From: "Jérôme Glisse" <jglisse@redhat.com>
To: akpm@linux-foundation.org, linux-kernel@vger.kernel.org,
linux-mm@kvack.org
Cc: "John Hubbard" <jhubbard@nvidia.com>,
"Jérôme Glisse" <jglisse@redhat.com>
Subject: [HMM v13 14/18] mm/hmm/migrate: support un-addressable ZONE_DEVICE page in migration
Date: Fri, 18 Nov 2016 13:18:23 -0500 [thread overview]
Message-ID: <1479493107-982-15-git-send-email-jglisse@redhat.com> (raw)
In-Reply-To: <1479493107-982-1-git-send-email-jglisse@redhat.com>
Allow to unmap and restore special swap entry of un-addressable
ZONE_DEVICE memory.
Signed-off-by: JA(C)rA'me Glisse <jglisse@redhat.com>
---
mm/migrate.c | 11 ++++++++++-
mm/rmap.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 1 deletion(-)
diff --git a/mm/migrate.c b/mm/migrate.c
index 66ce6b4..6b6b457 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -40,6 +40,7 @@
#include <linux/mmu_notifier.h>
#include <linux/page_idle.h>
#include <linux/page_owner.h>
+#include <linux/memremap.h>
#include <asm/tlbflush.h>
@@ -248,7 +249,15 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma,
pte = arch_make_huge_pte(pte, vma, new, 0);
}
#endif
- flush_dcache_page(new);
+
+ if (unlikely(is_zone_device_page(new)) && !is_addressable_page(new)) {
+ entry = make_device_entry(new, pte_write(pte));
+ pte = swp_entry_to_pte(entry);
+ if (pte_swp_soft_dirty(*ptep))
+ pte = pte_mksoft_dirty(pte);
+ } else
+ flush_dcache_page(new);
+
set_pte_at(mm, addr, ptep, pte);
if (PageHuge(new)) {
diff --git a/mm/rmap.c b/mm/rmap.c
index 1ef3640..fff3578 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -61,6 +61,7 @@
#include <linux/hugetlb.h>
#include <linux/backing-dev.h>
#include <linux/page_idle.h>
+#include <linux/memremap.h>
#include <asm/tlbflush.h>
@@ -1455,6 +1456,52 @@ static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
goto out;
}
+ if ((flags & TTU_MIGRATION) && is_zone_device_page(page)) {
+ swp_entry_t entry;
+ pte_t swp_pte;
+ pmd_t *pmdp;
+
+ if (!(page->pgmap->flags & MEMORY_MOVABLE))
+ goto out;
+
+ pmdp = mm_find_pmd(mm, address);
+ if (!pmdp)
+ goto out;
+
+ pte = pte_offset_map_lock(mm, pmdp, address, &ptl);
+ if (!pte)
+ goto out;
+
+ pteval = ptep_get_and_clear(mm, address, pte);
+ if (pte_present(pteval) || pte_none(pteval)) {
+ set_pte_at(mm, address, pte, pteval);
+ goto out_unmap;
+ }
+
+ entry = pte_to_swp_entry(pteval);
+ if (!is_device_entry(entry)) {
+ set_pte_at(mm, address, pte, pteval);
+ goto out_unmap;
+ }
+
+ if (device_entry_to_page(entry) != page) {
+ set_pte_at(mm, address, pte, pteval);
+ goto out_unmap;
+ }
+
+ /*
+ * Store the pfn of the page in a special migration
+ * pte. do_swap_page() will wait until the migration
+ * pte is removed and then restart fault handling.
+ */
+ entry = make_migration_entry(page, 0);
+ swp_pte = swp_entry_to_pte(entry);
+ if (pte_soft_dirty(*pte))
+ swp_pte = pte_swp_mksoft_dirty(swp_pte);
+ set_pte_at(mm, address, pte, swp_pte);
+ goto discard;
+ }
+
pte = page_check_address(page, mm, address, &ptl,
PageTransCompound(page));
if (!pte)
--
2.4.3
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2016-11-18 17:17 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 18:18 [HMM v13 00/18] HMM (Heterogeneous Memory Management) v13 Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 01/18] mm/memory/hotplug: convert device parameter bool to set of flags Jérôme Glisse
2016-11-21 0:44 ` Balbir Singh
2016-11-21 4:53 ` Jerome Glisse
2016-11-21 6:57 ` Anshuman Khandual
2016-11-21 12:19 ` Jerome Glisse
2016-11-21 6:41 ` Anshuman Khandual
2016-11-21 12:27 ` Jerome Glisse
2016-11-22 5:35 ` Anshuman Khandual
2016-11-22 14:08 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 02/18] mm/ZONE_DEVICE/unaddressable: add support for un-addressable device memory Jérôme Glisse
2016-11-21 8:06 ` Anshuman Khandual
2016-11-21 12:33 ` Jerome Glisse
2016-11-22 5:15 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 03/18] mm/ZONE_DEVICE/free_hot_cold_page: catch ZONE_DEVICE pages Jérôme Glisse
2016-11-21 8:18 ` Anshuman Khandual
2016-11-21 12:50 ` Jerome Glisse
2016-11-22 4:30 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 04/18] mm/ZONE_DEVICE/free-page: callback when page is freed Jérôme Glisse
2016-11-21 1:49 ` Balbir Singh
2016-11-21 4:57 ` Jerome Glisse
2016-11-21 8:26 ` Anshuman Khandual
2016-11-21 12:34 ` Jerome Glisse
2016-11-22 5:02 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 05/18] mm/ZONE_DEVICE/devmem_pages_remove: allow early removal of device memory Jérôme Glisse
2016-11-21 10:37 ` Anshuman Khandual
2016-11-21 12:39 ` Jerome Glisse
2016-11-22 4:54 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 06/18] mm/ZONE_DEVICE/unaddressable: add special swap for unaddressable Jérôme Glisse
2016-11-21 2:06 ` Balbir Singh
2016-11-21 5:05 ` Jerome Glisse
2016-11-22 2:19 ` Balbir Singh
2016-11-22 13:59 ` Jerome Glisse
2016-11-21 11:10 ` Anshuman Khandual
2016-11-21 10:58 ` Anshuman Khandual
2016-11-21 12:42 ` Jerome Glisse
2016-11-22 4:48 ` Anshuman Khandual
2016-11-24 13:56 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 07/18] mm/ZONE_DEVICE/x86: add support for un-addressable device memory Jérôme Glisse
2016-11-21 2:08 ` Balbir Singh
2016-11-21 5:08 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 08/18] mm/hmm: heterogeneous memory management (HMM for short) Jérôme Glisse
2016-11-21 2:29 ` Balbir Singh
2016-11-21 5:14 ` Jerome Glisse
2016-11-23 4:03 ` Anshuman Khandual
2016-11-27 13:10 ` Jerome Glisse
2016-11-28 2:58 ` Anshuman Khandual
2016-11-28 9:41 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 09/18] mm/hmm/mirror: mirror process address space on device with HMM helpers Jérôme Glisse
2016-11-21 2:42 ` Balbir Singh
2016-11-21 5:18 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 10/18] mm/hmm/mirror: add range lock helper, prevent CPU page table update for the range Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 11/18] mm/hmm/mirror: add range monitor helper, to monitor CPU page table update Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 12/18] mm/hmm/mirror: helper to snapshot CPU page table Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 13/18] mm/hmm/mirror: device page fault handler Jérôme Glisse
2016-11-18 18:18 ` Jérôme Glisse [this message]
2016-11-18 18:18 ` [HMM v13 15/18] mm/hmm/migrate: add new boolean copy flag to migratepage() callback Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 16/18] mm/hmm/migrate: new memory migration helper for use with device memory Jérôme Glisse
2016-11-18 19:57 ` Aneesh Kumar K.V
2016-11-18 20:15 ` Jerome Glisse
2016-11-19 14:32 ` Aneesh Kumar K.V
2016-11-19 17:17 ` Jerome Glisse
2016-11-20 18:21 ` Aneesh Kumar K.V
2016-11-20 20:06 ` Jerome Glisse
2016-11-21 3:30 ` Balbir Singh
2016-11-21 5:31 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 17/18] mm/hmm/devmem: device driver helper to hotplug ZONE_DEVICE memory Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 18/18] mm/hmm/devmem: dummy HMM device as an helper for " Jérôme Glisse
2016-11-19 0:41 ` [HMM v13 00/18] HMM (Heterogeneous Memory Management) v13 John Hubbard
2016-11-19 14:50 ` Aneesh Kumar K.V
2016-11-23 9:16 ` Haggai Eran
2016-11-25 16:16 ` Jerome Glisse
2016-11-27 13:27 ` Haggai Eran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479493107-982-15-git-send-email-jglisse@redhat.com \
--to=jglisse@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=jhubbard@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox