From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Andrea Arcangeli <aarcange@redhat.com>,
Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>, Mel Gorman <mgorman@suse.de>,
Rik van Riel <riel@redhat.com>, Vlastimil Babka <vbabka@suse.cz>,
Christoph Lameter <cl@gentwo.org>,
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
Steve Capper <steve.capper@linaro.org>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@suse.cz>,
Jerome Marchand <jmarchan@redhat.com>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Subject: [PATCHv3 08/24] mm: adjust FOLL_SPLIT for new refcounting
Date: Thu, 12 Feb 2015 18:18:22 +0200 [thread overview]
Message-ID: <1423757918-197669-9-git-send-email-kirill.shutemov@linux.intel.com> (raw)
In-Reply-To: <1423757918-197669-1-git-send-email-kirill.shutemov@linux.intel.com>
We prepare kernel to allow transhuge pages to be mapped with ptes too.
We need to handle FOLL_SPLIT in follow_page_pte().
Also we use split_huge_page() directly instead of split_huge_page_pmd().
split_huge_page_pmd() will gone.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
mm/gup.c | 65 ++++++++++++++++++++++++++++++++++++++++++++--------------------
1 file changed, 45 insertions(+), 20 deletions(-)
diff --git a/mm/gup.c b/mm/gup.c
index a6e24e246f86..022d7a91de03 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -79,6 +79,20 @@ retry:
page = pte_page(pte);
}
+ if (flags & FOLL_SPLIT && PageTransCompound(page)) {
+ int ret;
+ page = compound_head(page);
+ get_page(page);
+ pte_unmap_unlock(ptep, ptl);
+ lock_page(page);
+ ret = split_huge_page(page);
+ unlock_page(page);
+ put_page(page);
+ if (ret)
+ return ERR_PTR(ret);
+ goto retry;
+ }
+
if (flags & FOLL_GET)
get_page_foll(page);
if (flags & FOLL_TOUCH) {
@@ -186,27 +200,38 @@ struct page *follow_page_mask(struct vm_area_struct *vma,
}
if ((flags & FOLL_NUMA) && pmd_protnone(*pmd))
return no_page_table(vma, flags);
- if (pmd_trans_huge(*pmd)) {
- if (flags & FOLL_SPLIT) {
- split_huge_page_pmd(vma, address, pmd);
- return follow_page_pte(vma, address, pmd, flags);
- }
- ptl = pmd_lock(mm, pmd);
- if (likely(pmd_trans_huge(*pmd))) {
- if (unlikely(pmd_trans_splitting(*pmd))) {
- spin_unlock(ptl);
- wait_split_huge_page(vma->anon_vma, pmd);
- } else {
- page = follow_trans_huge_pmd(vma, address,
- pmd, flags);
- spin_unlock(ptl);
- *page_mask = HPAGE_PMD_NR - 1;
- return page;
- }
- } else
- spin_unlock(ptl);
+ if (likely(!pmd_trans_huge(*pmd)))
+ return follow_page_pte(vma, address, pmd, flags);
+
+ ptl = pmd_lock(mm, pmd);
+ if (unlikely(!pmd_trans_huge(*pmd))) {
+ spin_unlock(ptl);
+ return follow_page_pte(vma, address, pmd, flags);
}
- return follow_page_pte(vma, address, pmd, flags);
+
+ if (unlikely(pmd_trans_splitting(*pmd))) {
+ spin_unlock(ptl);
+ wait_split_huge_page(vma->anon_vma, pmd);
+ return follow_page_pte(vma, address, pmd, flags);
+ }
+
+ if (flags & FOLL_SPLIT) {
+ int ret;
+ page = pmd_page(*pmd);
+ get_page(page);
+ spin_unlock(ptl);
+ lock_page(page);
+ ret = split_huge_page(page);
+ unlock_page(page);
+ put_page(page);
+ return ret ? ERR_PTR(ret) :
+ follow_page_pte(vma, address, pmd, flags);
+ }
+
+ page = follow_trans_huge_pmd(vma, address, pmd, flags);
+ spin_unlock(ptl);
+ *page_mask = HPAGE_PMD_NR - 1;
+ return page;
}
static int get_gate_page(struct mm_struct *mm, unsigned long address,
--
2.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-02-12 16:20 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-12 16:18 [PATCHv3 00/24] THP refcounting redesign Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 01/24] thp: cluster split_huge_page* code together Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 02/24] mm: change PageAnon() and page_anon_vma() to work on tail pages Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 03/24] mm: avoid PG_locked " Kirill A. Shutemov
2015-02-12 19:55 ` Rik van Riel
2015-02-12 20:10 ` Rik van Riel
2015-03-03 13:21 ` Aneesh Kumar K.V
2015-03-03 13:35 ` Kirill A. Shutemov
2015-03-03 15:21 ` Aneesh Kumar K.V
2015-02-12 16:18 ` [PATCHv3 04/24] rmap: add argument to charge compound page Kirill A. Shutemov
2015-02-12 21:10 ` Rik van Riel
2015-02-16 15:20 ` Kirill A. Shutemov
2015-02-20 17:39 ` Jerome Marchand
2015-02-23 16:21 ` Vlastimil Babka
2015-03-04 11:52 ` Kirill A. Shutemov
2015-03-04 12:09 ` Vlastimil Babka
2015-03-04 13:26 ` Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 05/24] mm, proc: adjust PSS calculation Kirill A. Shutemov
2015-02-20 17:31 ` Jerome Marchand
2015-02-23 13:52 ` Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 06/24] mm: store mapcount for compound page separately Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 07/24] mm, thp: adjust conditions when we can reuse the page on WP fault Kirill A. Shutemov
2015-02-12 16:18 ` Kirill A. Shutemov [this message]
2015-02-12 16:18 ` [PATCHv3 09/24] thp, mlock: do not allow huge pages in mlocked area Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 10/24] khugepaged: ignore pmd tables with THP mapped with ptes Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 11/24] thp: rename split_huge_page_pmd() to split_huge_pmd() Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 12/24] thp: PMD splitting without splitting compound page Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 13/24] mm, vmstats: new THP splitting event Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 14/24] thp: implement new split_huge_page() Kirill A. Shutemov
2015-02-12 17:07 ` Sasha Levin
2015-02-12 19:24 ` Sasha Levin
2015-02-16 15:57 ` Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 15/24] mm, thp: remove infrastructure for handling splitting PMDs Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 16/24] x86, " Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 17/24] futex, thp: remove special case for THP in get_futex_key Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 18/24] thp, mm: split_huge_page(): caller need to lock page Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 19/24] thp, mm: use migration entries to freeze page counts on split Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 20/24] mm, thp: remove compound_lock Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 21/24] thp: introduce deferred_split_huge_page() Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 22/24] memcg: adjust to support new THP refcounting Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 23/24] ksm: split huge pages on follow_page() Kirill A. Shutemov
2015-02-12 16:18 ` [PATCHv3 24/24] thp: update documentation Kirill A. Shutemov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423757918-197669-9-git-send-email-kirill.shutemov@linux.intel.com \
--to=kirill.shutemov@linux.intel.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=cl@gentwo.org \
--cc=dave.hansen@intel.com \
--cc=hannes@cmpxchg.org \
--cc=hughd@google.com \
--cc=jmarchan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@suse.cz \
--cc=n-horiguchi@ah.jp.nec.com \
--cc=riel@redhat.com \
--cc=steve.capper@linaro.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox