linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Petr Mladek <pmladek@suse.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	Oleg Nesterov <oleg@redhat.com>, Tejun Heo <tj@kernel.org>,
	Ingo Molnar <mingo@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>,
	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>,
	Josh Triplett <josh@joshtriplett.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Jiri Kosina <jkosina@suse.cz>, Borislav Petkov <bp@suse.de>,
	Michal Hocko <mhocko@suse.cz>,
	linux-mm@kvack.org, Vlastimil Babka <vbabka@suse.cz>,
	live-patching@vger.kernel.org, linux-api@vger.kernel.org,
	linux-kernel@vger.kernel.org, Petr Mladek <pmladek@suse.com>
Subject: [RFC PATCH 10/14] ring_buffer: Fix more races when terminating the producer in the benchmark
Date: Tue, 28 Jul 2015 16:39:27 +0200	[thread overview]
Message-ID: <1438094371-8326-11-git-send-email-pmladek@suse.com> (raw)
In-Reply-To: <1438094371-8326-1-git-send-email-pmladek@suse.com>

The commit b44754d8262d3aab8 ("ring_buffer: Allow to exit the ring
buffer benchmark immediately") added a hack into ring_buffer_producer()
that set @kill_test when kthread_should_stop() returned true. It improved
the situation a lot. It stopped the kthread in most cases because
the producer spent most of the time in the patched while cycle.

But there are still few possible races when kthread_should_stop()
is set outside of the cycle. Then we do not set @kill_test and
some other checks pass.

This patch adds a better fix. It renames @test_kill/TEST_KILL() into
a better descriptive @test_error/TEST_ERROR(). Also it introduces
break_test() function that checks for both @test_error and
kthread_should_stop(). Finally, the new function is used
on many locations when the check for @test_error is not enough.

Also it adds a missing check into ring_buffer_producer_thread()
between setting TASK_INTERRUPTIBLE and calling schedule_timeout().
Otherwise, we might miss a wakeup from kthread_stop().

Finally, it adds the same check also into ring_buffer_consumer()
between setting TASK_INTERRUPTIBLE and calling schedule_timeout().
Well, I added this one just for paranoid reasons. If we are here
the producer should have been destroyed before and it should have
set @reader_finish. But better be safe.

Signed-off-by: Petr Mladek <pmladek@suse.com>
---
 kernel/trace/ring_buffer_benchmark.c | 65 ++++++++++++++++++++----------------
 1 file changed, 37 insertions(+), 28 deletions(-)

diff --git a/kernel/trace/ring_buffer_benchmark.c b/kernel/trace/ring_buffer_benchmark.c
index ccb1a0b95f64..10e0ec9b797f 100644
--- a/kernel/trace/ring_buffer_benchmark.c
+++ b/kernel/trace/ring_buffer_benchmark.c
@@ -60,12 +60,12 @@ MODULE_PARM_DESC(consumer_fifo, "fifo prio for consumer");
 
 static int read_events;
 
-static int kill_test;
+static int test_error;
 
-#define KILL_TEST()				\
+#define TEST_ERROR()				\
 	do {					\
-		if (!kill_test) {		\
-			kill_test = 1;		\
+		if (!test_error) {		\
+			test_error = 1;		\
 			WARN_ON(1);		\
 		}				\
 	} while (0)
@@ -75,6 +75,11 @@ enum event_status {
 	EVENT_DROPPED,
 };
 
+static bool break_test(void)
+{
+	return test_error || kthread_should_stop();
+}
+
 static enum event_status read_event(int cpu)
 {
 	struct ring_buffer_event *event;
@@ -87,7 +92,7 @@ static enum event_status read_event(int cpu)
 
 	entry = ring_buffer_event_data(event);
 	if (*entry != cpu) {
-		KILL_TEST();
+		TEST_ERROR();
 		return EVENT_DROPPED;
 	}
 
@@ -115,10 +120,13 @@ static enum event_status read_page(int cpu)
 		rpage = bpage;
 		/* The commit may have missed event flags set, clear them */
 		commit = local_read(&rpage->commit) & 0xfffff;
-		for (i = 0; i < commit && !kill_test; i += inc) {
+		for (i = 0; i < commit ; i += inc) {
+
+			if (break_test())
+				break;
 
 			if (i >= (PAGE_SIZE - offsetof(struct rb_page, data))) {
-				KILL_TEST();
+				TEST_ERROR();
 				break;
 			}
 
@@ -128,7 +136,7 @@ static enum event_status read_page(int cpu)
 			case RINGBUF_TYPE_PADDING:
 				/* failed writes may be discarded events */
 				if (!event->time_delta)
-					KILL_TEST();
+					TEST_ERROR();
 				inc = event->array[0] + 4;
 				break;
 			case RINGBUF_TYPE_TIME_EXTEND:
@@ -137,12 +145,12 @@ static enum event_status read_page(int cpu)
 			case 0:
 				entry = ring_buffer_event_data(event);
 				if (*entry != cpu) {
-					KILL_TEST();
+					TEST_ERROR();
 					break;
 				}
 				read++;
 				if (!event->array[0]) {
-					KILL_TEST();
+					TEST_ERROR();
 					break;
 				}
 				inc = event->array[0] + 4;
@@ -150,17 +158,17 @@ static enum event_status read_page(int cpu)
 			default:
 				entry = ring_buffer_event_data(event);
 				if (*entry != cpu) {
-					KILL_TEST();
+					TEST_ERROR();
 					break;
 				}
 				read++;
 				inc = ((event->type_len + 1) * 4);
 			}
-			if (kill_test)
+			if (test_error)
 				break;
 
 			if (inc <= 0) {
-				KILL_TEST();
+				TEST_ERROR();
 				break;
 			}
 		}
@@ -178,7 +186,7 @@ static void ring_buffer_consumer(void)
 	read_events ^= 1;
 
 	read = 0;
-	while (!reader_finish && !kill_test) {
+	while (!reader_finish && !break_test()) {
 		int found;
 
 		do {
@@ -193,17 +201,18 @@ static void ring_buffer_consumer(void)
 				else
 					stat = read_page(cpu);
 
-				if (kill_test)
+				if (break_test())
 					break;
 				if (stat == EVENT_FOUND)
 					found = 1;
 			}
-		} while (found && !kill_test);
+		} while (found && !break_test());
 
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (reader_finish)
+		if (reader_finish || break_test()) {
+			__set_current_state(TASK_RUNNING);
 			break;
-
+		}
 		schedule();
 	}
 	reader_finish = 0;
@@ -263,10 +272,7 @@ static void ring_buffer_producer(void)
 		if (cnt % wakeup_interval)
 			cond_resched();
 #endif
-		if (kthread_should_stop())
-			kill_test = 1;
-
-	} while (ktime_before(end_time, timeout) && !kill_test);
+	} while (ktime_before(end_time, timeout) && !break_test());
 	trace_printk("End ring buffer hammer\n");
 
 	if (consumer) {
@@ -282,7 +288,7 @@ static void ring_buffer_producer(void)
 	entries = ring_buffer_entries(buffer);
 	overruns = ring_buffer_overruns(buffer);
 
-	if (kill_test && !kthread_should_stop())
+	if (test_error)
 		trace_printk("ERROR!\n");
 
 	if (!disable_reader) {
@@ -363,15 +369,14 @@ static void wait_to_die(void)
 
 static int ring_buffer_consumer_thread(void *arg)
 {
-	while (!kthread_should_stop() && !kill_test) {
+	while (!break_test()) {
 		complete(&read_start);
 
 		ring_buffer_consumer();
 
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (kthread_should_stop() || kill_test)
+		if (break_test())
 			break;
-
 		schedule();
 	}
 	__set_current_state(TASK_RUNNING);
@@ -384,7 +389,7 @@ static int ring_buffer_consumer_thread(void *arg)
 
 static int ring_buffer_producer_thread(void *arg)
 {
-	while (!kthread_should_stop() && !kill_test) {
+	while (!break_test()) {
 		ring_buffer_reset(buffer);
 
 		if (consumer) {
@@ -393,11 +398,15 @@ static int ring_buffer_producer_thread(void *arg)
 		}
 
 		ring_buffer_producer();
-		if (kill_test)
+		if (break_test())
 			goto out_kill;
 
 		trace_printk("Sleeping for 10 secs\n");
 		set_current_state(TASK_INTERRUPTIBLE);
+		if (break_test()) {
+			__set_current_state(TASK_RUNNING);
+			goto out_kill;
+		}
 		schedule_timeout(HZ * SLEEP_TIME);
 	}
 
-- 
1.8.5.6

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2015-07-28 14:40 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-28 14:39 [RFC PATCH 00/14] kthread: Use kthread worker API more widely Petr Mladek
2015-07-28 14:39 ` [RFC PATCH 01/14] kthread: Allow to call __kthread_create_on_node() with va_list args Petr Mladek
2015-07-28 14:39 ` [RFC PATCH 02/14] kthread: Add create_kthread_worker*() Petr Mladek
2015-07-28 14:39 ` [RFC PATCH 03/14] kthread: Add drain_kthread_worker() Petr Mladek
2015-07-28 17:18   ` Tejun Heo
2015-07-29 10:04     ` Petr Mladek
2015-07-29 15:03       ` Tejun Heo
2015-07-28 14:39 ` [RFC PATCH 04/14] kthread: Add destroy_kthread_worker() Petr Mladek
2015-07-28 14:39 ` [RFC PATCH 05/14] kthread: Add wakeup_and_destroy_kthread_worker() Petr Mladek
2015-07-28 17:23   ` Tejun Heo
2015-07-28 14:39 ` [RFC PATCH 06/14] kthread: Add kthread_worker_created() Petr Mladek
2015-07-28 17:26   ` Tejun Heo
2015-07-29 10:07     ` Petr Mladek
2015-07-28 14:39 ` [RFC PATCH 07/14] mm/huge_page: Convert khugepaged() into kthread worker API Petr Mladek
2015-07-28 17:36   ` Tejun Heo
2015-07-29 11:32     ` Petr Mladek
2015-07-28 14:39 ` [RFC PATCH 08/14] rcu: Convert RCU gp kthreads " Petr Mladek
2015-07-28 17:37   ` Tejun Heo
2015-07-28 14:39 ` [RFC PATCH 09/14] ring_buffer: Initialize completions statically in the benchmark Petr Mladek
2015-08-03 18:31   ` Steven Rostedt
2015-09-04  9:31     ` Petr Mladek
2015-09-04 13:15       ` Steven Rostedt
2015-07-28 14:39 ` Petr Mladek [this message]
2015-08-03 18:33   ` [RFC PATCH 10/14] ring_buffer: Fix more races when terminating the producer " Steven Rostedt
2015-09-04  9:38     ` Petr Mladek
2015-09-07 17:49       ` Oleg Nesterov
2015-07-28 14:39 ` [RFC PATCH 11/14] ring_buffer: Use kthread worker API for the producer kthread " Petr Mladek
2015-07-28 14:39 ` [RFC PATCH 12/14] kthread_worker: Better support freezable kthread workers Petr Mladek
2015-07-28 14:39 ` [RFC PATCH 13/14] kthread_worker: Add set_kthread_worker_user_nice() Petr Mladek
2015-07-28 17:40   ` Tejun Heo
2015-07-29 11:23     ` Petr Mladek
2015-07-29 15:12       ` Tejun Heo
2015-07-28 14:39 ` [RFC PATCH 14/14] kthread_worker: Add set_kthread_worker_scheduler*() Petr Mladek
2015-07-28 17:41   ` Tejun Heo
2015-07-28 19:48     ` Peter Zijlstra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1438094371-8326-11-git-send-email-pmladek@suse.com \
    --to=pmladek@suse.com \
    --cc=akpm@linux-foundation.org \
    --cc=bp@suse.de \
    --cc=jkosina@suse.cz \
    --cc=josh@joshtriplett.org \
    --cc=linux-api@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=live-patching@vger.kernel.org \
    --cc=mhocko@suse.cz \
    --cc=mingo@redhat.com \
    --cc=oleg@redhat.com \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=peterz@infradead.org \
    --cc=rostedt@goodmis.org \
    --cc=tglx@linutronix.de \
    --cc=tj@kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox