linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: kernel-team@lge.com, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org,
	Johannes Weiner <hannes@cmpxchg.org>,
	Michal Hocko <mhocko@suse.com>, Minchan Kim <minchan@kernel.org>
Subject: [RFC 07/11] mm: remove SWAP_AGAIN in ttu
Date: Thu,  2 Mar 2017 15:39:21 +0900	[thread overview]
Message-ID: <1488436765-32350-8-git-send-email-minchan@kernel.org> (raw)
In-Reply-To: <1488436765-32350-1-git-send-email-minchan@kernel.org>

In 2002, [1] introduced SWAP_AGAIN.
At that time, ttuo used spin_trylock(&mm->page_table_lock) so it's
really easy to contend and fail to hold a lock so SWAP_AGAIN to keep
LRU status makes sense.

However, now we changed it to mutex-based lock and be able to block
without skip pte so there is a few of small window to return
SWAP_AGAIN so remove SWAP_AGAIN and just return SWAP_FAIL.

[1] c48c43e, minimal rmap
Signed-off-by: Minchan Kim <minchan@kernel.org>
---
 mm/rmap.c   | 11 +++--------
 mm/vmscan.c |  2 --
 2 files changed, 3 insertions(+), 10 deletions(-)

diff --git a/mm/rmap.c b/mm/rmap.c
index 47898a1..da18f21 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1492,13 +1492,10 @@ static int page_mapcount_is_zero(struct page *page)
  * Return values are:
  *
  * SWAP_SUCCESS	- we succeeded in removing all mappings
- * SWAP_AGAIN	- we missed a mapping, try again later
  * SWAP_FAIL	- the page is unswappable
  */
 int try_to_unmap(struct page *page, enum ttu_flags flags)
 {
-	int ret;
-
 	struct rmap_walk_control rwc = {
 		.rmap_one = try_to_unmap_one,
 		.arg = (void *)flags,
@@ -1518,13 +1515,11 @@ int try_to_unmap(struct page *page, enum ttu_flags flags)
 		rwc.invalid_vma = invalid_migration_vma;
 
 	if (flags & TTU_RMAP_LOCKED)
-		ret = rmap_walk_locked(page, &rwc);
+		rmap_walk_locked(page, &rwc);
 	else
-		ret = rmap_walk(page, &rwc);
+		rmap_walk(page, &rwc);
 
-	if (!page_mapcount(page))
-		ret = SWAP_SUCCESS;
-	return ret;
+	return !page_mapcount(page) ? SWAP_SUCCESS: SWAP_FAIL;
 }
 
 static int page_not_mapped(struct page *page)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 3cdd270b..170c61f 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1144,8 +1144,6 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 			case SWAP_FAIL:
 				nr_unmap_fail++;
 				goto activate_locked;
-			case SWAP_AGAIN:
-				goto keep_locked;
 			case SWAP_SUCCESS:
 				; /* try to free the page below */
 			}
-- 
2.7.4

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2017-03-02  6:39 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-02  6:39 [RFC 00/11] make try_to_unmap simple Minchan Kim
2017-03-02  6:39 ` [RFC 01/11] mm: use SWAP_SUCCESS instead of 0 Minchan Kim
2017-03-02 14:27   ` Anshuman Khandual
2017-03-03  3:01     ` Minchan Kim
2017-03-06  9:07       ` Anshuman Khandual
2017-03-07 14:19   ` Kirill A. Shutemov
2017-03-08  6:25     ` Minchan Kim
2017-03-02  6:39 ` [RFC 02/11] mm: remove unncessary ret in page_referenced Minchan Kim
2017-03-02 14:33   ` Anshuman Khandual
2017-03-03  3:03     ` Minchan Kim
2017-03-07 14:20   ` Kirill A. Shutemov
2017-03-02  6:39 ` [RFC 03/11] mm: remove SWAP_DIRTY in ttu Minchan Kim
2017-03-02  7:34   ` Hillf Danton
2017-03-03  2:57     ` Minchan Kim
2017-03-02 14:42   ` Anshuman Khandual
2017-03-07 14:20   ` Kirill A. Shutemov
2017-03-02  6:39 ` [RFC 04/11] mm: remove SWAP_MLOCK check for SWAP_SUCCESS " Minchan Kim
2017-03-02 14:51   ` Anshuman Khandual
2017-03-03  3:04     ` Minchan Kim
2017-03-07 14:26   ` Kirill A. Shutemov
2017-03-08  6:40     ` Minchan Kim
2017-03-02  6:39 ` [RFC 05/11] mm: make the try_to_munlock void function Minchan Kim
2017-03-03 11:43   ` Anshuman Khandual
2017-03-06  2:09     ` Minchan Kim
2017-03-06  9:40       ` Anshuman Khandual
2017-03-07  6:50         ` Minchan Kim
2017-03-07  8:55           ` Anshuman Khandual
2017-03-07 15:17   ` Kirill A. Shutemov
2017-03-08  6:41     ` Minchan Kim
2017-03-02  6:39 ` [RFC 06/11] mm: remove SWAP_MLOCK in ttu Minchan Kim
2017-03-03 12:36   ` Anshuman Khandual
2017-03-06  2:15     ` Minchan Kim
2017-03-07 15:24       ` Kirill A. Shutemov
2017-03-08  6:42         ` Minchan Kim
2017-03-02  6:39 ` Minchan Kim [this message]
2017-03-03 12:54   ` [RFC 07/11] mm: remove SWAP_AGAIN " Anshuman Khandual
2017-03-06  2:16     ` Minchan Kim
2017-03-02  6:39 ` [RFC 08/11] mm: make ttu's return boolean Minchan Kim
2017-03-08  7:13   ` John Hubbard
2017-03-09  6:37     ` Minchan Kim
2017-03-09  6:46       ` John Hubbard
2017-03-02  6:39 ` [RFC 09/11] mm: make rmap_walk void function Minchan Kim
2017-03-02  6:39 ` [RFC 10/11] mm: make rmap_one boolean function Minchan Kim
2017-03-02  6:39 ` [RFC 11/11] mm: remove SWAP_[SUCCESS|AGAIN|FAIL] Minchan Kim
2017-03-03 13:04   ` Anshuman Khandual
2017-03-06  2:18     ` Minchan Kim
2017-03-02 14:22 ` [RFC 00/11] make try_to_unmap simple Anshuman Khandual
2017-03-03  2:11   ` Minchan Kim
2017-03-03  5:39     ` Anshuman Khandual

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1488436765-32350-8-git-send-email-minchan@kernel.org \
    --to=minchan@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=hannes@cmpxchg.org \
    --cc=kernel-team@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox