From: Jan Kara <jack@suse.cz>
To: linux-mm@kvack.org
Cc: linux-fsdevel@vger.kernel.org, linux-nvdimm@lists.01.org,
Dan Williams <dan.j.williams@intel.com>,
Ross Zwisler <ross.zwisler@linux.intel.com>,
Jan Kara <jack@suse.cz>
Subject: [PATCH 11/15] mm: Move part of wp_page_reuse() into the single call site
Date: Fri, 22 Jul 2016 14:19:37 +0200 [thread overview]
Message-ID: <1469189981-19000-12-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1469189981-19000-1-git-send-email-jack@suse.cz>
wp_page_reuse() handles write shared faults which is needed only in
wp_page_shared(). Move the handling only into that location to make
wp_page_reuse() simpler.
Signed-off-by: Jan Kara <jack@suse.cz>
---
mm/memory.c | 38 ++++++++++++++++----------------------
1 file changed, 16 insertions(+), 22 deletions(-)
diff --git a/mm/memory.c b/mm/memory.c
index 56b5fe8421a9..c3f639c33232 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2101,11 +2101,10 @@ static void fault_dirty_shared_page(struct vm_area_struct *vma,
* case, all we need to do here is to mark the page as writable and update
* any related book-keeping.
*/
-static inline int wp_page_reuse(struct mm_struct *mm,
+static inline void wp_page_reuse(struct mm_struct *mm,
struct vm_area_struct *vma, unsigned long address,
pte_t *page_table, spinlock_t *ptl, pte_t orig_pte,
- struct page *page, int page_mkwrite,
- int dirty_shared)
+ struct page *page)
__releases(ptl)
{
pte_t entry;
@@ -2123,16 +2122,6 @@ static inline int wp_page_reuse(struct mm_struct *mm,
if (ptep_set_access_flags(vma, address, page_table, entry, 1))
update_mmu_cache(vma, address, page_table);
pte_unmap_unlock(page_table, ptl);
-
- if (dirty_shared) {
- if (!page_mkwrite)
- lock_page(page);
-
- fault_dirty_shared_page(vma, page);
- put_page(page);
- }
-
- return VM_FAULT_WRITE;
}
/*
@@ -2308,8 +2297,8 @@ static int wp_pfn_shared(struct mm_struct *mm,
return 0;
}
}
- return wp_page_reuse(mm, vma, address, page_table, ptl, orig_pte,
- NULL, 0, 0);
+ wp_page_reuse(mm, vma, address, page_table, ptl, orig_pte, NULL);
+ return VM_FAULT_WRITE;
}
static int wp_page_shared(struct mm_struct *mm, struct vm_area_struct *vma,
@@ -2318,8 +2307,6 @@ static int wp_page_shared(struct mm_struct *mm, struct vm_area_struct *vma,
struct page *old_page)
__releases(ptl)
{
- int page_mkwrite = 0;
-
get_page(old_page);
if (vma->vm_ops->page_mkwrite) {
@@ -2346,11 +2333,17 @@ static int wp_page_shared(struct mm_struct *mm, struct vm_area_struct *vma,
put_page(old_page);
return 0;
}
- page_mkwrite = 1;
+ wp_page_reuse(mm, vma, address, page_table, ptl, orig_pte,
+ old_page);
+ } else {
+ wp_page_reuse(mm, vma, address, page_table, ptl, orig_pte,
+ old_page);
+ lock_page(old_page);
}
- return wp_page_reuse(mm, vma, address, page_table, ptl,
- orig_pte, old_page, page_mkwrite, 1);
+ fault_dirty_shared_page(vma, old_page);
+ put_page(old_page);
+ return VM_FAULT_WRITE;
}
/*
@@ -2429,8 +2422,9 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
page_move_anon_rmap(old_page, vma);
}
unlock_page(old_page);
- return wp_page_reuse(mm, vma, address, page_table, ptl,
- orig_pte, old_page, 0, 0);
+ wp_page_reuse(mm, vma, address, page_table, ptl,
+ orig_pte, old_page);
+ return VM_FAULT_WRITE;
}
unlock_page(old_page);
} else if (unlikely((vma->vm_flags & (VM_WRITE|VM_SHARED)) ==
--
2.6.6
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2016-07-22 12:20 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-22 12:19 [PATCH 0/15 v2] dax: Clear dirty bits after flushing caches Jan Kara
2016-07-22 12:19 ` [PATCH 01/15] mm: Create vm_fault structure earlier Jan Kara
2016-07-22 12:19 ` [PATCH 02/15] mm: Propagate original vm_fault into do_fault_around() Jan Kara
2016-07-22 12:19 ` [PATCH 03/15] mm: Add pmd and orig_pte fields to vm_fault Jan Kara
2016-07-22 12:19 ` [PATCH 04/15] mm: Allow full handling of COW faults in ->fault handlers Jan Kara
2016-07-22 12:19 ` [PATCH 05/15] mm: Factor out functionality to finish page faults Jan Kara
2016-07-22 12:19 ` [PATCH 06/15] mm: Move handling of COW faults into DAX code Jan Kara
2016-07-22 12:19 ` [PATCH 07/15] dax: Make cache flushing protected by entry lock Jan Kara
2016-07-22 12:19 ` [PATCH 08/15] mm: Export follow_pte() Jan Kara
2016-07-22 12:19 ` [PATCH 09/15] mm: Remove unnecessary vma->vm_ops check Jan Kara
2016-07-22 12:19 ` [PATCH 10/15] mm: Factor out common parts of write fault handling Jan Kara
2016-07-22 12:19 ` Jan Kara [this message]
2016-07-22 12:19 ` [PATCH 12/15] mm: Lift vm_fault structure creation from do_page_mkwrite() Jan Kara
2016-07-22 12:19 ` [PATCH 13/15] mm: Provide helper for finishing mkwrite faults Jan Kara
2016-08-09 14:50 ` [lkp] [mm] 0c649028cd: vm-scalability.throughput 343.9% improvement kernel test robot
2016-07-22 12:19 ` [PATCH 14/15] dax: Protect PTE modification on WP fault by radix tree entry lock Jan Kara
2016-07-25 21:30 ` Ross Zwisler
2016-07-26 14:09 ` Jan Kara
2016-07-22 12:19 ` [PATCH 15/15] dax: Clear dirty entry tags on cache flush Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469189981-19000-12-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=dan.j.williams@intel.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nvdimm@lists.01.org \
--cc=ross.zwisler@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox