_inline bool is_kfence_address(const void *addr)
/**
* kfence_alloc_pool() - allocate the KFENCE pool via memblock
*/
-void __init kfence_alloc_pool(void);
+phys_addr_t __init kfence_alloc_pool(void);
+
+/**
+ * kfence_set_pool() - KFENCE pool mapped and can be used
+ */
+void __init kfence_set_pool(phys_addr_t addr);
/**
* kfence_init() - perform KFENCE initialization at boot time
@@ -223,7 +228,8 @@ bool __kfence_obj_info(struct kmem_obj_info *kpp, void *object, struct slab *sla
#else /* CONFIG_KFENCE */
static inline bool is_kfence_address(const void *addr) { return false; }
-static inline void kfence_alloc_pool(void) { }
+static inline phys_addr_t kfence_alloc_pool(void) { return (phys_addr_t)NULL; }
+static inline void kfence_set_pool(phys_addr_t addr) { }
static inline void kfence_init(void) { }
static inline void kfence_shutdown_cache(struct kmem_cache *s) { }
static inline void *kfence_alloc(struct kmem_cache *s, size_t size, gfp_t flags) { return NULL; }
diff --git a/init/main.c b/init/main.c
index 4425d17..9aaf217 100644
--- a/init/main.c
+++ b/init/main.c
@@ -839,7 +839,6 @@ static void __init mm_init(void)
*/
page_ext_init_flatmem();
init_mem_debugging_and_hardening();
- kfence_alloc_pool();
report_meminit();
kmsan_init_shadow();
stack_depot_early_init();
diff --git a/mm/kfence/core.c b/mm/kfence/core.c
index 5349c37..dd5cdd5 100644
--- a/mm/kfence/core.c
+++ b/mm/kfence/core.c
@@ -809,15 +809,25 @@ static void toggle_allocation_gate(struct work_struct *work)
/* === Public interface ===================================================== */
-void __init kfence_alloc_pool(void)
+phys_addr_t __init kfence_alloc_pool(void)
{
+ phys_addr_t kfence_pool;
if (!kfence_sample_interval)
- return;
+ return 0;
- __kfence_pool = memblock_alloc(KFENCE_POOL_SIZE, PAGE_SIZE);
+ kfence_pool = memblock_phys_alloc(KFENCE_POOL_SIZE, PAGE_SIZE);
- if (!__kfence_pool)
+ if (!kfence_pool) {
pr_err("failed to allocate pool\n");
+ return 0;
+ }
+
+ return kfence_pool;
+}
+
+void __init kfence_set_pool(phys_addr_t addr)
+{
+ __kfence_pool = phys_to_virt(addr);
}
static void kfence_init_enable(void)
--
2.7.4
next reply other threads:[~2023-03-09 8:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-09 8:05 Zhenhua Huang [this message]
2023-03-09 10:33 ` Marco Elver
2023-03-09 11:03 ` Zhenhua Huang
2023-03-09 11:09 ` Marco Elver
2023-03-09 11:26 ` Zhenhua Huang
2023-03-09 11:38 ` Marco Elver
2023-03-09 15:38 ` Zhenhua Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1678349122-19279-1-git-send-email-quic_zhenhuah@quicinc.com \
--to=quic_zhenhuah@quicinc.com \
--cc=akpm@linux-foundation.org \
--cc=catalin.marinas@arm.com \
--cc=dvyukov@google.com \
--cc=elver@google.com \
--cc=glider@google.com \
--cc=james.morse@arm.com \
--cc=jianyong.wu@arm.com \
--cc=kasan-dev@googlegroups.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mm@kvack.org \
--cc=mark.rutland@arm.com \
--cc=quic_guptap@quicinc.com \
--cc=quic_pkondeti@quicinc.com \
--cc=quic_tingweiz@quicinc.com \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox