From: Minchan Kim <minchan@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: kernel-team@lge.com, linux-mm@kvack.org,
linux-kernel@vger.kernel.org,
Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@suse.com>, Minchan Kim <minchan@kernel.org>,
Vlastimil Babka <vbabka@suse.cz>,
"Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Subject: [RFC 05/11] mm: make the try_to_munlock void function
Date: Thu, 2 Mar 2017 15:39:19 +0900 [thread overview]
Message-ID: <1488436765-32350-6-git-send-email-minchan@kernel.org> (raw)
In-Reply-To: <1488436765-32350-1-git-send-email-minchan@kernel.org>
try_to_munlock returns SWAP_MLOCK if the one of VMAs mapped
the page has VM_LOCKED flag. In that time, VM set PG_mlocked to
the page if the page is not pte-mapped THP which cannot be
mlocked, either.
With that, __munlock_isolated_page can use PageMlocked to check
whether try_to_munlock is successful or not without relying on
try_to_munlock's retval. It helps to make ttu/ttuo simple with
upcoming patches.
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
---
include/linux/rmap.h | 2 +-
mm/mlock.c | 6 ++----
mm/rmap.c | 16 ++++------------
3 files changed, 7 insertions(+), 17 deletions(-)
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index b556eef..1b0cd4c 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -235,7 +235,7 @@ int page_mkclean(struct page *);
* called in munlock()/munmap() path to check for other vmas holding
* the page mlocked.
*/
-int try_to_munlock(struct page *);
+void try_to_munlock(struct page *);
void remove_migration_ptes(struct page *old, struct page *new, bool locked);
diff --git a/mm/mlock.c b/mm/mlock.c
index cdbed8a..d34a540 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -122,17 +122,15 @@ static bool __munlock_isolate_lru_page(struct page *page, bool getpage)
*/
static void __munlock_isolated_page(struct page *page)
{
- int ret = SWAP_AGAIN;
-
/*
* Optimization: if the page was mapped just once, that's our mapping
* and we don't need to check all the other vmas.
*/
if (page_mapcount(page) > 1)
- ret = try_to_munlock(page);
+ try_to_munlock(page);
/* Did try_to_unlock() succeed or punt? */
- if (ret != SWAP_MLOCK)
+ if (!PageMlocked(page))
count_vm_event(UNEVICTABLE_PGMUNLOCKED);
putback_lru_page(page);
diff --git a/mm/rmap.c b/mm/rmap.c
index 0a48958..61ae694 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1540,18 +1540,10 @@ static int page_not_mapped(struct page *page)
* Called from munlock code. Checks all of the VMAs mapping the page
* to make sure nobody else has this page mlocked. The page will be
* returned with PG_mlocked cleared if no other vmas have it mlocked.
- *
- * Return values are:
- *
- * SWAP_AGAIN - no vma is holding page mlocked, or,
- * SWAP_AGAIN - page mapped in mlocked vma -- couldn't acquire mmap sem
- * SWAP_FAIL - page cannot be located at present
- * SWAP_MLOCK - page is now mlocked.
*/
-int try_to_munlock(struct page *page)
-{
- int ret;
+void try_to_munlock(struct page *page)
+{
struct rmap_walk_control rwc = {
.rmap_one = try_to_unmap_one,
.arg = (void *)TTU_MUNLOCK,
@@ -1561,9 +1553,9 @@ int try_to_munlock(struct page *page)
};
VM_BUG_ON_PAGE(!PageLocked(page) || PageLRU(page), page);
+ VM_BUG_ON_PAGE(PageMlocked(page), page);
- ret = rmap_walk(page, &rwc);
- return ret;
+ rmap_walk(page, &rwc);
}
void __put_anon_vma(struct anon_vma *anon_vma)
--
2.7.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-03-02 6:39 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-02 6:39 [RFC 00/11] make try_to_unmap simple Minchan Kim
2017-03-02 6:39 ` [RFC 01/11] mm: use SWAP_SUCCESS instead of 0 Minchan Kim
2017-03-02 14:27 ` Anshuman Khandual
2017-03-03 3:01 ` Minchan Kim
2017-03-06 9:07 ` Anshuman Khandual
2017-03-07 14:19 ` Kirill A. Shutemov
2017-03-08 6:25 ` Minchan Kim
2017-03-02 6:39 ` [RFC 02/11] mm: remove unncessary ret in page_referenced Minchan Kim
2017-03-02 14:33 ` Anshuman Khandual
2017-03-03 3:03 ` Minchan Kim
2017-03-07 14:20 ` Kirill A. Shutemov
2017-03-02 6:39 ` [RFC 03/11] mm: remove SWAP_DIRTY in ttu Minchan Kim
2017-03-02 7:34 ` Hillf Danton
2017-03-03 2:57 ` Minchan Kim
2017-03-02 14:42 ` Anshuman Khandual
2017-03-07 14:20 ` Kirill A. Shutemov
2017-03-02 6:39 ` [RFC 04/11] mm: remove SWAP_MLOCK check for SWAP_SUCCESS " Minchan Kim
2017-03-02 14:51 ` Anshuman Khandual
2017-03-03 3:04 ` Minchan Kim
2017-03-07 14:26 ` Kirill A. Shutemov
2017-03-08 6:40 ` Minchan Kim
2017-03-02 6:39 ` Minchan Kim [this message]
2017-03-03 11:43 ` [RFC 05/11] mm: make the try_to_munlock void function Anshuman Khandual
2017-03-06 2:09 ` Minchan Kim
2017-03-06 9:40 ` Anshuman Khandual
2017-03-07 6:50 ` Minchan Kim
2017-03-07 8:55 ` Anshuman Khandual
2017-03-07 15:17 ` Kirill A. Shutemov
2017-03-08 6:41 ` Minchan Kim
2017-03-02 6:39 ` [RFC 06/11] mm: remove SWAP_MLOCK in ttu Minchan Kim
2017-03-03 12:36 ` Anshuman Khandual
2017-03-06 2:15 ` Minchan Kim
2017-03-07 15:24 ` Kirill A. Shutemov
2017-03-08 6:42 ` Minchan Kim
2017-03-02 6:39 ` [RFC 07/11] mm: remove SWAP_AGAIN " Minchan Kim
2017-03-03 12:54 ` Anshuman Khandual
2017-03-06 2:16 ` Minchan Kim
2017-03-02 6:39 ` [RFC 08/11] mm: make ttu's return boolean Minchan Kim
2017-03-08 7:13 ` John Hubbard
2017-03-09 6:37 ` Minchan Kim
2017-03-09 6:46 ` John Hubbard
2017-03-02 6:39 ` [RFC 09/11] mm: make rmap_walk void function Minchan Kim
2017-03-02 6:39 ` [RFC 10/11] mm: make rmap_one boolean function Minchan Kim
2017-03-02 6:39 ` [RFC 11/11] mm: remove SWAP_[SUCCESS|AGAIN|FAIL] Minchan Kim
2017-03-03 13:04 ` Anshuman Khandual
2017-03-06 2:18 ` Minchan Kim
2017-03-02 14:22 ` [RFC 00/11] make try_to_unmap simple Anshuman Khandual
2017-03-03 2:11 ` Minchan Kim
2017-03-03 5:39 ` Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488436765-32350-6-git-send-email-minchan@kernel.org \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=hannes@cmpxchg.org \
--cc=kernel-team@lge.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox