From: Joonsoo Kim <iamjoonsoo.kim@lge.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Mel Gorman <mgorman@suse.de>,
Laura Abbott <lauraa@codeaurora.org>,
Minchan Kim <minchan@kernel.org>,
Heesub Shin <heesub.shin@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Michal Nazarewicz <mina86@mina86.com>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Hui Zhu <zhuhui@xiaomi.com>, Gioh Kim <gioh.kim@lge.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Ritesh Harjani <ritesh.list@gmail.com>,
Vlastimil Babka <vbabka@suse.cz>,
Joonsoo Kim <iamjoonsoo.kim@lge.com>
Subject: [RFC 15/16] mm/cma: remove ALLOC_CMA
Date: Thu, 12 Feb 2015 16:32:19 +0900 [thread overview]
Message-ID: <1423726340-4084-16-git-send-email-iamjoonsoo.kim@lge.com> (raw)
In-Reply-To: <1423726340-4084-1-git-send-email-iamjoonsoo.kim@lge.com>
Now, reserved pages for CMA are on ZONE_CMA and it only serves for
MIGRATE_MOVABLE. Therefore, we don't need to consider ALLOC_CMA at all.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
---
mm/compaction.c | 4 ----
mm/internal.h | 3 +--
mm/page_alloc.c | 16 ++--------------
3 files changed, 3 insertions(+), 20 deletions(-)
diff --git a/mm/compaction.c b/mm/compaction.c
index f9792ba..b79134e 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -1312,10 +1312,6 @@ unsigned long try_to_compact_pages(struct zonelist *zonelist,
if (!order || !may_enter_fs || !may_perform_io)
return COMPACT_SKIPPED;
-#ifdef CONFIG_CMA
- if (gfpflags_to_migratetype(gfp_mask) == MIGRATE_MOVABLE)
- alloc_flags |= ALLOC_CMA;
-#endif
/* Compact each zone in the list */
for_each_zone_zonelist_nodemask(zone, z, zonelist, high_zoneidx,
nodemask) {
diff --git a/mm/internal.h b/mm/internal.h
index a4f90ba..9968dff 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -407,7 +407,6 @@ unsigned long reclaim_clean_pages_from_list(struct zone *zone,
#define ALLOC_HARDER 0x10 /* try to alloc harder */
#define ALLOC_HIGH 0x20 /* __GFP_HIGH set */
#define ALLOC_CPUSET 0x40 /* check for correct cpuset */
-#define ALLOC_CMA 0x80 /* allow allocations from CMA areas */
-#define ALLOC_FAIR 0x100 /* fair zone allocation */
+#define ALLOC_FAIR 0x80 /* fair zone allocation */
#endif /* __MM_INTERNAL_H */
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index f2844f0..551cc5b 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1737,20 +1737,14 @@ static bool __zone_watermark_ok(struct zone *z, unsigned int order,
/* free_pages my go negative - that's OK */
long min = mark;
int o;
- long free_cma = 0;
free_pages -= (1 << order) - 1;
if (alloc_flags & ALLOC_HIGH)
min -= min / 2;
if (alloc_flags & ALLOC_HARDER)
min -= min / 4;
-#ifdef CONFIG_CMA
- /* If allocation can't use CMA areas don't use free CMA pages */
- if (!(alloc_flags & ALLOC_CMA))
- free_cma = zone_page_state(z, NR_FREE_CMA_PAGES);
-#endif
- if (free_pages - free_cma <= min + z->lowmem_reserve[classzone_idx])
+ if (free_pages <= min + z->lowmem_reserve[classzone_idx])
return false;
for (o = 0; o < order; o++) {
/* At the next order, this order's pages become unavailable */
@@ -2550,10 +2544,7 @@ gfp_to_alloc_flags(gfp_t gfp_mask)
unlikely(test_thread_flag(TIF_MEMDIE))))
alloc_flags |= ALLOC_NO_WATERMARKS;
}
-#ifdef CONFIG_CMA
- if (gfpflags_to_migratetype(gfp_mask) == MIGRATE_MOVABLE)
- alloc_flags |= ALLOC_CMA;
-#endif
+
return alloc_flags;
}
@@ -2837,9 +2828,6 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
if (unlikely(!zonelist->_zonerefs->zone))
return NULL;
- if (IS_ENABLED(CONFIG_CMA) && migratetype == MIGRATE_MOVABLE)
- alloc_flags |= ALLOC_CMA;
-
retry_cpuset:
cpuset_mems_cookie = read_mems_allowed_begin();
--
1.7.9.5
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-02-12 7:30 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-12 7:32 [RFC 00/16] Introduce ZONE_CMA Joonsoo Kim
2015-02-12 7:32 ` [RFC 01/16] mm/page_alloc: correct highmem memory statistics Joonsoo Kim
2015-02-12 7:32 ` [RFC 02/16] mm/writeback: correct dirty page calculation for highmem Joonsoo Kim
2015-02-12 7:32 ` [RFC 03/16] mm/highmem: make nr_free_highpages() handles all highmem zones by itself Joonsoo Kim
2015-02-12 7:32 ` [RFC 04/16] mm/vmstat: make node_page_state() handles all " Joonsoo Kim
2015-02-12 7:32 ` [RFC 05/16] mm/vmstat: watch out zone range overlap Joonsoo Kim
2015-02-12 7:32 ` [RFC 06/16] mm/page_alloc: " Joonsoo Kim
2015-02-12 7:32 ` [RFC 07/16] mm/page_isolation: " Joonsoo Kim
2015-02-13 6:40 ` Gioh Kim
2015-02-17 5:24 ` Joonsoo Kim
2015-02-12 7:32 ` [RFC 08/16] power: " Joonsoo Kim
2015-02-12 7:32 ` [RFC 09/16] mm/cma: introduce cma_total_pages() for future use Joonsoo Kim
2015-02-12 7:32 ` [RFC 10/16] mm/highmem: remove is_highmem_idx() Joonsoo Kim
2015-02-12 7:32 ` [RFC 11/16] mm/page_alloc: clean-up free_area_init_core() Joonsoo Kim
2015-02-12 7:32 ` [RFC 12/16] mm/cma: introduce new zone, ZONE_CMA Joonsoo Kim
2015-02-12 7:32 ` [RFC 13/16] mm/cma: populate ZONE_CMA and use this zone when GFP_HIGHUSERMOVABLE Joonsoo Kim
2015-02-14 5:02 ` Gioh Kim
2015-02-17 5:25 ` Joonsoo Kim
2015-03-03 8:28 ` Aneesh Kumar K.V
2015-03-06 7:13 ` Joonsoo Kim
2015-03-18 10:03 ` Aneesh Kumar K.V
2015-03-20 4:28 ` Joonsoo Kim
2015-02-12 7:32 ` [RFC 14/16] mm/cma: print stealed page count Joonsoo Kim
2015-02-12 7:32 ` Joonsoo Kim [this message]
2015-02-12 7:32 ` [RFC 16/16] mm/cma: remove MIGRATE_CMA Joonsoo Kim
2015-03-05 16:53 ` [RFC 00/16] Introduce ZONE_CMA Vlastimil Babka
2015-03-05 17:48 ` Vlastimil Babka
2015-03-06 7:26 ` Joonsoo Kim
2015-03-17 9:46 ` Aneesh Kumar K.V
2015-03-18 6:01 ` Joonsoo Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423726340-4084-16-git-send-email-iamjoonsoo.kim@lge.com \
--to=iamjoonsoo.kim@lge.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=b.zolnierkie@samsung.com \
--cc=gioh.kim@lge.com \
--cc=hannes@cmpxchg.org \
--cc=heesub.shin@samsung.com \
--cc=lauraa@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=m.szyprowski@samsung.com \
--cc=mgorman@suse.de \
--cc=mina86@mina86.com \
--cc=minchan@kernel.org \
--cc=riel@redhat.com \
--cc=ritesh.list@gmail.com \
--cc=vbabka@suse.cz \
--cc=zhuhui@xiaomi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox