linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: linux-cxl@vger.kernel.org
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>,
	vishal.l.verma@intel.com, dave.hansen@linux.intel.com,
	linux-mm@kvack.org, linux-acpi@vger.kernel.org
Subject: [PATCH v2 12/20] cxl/port: Split endpoint and switch port probe
Date: Fri, 10 Feb 2023 01:06:33 -0800	[thread overview]
Message-ID: <167601999378.1924368.15071142145866277623.stgit@dwillia2-xfh.jf.intel.com> (raw)
In-Reply-To: <167601992097.1924368.18291887895351917895.stgit@dwillia2-xfh.jf.intel.com>

Jonathan points out that the shared code between the switch and endpoint
case is small. Before adding another is_cxl_endpoint() conditional,
just split the two cases.

Rather than duplicate the "Couldn't enumerate decoders" error message
take the opportunity to improve the error messages in
devm_cxl_enumerate_decoders().

Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Link: http://lore.kernel.org/r/20230208170724.000067ec@Huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/cxl/core/hdm.c |   11 ++++++--
 drivers/cxl/port.c     |   69 +++++++++++++++++++++++++++---------------------
 2 files changed, 47 insertions(+), 33 deletions(-)

diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index dcc16d7cb8f3..a0891c3464f1 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -826,7 +826,8 @@ int devm_cxl_enumerate_decoders(struct cxl_hdm *cxlhdm)
 			cxled = cxl_endpoint_decoder_alloc(port);
 			if (IS_ERR(cxled)) {
 				dev_warn(&port->dev,
-					 "Failed to allocate the decoder\n");
+					 "Failed to allocate decoder%d.%d\n",
+					 port->id, i);
 				return PTR_ERR(cxled);
 			}
 			cxld = &cxled->cxld;
@@ -836,7 +837,8 @@ int devm_cxl_enumerate_decoders(struct cxl_hdm *cxlhdm)
 			cxlsd = cxl_switch_decoder_alloc(port, target_count);
 			if (IS_ERR(cxlsd)) {
 				dev_warn(&port->dev,
-					 "Failed to allocate the decoder\n");
+					 "Failed to allocate decoder%d.%d\n",
+					 port->id, i);
 				return PTR_ERR(cxlsd);
 			}
 			cxld = &cxlsd->cxld;
@@ -844,13 +846,16 @@ int devm_cxl_enumerate_decoders(struct cxl_hdm *cxlhdm)
 
 		rc = init_hdm_decoder(port, cxld, target_map, hdm, i, &dpa_base);
 		if (rc) {
+			dev_warn(&port->dev,
+				 "Failed to initialize decoder%d.%d\n",
+				 port->id, i);
 			put_device(&cxld->dev);
 			return rc;
 		}
 		rc = add_hdm_decoder(port, cxld, target_map);
 		if (rc) {
 			dev_warn(&port->dev,
-				 "Failed to add decoder to port\n");
+				 "Failed to add decoder%d.%d\n", port->id, i);
 			return rc;
 		}
 	}
diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c
index 5453771bf330..a8d46a67b45e 100644
--- a/drivers/cxl/port.c
+++ b/drivers/cxl/port.c
@@ -30,55 +30,64 @@ static void schedule_detach(void *cxlmd)
 	schedule_cxl_memdev_detach(cxlmd);
 }
 
-static int cxl_port_probe(struct device *dev)
+static int cxl_switch_port_probe(struct cxl_port *port)
 {
-	struct cxl_port *port = to_cxl_port(dev);
 	struct cxl_hdm *cxlhdm;
 	int rc;
 
+	rc = devm_cxl_port_enumerate_dports(port);
+	if (rc < 0)
+		return rc;
 
-	if (!is_cxl_endpoint(port)) {
-		rc = devm_cxl_port_enumerate_dports(port);
-		if (rc < 0)
-			return rc;
-		if (rc == 1)
-			return devm_cxl_add_passthrough_decoder(port);
-	}
+	if (rc == 1)
+		return devm_cxl_add_passthrough_decoder(port);
 
 	cxlhdm = devm_cxl_setup_hdm(port);
 	if (IS_ERR(cxlhdm))
 		return PTR_ERR(cxlhdm);
 
-	if (is_cxl_endpoint(port)) {
-		struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport);
-		struct cxl_dev_state *cxlds = cxlmd->cxlds;
+	return devm_cxl_enumerate_decoders(cxlhdm);
+}
 
-		/* Cache the data early to ensure is_visible() works */
-		read_cdat_data(port);
+static int cxl_endpoint_port_probe(struct cxl_port *port)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport);
+	struct cxl_dev_state *cxlds = cxlmd->cxlds;
+	struct cxl_hdm *cxlhdm;
+	int rc;
+
+	cxlhdm = devm_cxl_setup_hdm(port);
+	if (IS_ERR(cxlhdm))
+		return PTR_ERR(cxlhdm);
 
-		get_device(&cxlmd->dev);
-		rc = devm_add_action_or_reset(dev, schedule_detach, cxlmd);
-		if (rc)
-			return rc;
+	/* Cache the data early to ensure is_visible() works */
+	read_cdat_data(port);
 
-		rc = cxl_hdm_decode_init(cxlds, cxlhdm);
-		if (rc)
-			return rc;
+	get_device(&cxlmd->dev);
+	rc = devm_add_action_or_reset(&port->dev, schedule_detach, cxlmd);
+	if (rc)
+		return rc;
 
-		rc = cxl_await_media_ready(cxlds);
-		if (rc) {
-			dev_err(dev, "Media not active (%d)\n", rc);
-			return rc;
-		}
-	}
+	rc = cxl_hdm_decode_init(cxlds, cxlhdm);
+	if (rc)
+		return rc;
 
-	rc = devm_cxl_enumerate_decoders(cxlhdm);
+	rc = cxl_await_media_ready(cxlds);
 	if (rc) {
-		dev_err(dev, "Couldn't enumerate decoders (%d)\n", rc);
+		dev_err(&port->dev, "Media not active (%d)\n", rc);
 		return rc;
 	}
 
-	return 0;
+	return devm_cxl_enumerate_decoders(cxlhdm);
+}
+
+static int cxl_port_probe(struct device *dev)
+{
+	struct cxl_port *port = to_cxl_port(dev);
+
+	if (is_cxl_endpoint(port))
+		return cxl_endpoint_port_probe(port);
+	return cxl_switch_port_probe(port);
 }
 
 static ssize_t CDAT_read(struct file *filp, struct kobject *kobj,



  parent reply	other threads:[~2023-02-10  9:06 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-10  9:05 [PATCH v2 00/20] CXL RAM and the 'Soft Reserved' => 'System RAM' default Dan Williams
2023-02-10  9:05 ` [PATCH v2 01/20] cxl/memdev: Fix endpoint port removal Dan Williams
2023-02-10 17:28   ` Jonathan Cameron
2023-02-10 21:14     ` Dan Williams
2023-02-10 23:17   ` Verma, Vishal L
2023-02-10  9:05 ` [PATCH v2 02/20] cxl/Documentation: Update references to attributes added in v6.0 Dan Williams
2023-02-10  9:05 ` [PATCH v2 03/20] cxl/region: Add a mode attribute for regions Dan Williams
2023-02-10  9:05 ` [PATCH v2 04/20] cxl/region: Support empty uuids for non-pmem regions Dan Williams
2023-02-10 17:30   ` Jonathan Cameron
2023-02-10 23:34   ` Ira Weiny
2023-02-10  9:05 ` [PATCH v2 05/20] cxl/region: Validate region mode vs decoder mode Dan Williams
2023-02-10  9:05 ` [PATCH v2 06/20] cxl/region: Add volatile region creation support Dan Williams
2023-02-10  9:06 ` [PATCH v2 07/20] cxl/region: Refactor attach_target() for autodiscovery Dan Williams
2023-02-10  9:06 ` [PATCH v2 08/20] cxl/region: Cleanup target list on attach error Dan Williams
2023-02-10 17:31   ` Jonathan Cameron
2023-02-10 23:17   ` Verma, Vishal L
2023-02-10 23:46   ` Ira Weiny
2023-02-10  9:06 ` [PATCH v2 09/20] cxl/region: Move region-position validation to a helper Dan Williams
2023-02-10 17:34   ` Jonathan Cameron
2023-02-10  9:06 ` [PATCH v2 10/20] kernel/range: Uplevel the cxl subsystem's range_contains() helper Dan Williams
2023-02-10  9:06 ` [PATCH v2 11/20] cxl/region: Enable CONFIG_CXL_REGION to be toggled Dan Williams
2023-02-10  9:06 ` Dan Williams [this message]
2023-02-10 17:41   ` [PATCH v2 12/20] cxl/port: Split endpoint and switch port probe Jonathan Cameron
2023-02-10 23:21   ` Verma, Vishal L
2023-02-10  9:06 ` [PATCH v2 13/20] cxl/region: Add region autodiscovery Dan Williams
2023-02-10 18:09   ` Jonathan Cameron
2023-02-10 21:35     ` Dan Williams
2023-02-14 13:23       ` Jonathan Cameron
2023-02-14 16:43         ` Dan Williams
2023-02-10 21:49     ` Dan Williams
2023-02-11  0:29   ` Verma, Vishal L
2023-02-11  1:03     ` Dan Williams
     [not found]   ` <CGME20230213192752uscas1p1c49508da4b100c9ba6a1a3aa92ca03e5@uscas1p1.samsung.com>
2023-02-13 19:27     ` Fan Ni
     [not found]   ` <CGME20230228185348uscas1p1a5314a077383ee81ac228c1b9f1da2f8@uscas1p1.samsung.com>
2023-02-28 18:53     ` Fan Ni
2023-02-10  9:06 ` [PATCH v2 14/20] tools/testing/cxl: Define a fixed volatile configuration to parse Dan Williams
2023-02-10 18:12   ` Jonathan Cameron
2023-02-10 18:36   ` Dave Jiang
2023-02-11  0:39   ` Verma, Vishal L
2023-02-10  9:06 ` [PATCH v2 15/20] dax/hmem: Move HMAT and Soft reservation probe initcall level Dan Williams
2023-02-10 21:53   ` Dave Jiang
2023-02-10 21:57     ` Dave Jiang
2023-02-11  0:40   ` Verma, Vishal L
2023-02-10  9:06 ` [PATCH v2 16/20] dax/hmem: Drop unnecessary dax_hmem_remove() Dan Williams
2023-02-10 21:59   ` Dave Jiang
2023-02-11  0:41   ` Verma, Vishal L
2023-02-10  9:07 ` [PATCH v2 17/20] dax/hmem: Convey the dax range via memregion_info() Dan Williams
2023-02-10 22:03   ` Dave Jiang
2023-02-11  4:25   ` Verma, Vishal L
2023-02-10  9:07 ` [PATCH v2 18/20] dax/hmem: Move hmem device registration to dax_hmem.ko Dan Williams
2023-02-10 18:25   ` Jonathan Cameron
2023-02-10 22:09   ` Dave Jiang
2023-02-11  4:41   ` Verma, Vishal L
2023-02-10  9:07 ` [PATCH v2 19/20] dax: Assign RAM regions to memory-hotplug by default Dan Williams
2023-02-10 22:19   ` Dave Jiang
2023-02-11  5:57   ` Verma, Vishal L
2023-02-10  9:07 ` [PATCH v2 20/20] cxl/dax: Create dax devices for CXL RAM regions Dan Williams
2023-02-10 18:38   ` Jonathan Cameron
2023-02-10 22:42   ` Dave Jiang
2023-02-10 17:53 ` [PATCH v2 00/20] CXL RAM and the 'Soft Reserved' => 'System RAM' default Dan Williams
2023-02-11 14:04   ` Gregory Price
2023-02-13 18:22 ` Gregory Price
2023-02-13 18:31   ` Gregory Price
     [not found]     ` <CGME20230222214151uscas1p26d53b2e198f63a1f382fe575c6c25070@uscas1p2.samsung.com>
2023-02-22 21:41       ` Fan Ni
2023-02-22 22:18         ` Dan Williams
2023-02-14 13:35   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=167601999378.1924368.15071142145866277623.stgit@dwillia2-xfh.jf.intel.com \
    --to=dan.j.williams@intel.com \
    --cc=Jonathan.Cameron@Huawei.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox