linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: kernel-team@lge.com, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org,
	Johannes Weiner <hannes@cmpxchg.org>,
	Michal Hocko <mhocko@suse.com>, Minchan Kim <minchan@kernel.org>,
	Shaohua Li <shli@kernel.org>
Subject: [RFC 03/11] mm: remove SWAP_DIRTY in ttu
Date: Thu,  2 Mar 2017 15:39:17 +0900	[thread overview]
Message-ID: <1488436765-32350-4-git-send-email-minchan@kernel.org> (raw)
In-Reply-To: <1488436765-32350-1-git-send-email-minchan@kernel.org>

If we found lazyfree page is dirty, ttuo can just SetPageSwapBakced
in there like PG_mlocked page and just return with SWAP_FAIL which
is very natural because the page is not swappable right now so that
vmscan can activate it. There is no point to introduce new return
value SWAP_DIRTY in ttu at the moment.

Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
---
 include/linux/rmap.h | 1 -
 mm/rmap.c            | 4 ++--
 mm/vmscan.c          | 3 ---
 3 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index fee10d7..b556eef 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -298,6 +298,5 @@ static inline int page_mkclean(struct page *page)
 #define SWAP_AGAIN	1
 #define SWAP_FAIL	2
 #define SWAP_MLOCK	3
-#define SWAP_DIRTY	4
 
 #endif	/* _LINUX_RMAP_H */
diff --git a/mm/rmap.c b/mm/rmap.c
index 8076347..3a14013 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1424,7 +1424,8 @@ static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
 			} else if (!PageSwapBacked(page)) {
 				/* dirty MADV_FREE page */
 				set_pte_at(mm, address, pvmw.pte, pteval);
-				ret = SWAP_DIRTY;
+				SetPageSwapBacked(page);
+				ret = SWAP_FAIL;
 				page_vma_mapped_walk_done(&pvmw);
 				break;
 			}
@@ -1494,7 +1495,6 @@ static int page_mapcount_is_zero(struct page *page)
  * SWAP_AGAIN	- we missed a mapping, try again later
  * SWAP_FAIL	- the page is unswappable
  * SWAP_MLOCK	- page is mlocked.
- * SWAP_DIRTY	- page is dirty MADV_FREE page
  */
 int try_to_unmap(struct page *page, enum ttu_flags flags)
 {
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 7aa89e3..91cef05 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1141,9 +1141,6 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 		if (page_mapped(page)) {
 			switch (ret = try_to_unmap(page,
 				ttu_flags | TTU_BATCH_FLUSH)) {
-			case SWAP_DIRTY:
-				SetPageSwapBacked(page);
-				/* fall through */
 			case SWAP_FAIL:
 				nr_unmap_fail++;
 				goto activate_locked;
-- 
2.7.4

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2017-03-02  6:39 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-02  6:39 [RFC 00/11] make try_to_unmap simple Minchan Kim
2017-03-02  6:39 ` [RFC 01/11] mm: use SWAP_SUCCESS instead of 0 Minchan Kim
2017-03-02 14:27   ` Anshuman Khandual
2017-03-03  3:01     ` Minchan Kim
2017-03-06  9:07       ` Anshuman Khandual
2017-03-07 14:19   ` Kirill A. Shutemov
2017-03-08  6:25     ` Minchan Kim
2017-03-02  6:39 ` [RFC 02/11] mm: remove unncessary ret in page_referenced Minchan Kim
2017-03-02 14:33   ` Anshuman Khandual
2017-03-03  3:03     ` Minchan Kim
2017-03-07 14:20   ` Kirill A. Shutemov
2017-03-02  6:39 ` Minchan Kim [this message]
2017-03-02  7:34   ` [RFC 03/11] mm: remove SWAP_DIRTY in ttu Hillf Danton
2017-03-03  2:57     ` Minchan Kim
2017-03-02 14:42   ` Anshuman Khandual
2017-03-07 14:20   ` Kirill A. Shutemov
2017-03-02  6:39 ` [RFC 04/11] mm: remove SWAP_MLOCK check for SWAP_SUCCESS " Minchan Kim
2017-03-02 14:51   ` Anshuman Khandual
2017-03-03  3:04     ` Minchan Kim
2017-03-07 14:26   ` Kirill A. Shutemov
2017-03-08  6:40     ` Minchan Kim
2017-03-02  6:39 ` [RFC 05/11] mm: make the try_to_munlock void function Minchan Kim
2017-03-03 11:43   ` Anshuman Khandual
2017-03-06  2:09     ` Minchan Kim
2017-03-06  9:40       ` Anshuman Khandual
2017-03-07  6:50         ` Minchan Kim
2017-03-07  8:55           ` Anshuman Khandual
2017-03-07 15:17   ` Kirill A. Shutemov
2017-03-08  6:41     ` Minchan Kim
2017-03-02  6:39 ` [RFC 06/11] mm: remove SWAP_MLOCK in ttu Minchan Kim
2017-03-03 12:36   ` Anshuman Khandual
2017-03-06  2:15     ` Minchan Kim
2017-03-07 15:24       ` Kirill A. Shutemov
2017-03-08  6:42         ` Minchan Kim
2017-03-02  6:39 ` [RFC 07/11] mm: remove SWAP_AGAIN " Minchan Kim
2017-03-03 12:54   ` Anshuman Khandual
2017-03-06  2:16     ` Minchan Kim
2017-03-02  6:39 ` [RFC 08/11] mm: make ttu's return boolean Minchan Kim
2017-03-08  7:13   ` John Hubbard
2017-03-09  6:37     ` Minchan Kim
2017-03-09  6:46       ` John Hubbard
2017-03-02  6:39 ` [RFC 09/11] mm: make rmap_walk void function Minchan Kim
2017-03-02  6:39 ` [RFC 10/11] mm: make rmap_one boolean function Minchan Kim
2017-03-02  6:39 ` [RFC 11/11] mm: remove SWAP_[SUCCESS|AGAIN|FAIL] Minchan Kim
2017-03-03 13:04   ` Anshuman Khandual
2017-03-06  2:18     ` Minchan Kim
2017-03-02 14:22 ` [RFC 00/11] make try_to_unmap simple Anshuman Khandual
2017-03-03  2:11   ` Minchan Kim
2017-03-03  5:39     ` Anshuman Khandual

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1488436765-32350-4-git-send-email-minchan@kernel.org \
    --to=minchan@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=hannes@cmpxchg.org \
    --cc=kernel-team@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=shli@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox