linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Yafang Shao <laoar.shao@gmail.com>
To: jack@suse.cz
Cc: akpm@linux-foundation.org, hannes@cmpxchg.org, mhocko@suse.com,
	vdavydov.dev@gmail.com, jlayton@redhat.com, nborisov@suse.com,
	tytso@mit.edu, mawilcox@microsoft.com, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org, laoar.shao@gmail.com
Subject: [PATCH v2] mm: introduce validity check on vm dirtiness settings
Date: Tue, 19 Sep 2017 06:53:00 +0800	[thread overview]
Message-ID: <1505775180-12014-1-git-send-email-laoar.shao@gmail.com> (raw)

we can find the logic in domain_dirty_limits() that
when dirty bg_thresh is bigger than dirty thresh,
bg_thresh will be set as thresh * 1 / 2.
	if (bg_thresh >= thresh)
		bg_thresh = thresh / 2;

But actually we can set vm background dirtiness bigger than
vm dirtiness successfully. This behavior may mislead us.
We'd better do this validity check at the beginning.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
---
 Documentation/sysctl/vm.txt |  5 +++
 mm/page-writeback.c         | 86 ++++++++++++++++++++++++++++++++++++++++-----
 2 files changed, 83 insertions(+), 8 deletions(-)

diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 9baf66a..5de02f6 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -156,6 +156,8 @@ read.
 Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
 value lower than this limit will be ignored and the old configuration will be
 retained.
+dirty_bytes can't less than dirty_background_bytes or
+available_memory / 100 * dirty_ratio.
 
 ==============================================================
 
@@ -176,6 +178,9 @@ generating disk writes will itself start writing out dirty data.
 
 The total available memory is not equal to total system memory.
 
+Note: dirty_ratio can't less than dirty_background_ratio or
+dirty_background_bytes / available_memory * 100.
+
 ==============================================================
 
 dirty_writeback_centisecs
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 0b9c5cb..4a2d229 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -511,15 +511,68 @@ bool node_dirty_ok(struct pglist_data *pgdat)
 	return nr_pages <= limit;
 }
 
+static bool vm_dirty_settings_valid(void)
+{
+	bool ret = true;
+	unsigned long bytes;
+
+	if (vm_dirty_ratio > 0) {
+		if (dirty_background_ratio >= vm_dirty_ratio) {
+			ret = false;
+			goto out;
+		}
+
+		bytes = global_dirtyable_memory() * PAGE_SIZE / 100 *
+				vm_dirty_ratio;
+		if (dirty_background_bytes >= bytes) {
+			ret = false;
+			goto out;
+		}
+	}
+
+	if (vm_dirty_bytes > 0) {
+		if (dirty_background_bytes >= vm_dirty_bytes) {
+			ret = false;
+			goto out;
+		}
+
+		bytes = global_dirtyable_memory() * PAGE_SIZE / 100 *
+				dirty_background_ratio;
+
+		if (bytes >= vm_dirty_bytes) {
+			ret = false;
+			goto out;
+		}
+	}
+
+	if (vm_dirty_bytes == 0 && vm_dirty_ratio == 0 &&
+		(dirty_background_bytes != 0 || dirty_background_ratio != 0))
+		ret = false;
+
+out:
+	if (!ret)
+		pr_err("vm dirtiness can't less than vm background dirtiness\n");
+
+	return ret;
+}
+
 int dirty_background_ratio_handler(struct ctl_table *table, int write,
 		void __user *buffer, size_t *lenp,
 		loff_t *ppos)
 {
 	int ret;
+	int old_ratio = dirty_background_ratio;
 
 	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
-	if (ret == 0 && write)
-		dirty_background_bytes = 0;
+	if (ret == 0 && write) {
+		if (dirty_background_ratio != old_ratio &&
+			!vm_dirty_settings_valid()) {
+			dirty_background_ratio = old_ratio;
+			ret = -EINVAL;
+		} else
+			dirty_background_bytes = 0;
+	}
+
 	return ret;
 }
 
@@ -528,10 +581,17 @@ int dirty_background_bytes_handler(struct ctl_table *table, int write,
 		loff_t *ppos)
 {
 	int ret;
+	unsigned long old_bytes = dirty_background_bytes;
 
 	ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
-	if (ret == 0 && write)
-		dirty_background_ratio = 0;
+	if (ret == 0 && write) {
+		if (dirty_background_bytes != old_bytes &&
+			!vm_dirty_settings_valid()) {
+			dirty_background_bytes = old_bytes;
+			ret = -EINVAL;
+		} else
+			dirty_background_ratio = 0;
+	}
 	return ret;
 }
 
@@ -544,8 +604,13 @@ int dirty_ratio_handler(struct ctl_table *table, int write,
 
 	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 	if (ret == 0 && write && vm_dirty_ratio != old_ratio) {
-		writeback_set_ratelimit();
-		vm_dirty_bytes = 0;
+		if (vm_dirty_settings_valid()) {
+			writeback_set_ratelimit();
+			vm_dirty_bytes = 0;
+		} else {
+			vm_dirty_ratio = old_ratio;
+			ret = -EINVAL;
+		}
 	}
 	return ret;
 }
@@ -559,8 +624,13 @@ int dirty_bytes_handler(struct ctl_table *table, int write,
 
 	ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
 	if (ret == 0 && write && vm_dirty_bytes != old_bytes) {
-		writeback_set_ratelimit();
-		vm_dirty_ratio = 0;
+		if (vm_dirty_settings_valid()) {
+			writeback_set_ratelimit();
+			vm_dirty_ratio = 0;
+		} else {
+			vm_dirty_bytes = old_bytes;
+			ret = -EINVAL;
+		}
 	}
 	return ret;
 }
-- 
1.8.3.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

             reply	other threads:[~2017-09-18 15:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-18 22:53 Yafang Shao [this message]
2017-09-19  8:35 ` Jan Kara
2017-09-19 11:48   ` Yafang Shao
2017-09-20 15:33     ` Jan Kara
2017-09-21  1:42       ` Yafang Shao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1505775180-12014-1-git-send-email-laoar.shao@gmail.com \
    --to=laoar.shao@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=hannes@cmpxchg.org \
    --cc=jack@suse.cz \
    --cc=jlayton@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mawilcox@microsoft.com \
    --cc=mhocko@suse.com \
    --cc=nborisov@suse.com \
    --cc=tytso@mit.edu \
    --cc=vdavydov.dev@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox