From: NeilBrown <neilb@suse.de>
To: Trond Myklebust <trond.myklebust@hammerspace.com>,
Anna Schumaker <anna.schumaker@netapp.com>,
Chuck Lever <chuck.lever@oracle.com>,
Andrew Morton <akpm@linux-foundation.org>,
Mark Hemment <markhemm@googlemail.com>,
Christoph Hellwig <hch@infradead.org>,
David Howells <dhowells@redhat.com>
Cc: linux-nfs@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 05/21] MM: introduce ->swap_rw and use it for reads from SWP_FS_OPS swap-space
Date: Mon, 07 Feb 2022 15:46:01 +1100 [thread overview]
Message-ID: <164420916114.29374.8467297159548469912.stgit@noble.brown> (raw)
In-Reply-To: <164420889455.29374.17958998143835612560.stgit@noble.brown>
swap currently uses ->readpage to read swap pages. This can only
request one page at a time from the filesystem, which is not most
efficient.
swap uses ->direct_IO for writes which while this is adequate is an
inappropriate over-loading. ->direct_IO may need to had handle allocate
space for holes or other details that are not relevant for swap.
So this patch introduces a new address_space operation: ->swap_rw.
In this patch it is used for reads, and a subsequent patch will switch
writes to use it.
No filesystem yet supports ->swap_rw, but that is not a problem because
no filesystem actually works with filesystem-based swap.
Only two filesystems set SWP_FS_OPS:
- cifs sets the flag, but ->direct_IO always fails so swap cannot work.
- nfs sets the flag, but ->direct_IO calls generic_write_checks()
which has failed on swap files for several releases.
To ensure that a NULL ->swap_rw isn't called, ->activate_swap() for both
NFS and cifs are changed to fail if ->swap_rw is not set. This can be
removed if/when the function is added.
Future patches will restore swap-over-NFS functionality.
To submit an async read with ->swap_rw() we need to allocate a structure
to hold the kiocb and other details. swap_readpage() cannot handle
transient failure, so we create a mempool to provide the structures.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
---
fs/cifs/file.c | 4 +++
fs/nfs/file.c | 4 +++
include/linux/fs.h | 1 +
mm/page_io.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++-----
mm/swap.h | 1 +
mm/swapfile.c | 5 ++++
6 files changed, 77 insertions(+), 6 deletions(-)
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index fe49f1cab018..6ae5b404b04b 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -4889,6 +4889,10 @@ static int cifs_swap_activate(struct swap_info_struct *sis,
cifs_dbg(FYI, "swap activate\n");
+ if (!swap_file->f_mapping->a_ops->swap_rw)
+ /* Cannot support swap */
+ return -EINVAL;
+
spin_lock(&inode->i_lock);
blocks = inode->i_blocks;
isize = inode->i_size;
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index d5aa55c7edb0..3dbef2c31567 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -492,6 +492,10 @@ static int nfs_swap_activate(struct swap_info_struct *sis, struct file *file,
struct rpc_clnt *clnt = NFS_CLIENT(file->f_mapping->host);
struct inode *inode = file->f_mapping->host;
+ if (!file->f_mapping->a_ops->swap_rw)
+ /* Cannot support swap */
+ return -EINVAL;
+
spin_lock(&inode->i_lock);
blocks = inode->i_blocks;
isize = inode->i_size;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index e2d892b201b0..57e3b387cb17 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -409,6 +409,7 @@ struct address_space_operations {
int (*swap_activate)(struct swap_info_struct *sis, struct file *file,
sector_t *span);
void (*swap_deactivate)(struct file *file);
+ int (*swap_rw)(struct kiocb *iocb, struct iov_iter *iter);
};
extern const struct address_space_operations empty_aops;
diff --git a/mm/page_io.c b/mm/page_io.c
index 34b12d6f94d7..e90a3231f225 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -284,6 +284,25 @@ static void bio_associate_blkg_from_page(struct bio *bio, struct page *page)
#define bio_associate_blkg_from_page(bio, page) do { } while (0)
#endif /* CONFIG_MEMCG && CONFIG_BLK_CGROUP */
+struct swap_iocb {
+ struct kiocb iocb;
+ struct bio_vec bvec;
+};
+static mempool_t *sio_pool;
+
+int sio_pool_init(void)
+{
+ if (!sio_pool) {
+ mempool_t *pool = mempool_create_kmalloc_pool(
+ SWAP_CLUSTER_MAX, sizeof(struct swap_iocb));
+ if (cmpxchg(&sio_pool, NULL, pool))
+ mempool_destroy(pool);
+ }
+ if (!sio_pool)
+ return -ENOMEM;
+ return 0;
+}
+
int __swap_writepage(struct page *page, struct writeback_control *wbc,
bio_end_io_t end_write_func)
{
@@ -355,6 +374,48 @@ int __swap_writepage(struct page *page, struct writeback_control *wbc,
return 0;
}
+static void sio_read_complete(struct kiocb *iocb, long ret)
+{
+ struct swap_iocb *sio = container_of(iocb, struct swap_iocb, iocb);
+ struct page *page = sio->bvec.bv_page;
+
+ if (ret != 0 && ret != PAGE_SIZE) {
+ SetPageError(page);
+ ClearPageUptodate(page);
+ pr_alert_ratelimited("Read-error on swap-device\n");
+ } else {
+ SetPageUptodate(page);
+ count_vm_event(PSWPIN);
+ }
+ unlock_page(page);
+ mempool_free(sio, sio_pool);
+}
+
+static int swap_readpage_fs(struct page *page)
+{
+ struct swap_info_struct *sis = page_swap_info(page);
+ struct file *swap_file = sis->swap_file;
+ struct address_space *mapping = swap_file->f_mapping;
+ struct iov_iter from;
+ struct swap_iocb *sio;
+ loff_t pos = page_file_offset(page);
+ int ret;
+
+ sio = mempool_alloc(sio_pool, GFP_KERNEL);
+ init_sync_kiocb(&sio->iocb, swap_file);
+ sio->iocb.ki_pos = pos;
+ sio->iocb.ki_complete = sio_read_complete;
+ sio->bvec.bv_page = page;
+ sio->bvec.bv_len = PAGE_SIZE;
+ sio->bvec.bv_offset = 0;
+
+ iov_iter_bvec(&from, READ, &sio->bvec, 1, PAGE_SIZE);
+ ret = mapping->a_ops->swap_rw(&sio->iocb, &from);
+ if (ret != -EIOCBQUEUED)
+ sio_read_complete(&sio->iocb, ret);
+ return ret;
+}
+
int swap_readpage(struct page *page, bool synchronous)
{
struct bio *bio;
@@ -381,12 +442,7 @@ int swap_readpage(struct page *page, bool synchronous)
}
if (data_race(sis->flags & SWP_FS_OPS)) {
- struct file *swap_file = sis->swap_file;
- struct address_space *mapping = swap_file->f_mapping;
-
- ret = mapping->a_ops->readpage(swap_file, page);
- if (!ret)
- count_vm_event(PSWPIN);
+ ret = swap_readpage_fs(page);
goto out;
}
diff --git a/mm/swap.h b/mm/swap.h
index 5c676e55f288..e8ee995cf8d8 100644
--- a/mm/swap.h
+++ b/mm/swap.h
@@ -3,6 +3,7 @@
#include <linux/blk_types.h> /* for bio_end_io_t */
/* linux/mm/page_io.c */
+int sio_pool_init(void);
int swap_readpage(struct page *page, bool do_poll);
int swap_writepage(struct page *page, struct writeback_control *wbc);
void end_swap_bio_write(struct bio *bio);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index ed6028aea8bf..c800c17bf0c8 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2350,6 +2350,11 @@ static int setup_swap_extents(struct swap_info_struct *sis, sector_t *span)
if (ret < 0)
return ret;
sis->flags |= SWP_ACTIVATED;
+ if ((sis->flags & SWP_FS_OPS) &&
+ sio_pool_init() != 0) {
+ destroy_swap_extents(sis);
+ return -ENOMEM;
+ }
return ret;
}
next prev parent reply other threads:[~2022-02-07 4:47 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-07 4:46 [PATCH 00/21 V4] Repair SWAP-over_NFS NeilBrown
2022-02-07 4:46 ` [PATCH 04/21] MM: reclaim mustn't enter FS for SWP_FS_OPS swap-space NeilBrown
2022-02-07 4:46 ` [PATCH 21/21] NFS: swap-out must always use STABLE writes NeilBrown
2022-02-07 4:46 ` [PATCH 03/21] MM: move responsibility for setting SWP_FS_OPS to ->swap_activate NeilBrown
2022-02-07 4:46 ` [PATCH 08/21] MM: submit multipage reads for SWP_FS_OPS swap-space NeilBrown
2022-02-07 4:46 ` [PATCH 17/21] SUNRPC: improve 'swap' handling: scheduling and PF_MEMALLOC NeilBrown
2022-02-07 15:53 ` Chuck Lever III
2022-02-07 4:46 ` [PATCH 09/21] MM: submit multipage write for SWP_FS_OPS swap-space NeilBrown
2022-02-07 8:40 ` Christoph Hellwig
2022-02-07 4:46 ` [PATCH 13/21] SUNRPC/auth: async tasks mustn't block waiting for memory NeilBrown
2022-02-07 4:46 ` [PATCH 07/21] DOC: update documentation for swap_activate and swap_rw NeilBrown
2022-02-07 4:46 ` [PATCH 15/21] SUNRPC: remove scheduling boost for "SWAPPER" tasks NeilBrown
2022-02-07 4:46 ` [PATCH 19/21] NFS: rename nfs_direct_IO and use as ->swap_rw NeilBrown
2022-02-07 4:46 ` NeilBrown [this message]
2022-02-07 4:46 ` [PATCH 10/21] VFS: Add FMODE_CAN_ODIRECT file flag NeilBrown
2022-02-07 4:46 ` [PATCH 12/21] SUNRPC/call_alloc: async tasks mustn't block waiting for memory NeilBrown
2022-02-07 4:46 ` [PATCH 16/21] NFS: discard NFS_RPC_SWAPFLAGS and RPC_TASK_ROOTCREDS NeilBrown
2022-02-07 4:46 ` [PATCH 20/21] NFS: swap IO handling is slightly different for O_DIRECT IO NeilBrown
2022-02-07 4:46 ` [PATCH 06/21] MM: perform async writes to SWP_FS_OPS swap-space using ->swap_rw NeilBrown
2022-02-07 4:46 ` [PATCH 11/21] NFS: remove IS_SWAPFILE hack NeilBrown
2022-02-07 4:46 ` [PATCH 02/21] MM: drop swap_set_page_dirty NeilBrown
2022-02-07 4:46 ` [PATCH 01/21] MM: create new mm/swap.h header file NeilBrown
2022-02-10 3:24 ` [PATCH 01/21 - revised] " NeilBrown
2022-02-10 15:19 ` [PATCH 01/21] " Geert Uytterhoeven
2022-02-14 23:50 ` NeilBrown
2022-02-07 4:46 ` [PATCH 14/21] SUNRPC/xprt: async tasks mustn't block waiting for memory NeilBrown
2022-02-07 4:46 ` [PATCH 18/21] NFSv4: keep state manager thread active if swap is enabled NeilBrown
2022-02-10 15:22 ` [PATCH 00/21 V4] Repair SWAP-over_NFS Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=164420916114.29374.8467297159548469912.stgit@noble.brown \
--to=neilb@suse.de \
--cc=akpm@linux-foundation.org \
--cc=anna.schumaker@netapp.com \
--cc=chuck.lever@oracle.com \
--cc=dhowells@redhat.com \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nfs@vger.kernel.org \
--cc=markhemm@googlemail.com \
--cc=trond.myklebust@hammerspace.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox